Plant Model

Navigation: User Guide ➔ Menu Commands ➔ View ➔ Plant Model

Project, Model and Solver Settings				Simulation Modes and Solver Setup			Solver Methodology, Convergence and Tolerance				Solving Models
Project Settings	Solver Settings	Plant Model	Constants	Simulation Modes	ProBal Setup	Dynamic Setup	Solver Status	Solver Methodology	Convergence Methods	Tolerance Testing	Evaluating Sub-Models	Flash Train	Mass & Energy Balance	Referenced Variables	Demand

---

Command Button:
Command Path:	View - Plant Model
Alternate Method:	Graphics Window right-click menu > View > Plant Model

---

The Plant Model Access Window gives the user access to a number of useful global settings for the project, as well as information about the system and the project.
There are a number of tab pages in the Plant Model access window, these are:

FlwSolve Tab	Settings Tab	Audit Tab	Project Tab	RC Tab	Species Tab	Views Tab	Soluble Tab	WaterQuality Tab	Qualities Tab
Environment Tab	System Tab	ModelList Tab	Flowsheets Tab	PrjNetworks Tab	Status Tab	Statistics Tab	States Tab	EvalSeq Tab	Globals Tab

1. FlwSolve Tab - Allows Access to: Spill and Vents reporting, Global Demand Configuration, Stop On Error, and PGM Timeout settings
2. Settings Tab - Allows access to: Species selection for Component Mass Balance (on unit operation basis), and Direct Link and Display Configurations settings.
3. Audit Tab - Allows access to Audit settings.
4. Project Tab - Allows user specified global values to be used in Custom Calculations and PGM files. Also allows the execution of a SetTag List report at the solution building stage the project.
5. RC Tab - Allows access to Range Checks.
6. Species Tab - Allows access to: Calculation method selection, VLE, Density and BPE option settings, Standard Properties Model selections (BPE and Density Correction), and Species count information.
7. Views Tab - Allows the user to add or remove information: Additional Properties Options, Material View Options (additional information on the species view tab), and Additional Display Comments.
8. Soluble Tab - Allows the user to set the Solubility displays.
9. WaterQuality Tab - Allows access to global water quality parameters. Only visible if the 'WaterQuality' properties option is selected on the Views Tab.
10. Qualities Tab - Allows access to additional qualities specification, based on selections made in the project configuration file, including LockUp, Material Tracking, Size Distributions, and Specific Surface Area (SSA).
11. Environment Tab - Allows access to additional qualities specification, based on selections made in the project configuration file, including Project Configuration Temperature & Pressure and Ambient and Environment Conditions.
12. System Tab - Allows access some SysCAD Version, SysCAD License and Project information. Useful for reporting.
13. ModelList Tab - Display of models used in a project that require a license add-on. Display of DLLs and UnitTypes used in a project.
14. Flowsheets Tab - Gives a list of graphics pages associated with the project. It is built dynamically after a project load. The main purpose of this is to allow user to activate/deactivate a graphics page externally through the use of macros.
15. PrjNetworks Tab - Shows information on the independent flow networks in the project.
16. Status Tab - Displays the message window status and the maximum error reported for the project.
17. Statistics Tab - Displays the Statistics for solver speed, processor usage, memory usage and so on.
18. States Tab - Displays the Statistics for the time that the solver spends in different states, e.g. ready, solving, stopping, paused. More detail is shown on the Plant Model - States - Full Detail tab.
19. EvalSeq Tab - Displays the Statistics for Network Evaluation.
20. Globals Tab - This page allows user to change global properties methods if available. This only applies to non-standard species models such as Alumina or Potash.
21. Info Tab - This is a common tab page for all access windows.