Search results

easiest way to create the Get Tag List is by using MS Excel. The Get Tag List format and example is given above. Once the Get Tag List is created, save it as

The Get Tag List model also supports optional multiple columns so if the current column number for this is changed at the same time, the Get Tag List

; 1) [[Set Tag List]] Model is used to Set the user defined data ; 2) [[Get Tag List]] Model is used to report the required value (with GetAtEnd option

lines within their set tag list by starting the line with a semi-colon (;), similar to PGMs. This also applies to Get Tag List Model. The Environmental Heat

version released in January 2009. Implemented new Get Tag List Model. New Alumina 3 Bayer Species Model. (Note that if you were using earlier Build 126 versions

Orderby [Graphic] [Parent.Tag] [Index], Groupby [Parent.Tag] [Tag] BoldHeading:1, Clear: On) To create a list for all the PIDs: SysCAD_TagSelect(PID, V,50,1000

use the "Copy Tag for PGM" option to Copy the Tag from Access Window Right click popup list Use Copy Tag (without the model name) when a tag is being concatenated

when mouse hovers over the drop list field includes 'Underlying tag is a String type' in the description. When making the droplist selection from a PGM

and PGMs Set Tag Controller - the user may carry out the simple ratio control and set multiple tags using the the Set Tag Controller model. The diagram

Variable Tag: some report type (e.g.: Tag List report) requires the Full Variable Tag, please use Copy Full Tag to copy the tag. Primary tag: When a full

a simple list of all models. Flange Flows is a list of all flanges (the connection flange objects between pipes and models). Tears is a list of all Solver

and choose the Copy Graphics, Tag List to Clipboard option, then paste them into MS Excel. To obtain an equipment list for a selected graphics page, from

stricter model tag naming rules by not allowing four more symbols in tag names (\ ' " and ;). Give error message at project load if any models contain illegal

Build139 or later, user can get the used/unused species list directly from Plant Model - Species tab. How to generate a list of Species with Flow, useful

implemented as a Species Properties Model but as a unit model for use at appropriate locations in a plant model. These models use OLI Systems leading Electrolyte

Exec(Criteria_Tag, false, false) ; find total number of SpeciesChanges SpciesChangeCount = SpeciesChanges.GetLen() ; get all species change flows flow_tag = Concatenate("

vapour and liquid species in the model or stream. The VLE sub-model is used in a number of unit models. Different models may have options to specify some

first section, Model. Model determines which species model the feeder uses. The options available to the user will depend on the species model used by the

allows the user to set some solver related tags as well as display the current status for the SysCAD application. Tag groups on this tab include: Project Solver

Data dialog box will bring up the following pop up list: For most of the options on the pop up list, they are simply an alternate method to access the

Analysis - scenarios, tag list document, command script and COM automation. Topics covered in this document include: Using sub models in the unit operation

variable, user may get "Unknown tag "GM.IOs.[P_002].Splt.H2O(l) (%)'", this is because the [] function expects a full tag instead of partial tag. Please see troubleshooting

Marshal IO tag list must be made directly in the tag list file, there is no user interface in SysCAD or SysCAD Marshal to manage the tag list. When adjustment

SysCAD_SetTagList(ReportName, Tag Location (either H or V), Search Length). These parameters are explained in Basic Format of a simple Get Tag Report. Some

of a changed tag. This is relevant to the Get Tag List, Set Tag List, Plant Model Set Tag List, Events, Profile and Queue Profile models, as well as the

Navigation: Models ➔ Control 2 Models ➔ Profile Controller The Profiler model is only used in Dynamic projects. It allows users to vary input parameters

mathematical model is attached to some selected graphics from the DXF drawing. The unit model's mathematical model and its graphics are linked by a tag name:

Controller or Model Procedures; Tags may also be set from any of the following units: Set Tag List Model, Profile Model, Events Model, Queue Model, Noise Model

right click on the tag and select "Open Find Results" menu option (or press F8) to get a list of values for this tag in all unit models of the same type

PGM Include Files, Get Tag List, Set Tag List, Plant Model Set Tag List, Task Model, Events Model, Profile Model, Queue Profile Model, Command Scripts A

Tag List Step 3: Create 2 csv files, one containing the User Defined values for the Set Tag List and another containing the results for the Get Tag List.

