Search results

unless the model is stopped. If the model is stopped and the PGM file is changed, the file will automatically be reloaded (once SysCAD is reactivated). If

model has been moved from Alumina3.DLL to Alumina3Units.DLL New Change Model Unit command. This allows the user to change the underlying mathematical model

may encounter the error messages: Model DLL 'XBasic.dll' not Found, Invalid Model DLL List, please see missing DLL for instructions on how to fix the issue

configuration file of the project. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

either by DLL or Group. See Model Selection for more information on adding models to the configuration file. NOTE: In Build 136 or earlier, DLL = FlwLib

Species Tab. select the OLI dll from the TCE tab . Create a SysCAD project. Add OLI Model Configuration, load in the OLI Model .dll file complete the OLI Species

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

The output value will change from its current value to the setpoint at a fixed rate, i.e. a linear change. The fixed rate of change will be calculated based

are shown in Tank - Dynamic Mode. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

iteration size. The second column contains the SysCAD tag that must be changed at the specified time. The third column contains the value that must be

is distributed with the streams. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

page labels will be TC1, TC2, etc. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Model dbs file has been loaded. Note that the configuration can only be changed when the Chem Model dbs file has been loaded. The following table shows

Drum Filter. These models have also been moved from the Separ1.dll to the Separation.dll Build 21858: Implement support for multiple OLI ChemModels in same

supports optional multiple columns so if the current column number for this is changed at the same time, the Get Tag List can be used to report results in a corresponding

models must be changed to Alumina 3 Bayer Species Model and Precipitation3 models. Please solve and retune models. PGM Variable Name Change - Maximum length

configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

version required updated to version 8.2.2 from 7.4.0. Updated ChemApp DLL (ca_sc_e.dll) included with SysCAD. Tutorial: The Introductory Tutorial has been

Energy Change for a reaction or a system is: dG = dH - TdS where dG - Change in Free energy dH - Change in Enthalpy T - Temperature dS - Change in Entropy

to the unit will flow out of the 'Underflow' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

Data Sections for more information. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

pressure. The remaining mixture reports to the hotwell and the pressure is changed to the required hotwell pressure before exiting. The unit calculates the

the 'Feed' inlet will flow out of the 'Cake' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

and ScdSlv93.dll). The application type has been changed from "SysCAD.ScdApplication" to "SysCAD93.ScdApplication". The Program ID has changed from "SysCADSimulator

to the unit will flow out of the 'Underflow' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

tendencies of the OLI solids. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

connected to the unit will flow out of the 'Cake' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

so when the variable is changed the function is executed. In this case, the callback function sets the SysCAD tag to the (changed) value of Capacity. Capacity

the 'Feed' inlet will flow out of the 'Cake' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

Note: the feed option cannot be changed while the model is running but the percentages or store numbers can be changed while the model is running. The

Calculator Potash Liquor Calculator Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

configuring the model is: On the OLIModelCfg tab page, select required dll or for older dll formats the .dbs file from dropdown list. If only 1 database is available

concentrate in smaller fractions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

to the unit will flow out of the 'Underflow' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

The demonstration mode is selected when the AQSol00132.dll is selected in TCE Configuration. This DLL can be downloaded from www.phasediagram.dk. The user

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

calculation, then the equilibrium point will be adjusted to compensate for the changed boiling point. At this stage, only two phase flash calculations are handled

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Moved Belt Filter, Solvent Extraction Unit and Washer from Separ1.dll to Separation.dll. Compiled with Microsoft C++ 2017 making use of new features available

from Build137 to Build138. A summary table of the SysCAD 9.3 Build 138 changes are shown below. Please click on the Table heading for more information

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

2000. Moved Electrowinning Cell and Evaporative Dryer from Separ1.dll to HeatExchange.dll.

page contains the results fields. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

calculation, then the equilibrium point will be adjusted to compensate for the changed boiling point. At this stage, only two phase flash calculations are handled

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

undocumented and unsupported. Use with care! In future versions this may be changed, updated, extended or removed. In this example, we create a new project

selected on the "ConveyorBelt" Tab. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

user has changed a setting to 'On' it will remain in that state until the user changes it again): Phase Change at Mass Fraction (PhaseChange@MF). This

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Underflow and Overflow streams. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

constants must be tuned to achieve the correct yield. The constants can be changed in the PGM file (Precipitation_PGM) Bound Soda can be specified via 1) fixed %

required sub-models in each stage. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

to the unit will flow out of the 'Cathode' outlet, unless the user has changed the above field from 100%. In which case the user defined fraction of the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

unit will flow straight out of the 'Tailings' outlet; unless the user has changed the above field from 100%. In which case the user defined fraction of the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

spaced segments in between. NB if the number of data points to display is changed, SysCAD must be run for at least one iteration to refresh the display values

streams) may differ if the underflow and overflow solids targets have been changed. The solids fractions in the two volumes will trend towards the target value

OpenProject(ScdDir+ScdPrj) ## Open project Tags = Prj.Tags #### The tag naming was changed in the distributed examples for 138 goldFlow = "P_007.Qo.QM.Au(s) (oz/d)"

window will have this name. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

time to time due to: New Models may have been added through SysCAD version change, to use these new models, user must select them in this step of the Edit

connections should be connected). Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

controls. See also Hints and Comments. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

TagSelect reports. DllName Output Each SysCAD unit-model is stored and distributed in a "dynamic-link-library" (dll). The name of the dll where the unit-model

mapping issues. (AQSol resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (AQSol resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

Screen 2, Hydrocyclone Discontinued Mill-1 and Crusher-1 models have been changed to the Crusher2 model. Brief Description The project shows a very simple

