View source for Plant Model

[[Category:Project Configuration]]
{{Navigation|[[User Guide]]|[[Menu Commands]]|[[View Command Summary|View]]}}
{{Solver Header Table | currentpage=3 }}
----

{|
|-
|Command Button: || [[File:IconPlantModel.png]]
|-
|Command Path:  ||  View - Plant Model
|- 
|Alternate Method: || [[Graphics Window#Pop-up Access Menu on Graphics Window|Graphics Window right-click menu]] > View > Plant Model
|}

----

The Plant Model Access Window gives the user access to a number of useful global settings for the project, as well as information about the system and the project. <br>There are a number of tab pages in the Plant Model access window, these are:
{{Plant Model Tab Pages}}
#[[Plant_Model_-_FlwSolve|FlwSolve Tab]] - Allows Access to: Spill and Vents reporting;  Global Demand Configuration and Stop On Error and PGM Time out settings
#[[Plant_Model_-_Settings|Settings Tab]] - Allows access to:  Closure and Audit Settings ({{Removed139||y}}); Species selection for Component Mass Balance (on unit operation basis); and Direct Link and Display Configurations Settings.
#[[Plant_Model_-_Audit|Audit Tab]] - {{Available139}} Allows access to Audit Settings.
#[[Plant_Model_-_Project|Project Tab]] - Allows user specified global values to be used in [[Calculation_Configuration#User_Defined_Constants|Custom Calculations]] and PGM files; also allows the execution of a SetTag List report at the solution building stage the project.  
#[[Plant_Model_-_RC|RC Tab]] - Allows access to Range Checks.
#[[Plant Model - Species|Species Tab]] - Allows access to:  Calculation method selection; VLE, Density and BPE option settings; Standard Properties Model selections (BPE and Density Correction); and Species count information.
#[[Plant Model - Views|Views Tab]] - Allows the user to add or remove information: Additional Properties Options; Material View Options (additional information on the species view tab); and Additional Display Comments.
#[[Plant Model - Soluble Tab|Soluble Tab]] - Allows the user to set the Solubility displays.
#[[Plant Model - Water Quality|WaterQuality Tab]] - Allows access to global water quality parameters.  Only visible if the 'WaterQuality' properties option is selected on the [[Plant Model - Views|Views Tab]].
#[[Plant_Model_-_Qualities|Qualities Tab]] - Allows access to additional qualities specification, based on selections made in the project configuration file.  These may include: [[LockUp]]; [[Material Tracking]]; [[Size_Distribution_(PSD)#Changing_Size_Distributions|Size Distributions]] and [[Specific Surface Area (SSA)]] .
#[[Plant_Model_-_Environment|Environment Tab]] - Allows access to additional qualities specification, based on selections made in the project configuration file.  These may include: Project Configuration Temperature & Pressure and Ambient and Environment Conditions; 
#[[Plant_Model -_System|System Tab]] - Allows access some SysCAD Version, SysCAD License and Project information.  Useful for reporting.
#[[Plant_Model_-_Model List|ModelList Tab]] - {{Available138|24442}} Display of models used in a project that require a license AddOn. Display of DLLs and UnitTypes used in a project.
#[[Plant_Model_-_Flowsheets|Flowsheets Tab]] - Gives a list of graphics pages associated with the project.  It is built dynamically after a project load.  The main purpose of this is to allow user to activate/deactivate a graphics page externally through the use of macros.
#[[Plant_Model_-_PrjNetworks|PrjNetworks Tab]] -  Shows information on the independent flow networks in the project.
#[[Plant_Model_-_Status|Status Tab]] - Displays the message window status and the maximum error reported for the project. 
#[[Plant_Model_-_Statistics|Statistics Tab]]  - Displays the Statistics for solver speed, processor usage, memory usage and so on.
#[[Plant_Model_-_States|States Tab]]  - Displays the Statistics for the time that the solver spends in different states, e.g. ready, solving, stopping, paused. More detail is shown on the [[Plant Model - States - Full Detail]] tab.
#[[Plant_Model - EvalSeq|EvalSeq Tab]]  - Displays the Statistics for Network Evaluation.
#[[Plant Model - Globals|Globals Tab]] - This page allows user to change global properties methods if available.  This only applies to non-standard species models such as [[Alumina_3_Bayer_Species_Model#Global_Properties_Calculation_Method_Selection|Alumina]] or [[Potash Species Model#Selecting Laliberte' methods for Property Calculations |Potash]].
#[[Plant Model Info Page|Info Tab]] -  This is a common tab page for all access windows.