Au(s) (oz/d)" print ("Gold in product", end=" ") print (Tags.TagValue(goldFlow)) ## Get a tag value Solver = Prj.Solver ProBal = Solver.ProBal ProBal.Start()

class name to the unit model tag through use of UnitTag = ClassTag() within the class definition, then we can use the unit tag name as the class instance

you can use any of those that you see in the list when you insert a unit model, or just "*Default*" to get the default symbol. The final parameters are

}[/math] = Standard Deviation For all methods, the tag PlantModel.RandomSeedAtStart (set on the Plant Model - FlwSolve page) affects the repeatability of the

the SysCAD Excel Get Tag Reports, the tag "Graphic" may be used to report the name of the graphics window that the unit is on. See List Graphics Symbols

SysCAD finds a blank column or an invalid tag, all remaining tags are ignored. Queue Profiles do not support string tags. The columns in the profile should contain

stage. If the Set Tag List or General Controller appear to be setting tags too late, then consider using the Set Tag List in the Plant Model - Project or methods

Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet

first section, Model. Model determines which species model the feeder uses. The options available to the user will depend on the species model used by the

example 2 on how to set up user calculations. The model is not currently sensitive to pH or temperature. The model assumes that the pH and temperature are correct

iteration is treated as a "one second time increment". The PID Output tag and the Measured tag, will have coloured triangles shown in the access window of those

FEM model is used in an overall plant model, the user has no direct control over which species are present in the feed, and consequently the model may

sets SysCAD tags at regular intervals using a profile that is read in from a CSV file. The Scheduled Events model will set a single SysCAD tag to a required

Navigation: Models ➔ Control 2 Models ➔ Scheduled Events This model is used in Dynamic Simulation only. This unit is similar to the Downtime model and the

inlet stream has a quality model, all the outlet streams will have the same quality models. Unless in some cases where a unit model can be configured to prevent

species model in the configuration file as shown below. It is then possible to select the Bayer model (either Bayer3 or a client-specific Bayer model). On

contain a number of documents, these may include: Model files - ModelData.db3, stores the project model data. Graphics files - xxxx.DXF and xxxx.scg file

Navigation: Models ➔ Control 2 Models ➔ Signal Waveform Controller The Signal Waveform Controller model is used in Dynamic projects. It allows input of

imbalance in the model, user will be given a warning, to prevent this, make sure the steam supply is auto adjusted via General controller / Set Tag Controller

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

incorporated into the SysCAD model using a General Controller. The unit cost would be an input parameter to the model and the model would use the calculated

Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet

Condensed or Mass Condensed Tag - The maximum amount (mass flow) to be condensed is specified by the user or set equal to a tag. Fraction Condensed - The

within the model. If the Select statement includes [SubType] then the TagSelect Engine returns full SubType model tags (including dots in the tag) rather

from the model. The Falling Film Evaporation Project, which is distributed with SysCAD in the Examples folder, demonstrates the use of this model in a SysCAD

SetAt(2, Tag3) TagGroup.SetAt(4, "P_7.To (C)") Required_Tag= TagGroup.GetAt(1) See also Example PGM to create a Unit Tag List

historical tag values but will retain the list of tags that are recorded in the data historian. Delete button: This will delete all the historical tag values

equation given above. This section contains a list of Error Messages that you may get when using the EHX sub-model. It includes reasons why you may see these

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

is connected but there is no vent stream, then the user will get a warning but the model will still function. If there is no vent stream, all vapours will

reverse order. Change Tag now includes changing of tags referenced in PID functions and in data fields for General Controllers marked as {tag} variables. Reroute

the input list. The report used to get a list values from SysCAD to Excel is: SysCAD_TagList Report Type This is shown in Columns D('SysCAD Tags) & E(Results

Partition Curves Whiten Crusher Model Selection/Breakage Models Test Data The specific model is selected with the Method drop down list on the Crusher2 or Crusher

and reset based on rules for each of the Downtime events. The model can then set a single tag to an Active or Inactive value, depending on whether the unit

Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

NOTE: This model is being phased out and will be removed in future versions (refer to Discontinued Models and Dlls). In Build 139, to add this model to the

Engine only returned a list of model tags that meet a specified criteria. It is now possible to get a list of all SubModels or SubTypes that meet a specified

stags, running the model, then getting the values from tags in the list gtags. We are using a wrapper around COM, implemented in the module SysCAD.syscadif

mode. Industry related models - e.g. General Alumina models. The General Alumina model contains a generic Bayer Liquor Properties model for use when simulating

project save names, most of the SysCAD model tag naming rules also apply to these. Please see Model Tags for list of the illegal characters. If any existing

Sugar properties model from the list as show below: In Step 2 of edit configuration file, make sure all the required compounds (under the Model Theory section)

Navigation: Models ➔ Sub-Models ➔ Embedded Heat Exchanger (HX) Related Links: Evaporator, Potash Evaporator The Embedded Heat Exchanger is used in the

April 2024 - SysCAD 9.3 Build 139.35250 Related Links: General Controller, Model Procedures, Example PGM Files, Frequently Asked Questions, Notepad++ Auto-complete

contain a number of documents, these may include: Model files - ModelData.db3, stores the project model data. Graphics files - xxxx.DXF and xxxx.scg file

exchangers. This model allows the user to embed these heat exchangers as part of the model. (This is often more efficient when carrying out the modelling calculations

(kg/h),292 CSTR.TankVolume,300 Text file Get Tag List Report Template Example: ReportListCriteria.csv (partial) Tag ;Plant Feed Characteristics ;Ore Slurry

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

Projects ➔ SysCAD 9.3 Tag Changes Related Links: Build 136 Release Notes, SysCAD Tags Changes affecting various types of tags and tag management new to SysCAD

information. The key representation of the model is the Graphics Window which is typically used to construct a model in a project. Other windows are used to