Heads and Pipes are described below. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

mapping issues. (AQSol resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

species. The subsequent columns can be changed to display fractional flows, concentrations, etc. Users may change the number of columns displayed on this

layer (LXXX, VXXX, RBXXX). The layer number to be displayed can be changed by changing the LayerToView parameter at the top of the page either by manually

The fields are explained below: Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Diff tab pages are displayed using AQSol species, as defined in the AQSol DLL specified in the corresponding AQSol Model Configuration unit model. The species

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

Display of models used in a project that require a license AddOn. Display of DLLs and UnitTypes used in a project. Flowsheets Tab - Gives a list of graphics

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

model type for a unit can be changed once it has been inserted - see Change Unit. The Graphics Symbol can also be changed after the unit has been inserted

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

entered directly in an administrator cmd window): regsvr32 ScdIF93.dll regsvr32 ScdSlv93.dll SysCAD93.exe /regcomserver And when using OPC with SysCAD Dynamic

configuration file of the project. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

mapping issues. (ChemApp resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

SysCADxxx\Bin\DevLib.dll SysCADxxx\Bin\DevLibEx.dll SysCADxxx\Bin\DevUtils.dll SysCADxxx\Bin\FlwLib.dll SysCADxxx\Bin\FlwSlv.dll SysCADxxx\bin\KWDB.dll SysCADxxx\Bin\MdlBase

Precipitator3 Data Sections for full detail. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

the dll is not in the Bin folder update the configuration file so it is not trying to load an old dll. See Upgrading Project with Discontinued dlls.

window will have this name. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

configuration file of the project. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

modifying from the TCEs tab): DllPath C:\Program Files (x86)\AQSOLxxx\ This update is required to ensure that the correct AQSol dll is loaded. Note that the

page displays one Noise Controller. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Fix error in registering COM object scdslv92.dll on Windows XP. Build 11086: Fix for crash when using change model on Shell&Tube1. Build 11081: Improved

Python Example - External DLL Example - An example of driving a Dynamic project with python, while doing calculations in an external DLL Python Example - Programmatic

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

configuration file of the project. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

connected a vent stream to the unit. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

are chosen on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

independent PID is displayed one per page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

will be on a separate tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

discontinued - change to Crusher2 ===. These are legacy models with limited functionality and will be removed in the next version. Please change to the Crusher2

connected a vent stream to the unit. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

displays one Waveform Controller. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

warnings for the following conditions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Interval in 2 additional columns. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

will be on a separate tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

for a unit model can be changed using the Change Symbol function. To change unit operation graphics Symbol: Select the Change Symbol command Observe that

window will have this name. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

put into the last bucket/interval. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

a description of the variables. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

been changed or discontinued. If an old conversion type has been used in a PGM for a variable declaration then this will need to be manually changed to the

page displays one Statistic block. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

displays one Flow Statistic block. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

same SysCAD version If a client specific dll is required to open the project, then user need to obtain the client dll before the project can be opened. Files

Test Data for more information. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

34893 update released. Support for AQSol v3 DLLs with faster solve time Selection of fonts for Insert/Change Text Fix for reaction extent using User Calc

sets of data to be generated. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

results are displayed on this page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

determines the amount that the model will change in response to the estimated error every time the model weights are changed. This is similar to the gain in a

mapping issues. (AQSol resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

warnings for the following conditions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

into individual phase tables. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

sets of data to be generated. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

sets of data to be generated. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

Insert into Configuration file Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

ChemApp Light: The "ca_vc_l.dll" must be present in the utility folder. The "ca_sc_e.dll" has precedence over "ca_vc_l.dll", ChemApp Light users should

}[/math](2) which determines the time [math]\displaystyle{ \Delta t }[/math] for a change in concentration. import math import time import win32com.client as wc ##

warnings for the following conditions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

description of any of the variables. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

tendencies of the OLI solids. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

description of any of the variables. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

sets of data to be generated. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

warnings for the following conditions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

warnings for the following conditions. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

process. See Hints and Comments. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

follows the split as per liquid split. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

mapping issues. (PHREEQC resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

into individual phase tables. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

later step). Select the dll file for which you wish to create a database. Select -1 to create files which incorporate all of the dll files in the AQSol installation

AQSolxxx Installation: The AQSol package (each package comes with its own DLL) must be installed on the computer before the SysCAD project can be opened

review of code changes with two likely outcomes (a) some issue in the current code changes that requires fixing before release; or (b) the change is an understood

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

configuration file of the project. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

mapping issues. (OLI resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

of the ChemApp calculation. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

sets of data to be generated. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the

mapping issues. (ChemApp resulting species may change if the operating conditions change, so it is likely a change of temperature or feed composition will result

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

internal recirculating HTF stream. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Cut Size. Add the latter to the Trend Window so you can watch how these change as the optimisation proceeds. In some ways this is an example of curve fitting

required model list. Also make sure the "Include All Unit Models for selected Dlls" checkbox is ticked. Click on the Next>>> button You will now have a number

Boiler Water Makeup on demand mode: Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

how much makeup water is required. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

Implemented new keywords SetChangeTagOff and SetChangeTagOn which controls if MP or PGM files must be searched for any Change Tags. By default this is off

needed to desuperheat the steam. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

window will have this name. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

species with missing S25 data may find the stream entropy value may have changed. Species with missing S25 data will be assumed to have value of 0 at 0°C

have been changed and some have been removed, please see Audit and Audit in 138 for comparison. Please check reports and/or PGM files and change any old

window will have this name. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

to the DSp page used in Feeders. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the

ProBal thus not documented. Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models

access window will have this name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the