= syscadif.SysCADCom() After a project is loaded, you can get and set tags, and run the model or scenarios. For convenience, operators __getitem__ and __setitem__

"Main" Tab. Set Tag List Report - Used to set a list of user specified values from Excel to SysCAD. Please See "Criteria" Tab, Column G. Tag List Report - Used

function to retrieve a list of model tags meeting a SQL type select query, similar to the Excel Tag Select Reports. A list of all SubType tags, for example reaction

for folder/file paths. The RefTag list is for user information only, it builds and displays a list of all the reference tags used in the projects. These

Navigation: User Guide ➔ Getting Started ➔ Tutorial ➔ Tutorial Videos Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 Related Links:

tools for model (SysCAD Project) optimisation. Python Example - Simple Unit Model Testing Framework - For validating model results when doing model development

want to set/get. For example GetDynTag(s) or GetDynTag(strcat(PipeTag, ".Qm (t/h)")). For SetDynTag() and GetDynTag() the checking of the tag validity is

only limited to the unit model variables, they can be also include driver tags. NOTE: Tag names are NOT case sensitive. A tag is NOT checked to see if

generating an Excel report and then find & correct any tags in Excel. Data Historian: If a tag has been added to the historian at any time (even if it

Navigation: User Guide ➔ View ➔ Plant Model ➔ FlwSolve This tab page on the Plant Model Access Window has a number of parameters that the user may either

multi-layered screen model that replaces the original Screen model. It includes all of the features of the original screen model, as well as: Allows the

columns, but all the possible tags always work even if they are not visible on the access window display. If you have referenced a tag from the matrix (e.g. in

from Case 1. The Case1 Report is a SetTagList Report, as shown in Cell E6, the subsequent reports are SetTagListOffset reports. (The image below shows

Notes: The Makeup Block is a sub-model which is evaluated sequentially. The user can change the order that the sub-models are solved using the drop down

Navigation: User Guide ➔ View ➔ Plant Model ➔ Range Check This tab page on the Plant Model Access Window allows the user to set up range check related

important inputs to the model can be set from the Model Criteria Inputs to the model are well laid out and comprehensive Results Reports: Model Criteria Output

SysCAD with the tags we want to adjust for opimisation set to these values, and return our calculated error. We have a list of optimising tag strings, and

be ignored. The Array class allows user to Get / Set numeric values only. Please see StrArray Class for getting/setting String values. None The examples

to change the model over to an alternate, improved model. During this grace period, discontinued models should still load and project will run as is. However

variables listed in the Standard constants list variables listed in the Special constants list variables listed in the Special variables list names used

Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet

the species database (see Boiling Point Elevation for Std Model), or the unit uses a species model with an Elevated Boiling point calculation, then the equilibrium

FeederTag@{Tag}{Comment("Expect a valid Feeder Tag (Class instance name)")} Bit ValidTag, ValidModelType, ValidReference@ string SourceConnector@{Tag}{Comment("Uses

access a tag directly. However, using the transmitter can improve the display of the control logic on a flowsheet and better represent the actual equipment

Improved options for setting tag text sizes in graphics for units and links. New Tag menu section on the Graphics menu for tag manipulation. Build 13306:

some tag changes have been made, you may need to fix referenced tags in controllers, etc. The solver may not start until you have resolved the tag name

NOTE: This model is being phased out and will be removed in future versions (refer to Discontinued Models and Dlls). In Build 139, to add this model to the

conversion family specifies the group of conversions the tag belongs to. It also allows setting/getting the tag value correctly from Trends, Excel, etc. using any

display the SolutionImpurities in the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material flow section

"Species_With_Flow" list. The "Species With Flow" list is then compared to the full species list, thus creating a "Species No Flow" list by difference. The

Project User Value 1 (set in Plant Model) (equivalent to Q) Val(2) = reference to Project User Value 2 (set in Plant Model) (equivalent to K') C_Li = a previously

the way the project runs. The "models".cfg, SysCAD.93.db3 and ModelData.db3 files contained data related to the process model library (tanks, pipes etc.)

Shows the use of ChemApp Model Configuration. Shows the use of ChemApp Direct Calc Model Shows the use of ChemApp Side Calc Model Shows the use of ChemApp

their own model procedures (MP) to be evaluated as part of some unit models. It is like having a PGM inside a Tank, Tie or Pipe model where the code is

will get 100 t/h coming out to the sink XPG_002. In Steady State (and Transfer Push) the flow is effectively controlled at the inlet. The same model in Dynamic

fetch values local to the current Tie model. Therefore when fetch values, unit Tag name is not used. Use the Get() function to retrieve values from SysCAD

from Case 1. The Case1 Report is a SetTagList Report, as shown in Cell E6, the subsequent reports are SetTagListOffset reports. (The image below shows

the IO list: The IO List (Marshal OPC Client Tag List) can be edited by editing the Marshal_Tags.db3 directly. This is where user defines the tag matching