Search results

in exactly the same version; Both projects must use the same model configuration (.cfg) file (and by implication the same species database); Both projects

version change, to use these new models, user must select them in this step of the Edit Configuration file. Some models are restricted by license agreement

up List Creates a new configuration file Copy an existing configuration to create a new file Removes an existing configuration file from the list Browse

Navigation: Models ➔ Common Sections ➔ Material Flow Section Related Links: Common Content Section, Calculation Configuration This section is used to display

environment settings. To access these tags in PGM or Model Procedure (MP) files, please see Plant Model Class. The standard dry air composition is taken from

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration This tab page allows the user to create and organise a list

calculations: Create a Configuration File, select the OLI models in step 1 of 2 of edit configuration file, In Step 2 of 2 of edit configuration file, select the

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ General Configuration Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

select "Project Configuration" Use the "Browse" button to find the "cfg file" we have created in Step 1 Press "Edit" to edit the selected cfg file In Step 1

Open the cfg file within the CfgFiles folder using a text editor. Search for "[OLI]" to locate the OLI section of the file. Update the cfg file in a similar

projects and cfg files. When editing or selecting a project Configuration (cfg) file there is a new "Last Accessed" column showing when a cfg file was last

Projects require different configuration file. Go to Edit - Project Configuration (cfg file) to make sure the correct configuration file is present in the required

Qualities Models for a general description of how to use qualities models. All models are available with a Steady State or Dynamic license. Some models require

name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

adding models to the configuration file. The Size Distribution quality requires further configuration, including defining of a sieve series in the cfg file

Videos ➔ Project Configuration Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 Related Links: Project Configuration (cfg File), Species Database

Z-NNNNN\database. Edit the configuration to: select the PHREEQC models in step 1 of edit configuration file, in Step 2 of edit configuration file - TCEs tab, select

SysCAD configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to

folder. Create a Configuration File, select the AQSol models in step 1 of 2 of edit configuration file, In Step 2 of 2 of edit configuration file, select the

SysCAD configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to

specification, based on selections made in the project configuration file.

of edit configuration file, in Step 2 of edit configuration file - TCEs tab, select the location of the ChemApp_DAT_File folder (point 2 of workflow) and

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ TCE Configuration Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

can define their own custom calculations in the configuration (cfg) file. Refer to Calculation Configuration for more information. There could be a few reasons

settings in the configuration A configuration (cfg) file is used for common configuration for use by multiple projects. The configuration file can only be

name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

SysCAD configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to

Navigation: Models ➔ Common Sections ➔ Material Content Section Related Links: Common Content Section, Calculation Configuration This section is used to

unnecessary temporary backup file in user temp folder of cfg while loading a project. This caused a conflict when editing a cfg file and opening a project in

page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

algorithms and unmapped species TCE Configuration Options - This page documents the extra configuration file (cfg) options required when using TCE Add-On

or deactivating flowsheets via the Plant Model - Flowsheets tab has changed. Project Configuration (cfg File) is upgraded to be a Dynamic or Steady State

Precipitation and Classification with PSD Added column to sort configuration (cfg) files by access date. Improved project save/load. 14 Sep 2021 Build 139

Calculations) in the Project Configuration (cfg File) which will be displayed on the Species flow page. Refer to Calculation Configuration for more details. The

Start SysCAD 9.3 and go to Edit Project Configuration and edit the project configuration file. The configuration file will automatically be upgraded as well

name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

Project Configuration (cfg File) for Steady State (ProBal) and Dynamic projects shown in separate lists. Provides clearer management of selected models and

set in the models configuration file (.cfg). For more information on the models configuration file, please see What is a configuration file?. Once the

Navigation: Models ➔ Sub-Models ➔ Reaction Block Summary Many SysCAD models have the facility to allow the user to enable chemical reactions in the unit

SysCAD configuration (.cfg) file. Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to

new project we need to specify a configuration file and project name. Using the distributed gold example configuration, we can say >>> root = 'C:\\SysCAD138\\Examples\\25

sub-models in a pipe. The user can select the sequence in which the sub-models act, however the pressure drop is applied first. To enable sub-models the

Navigation: Models ➔ Other General Models ➔ DirectLink The DirectLink model is automatically created. Most DirectLinks are a direct link I/O (input/output)

Project configuration file. If a species exists in more than one phase, it will be shown in each phase, e.g. H2O(l) and H2O(g). This Tab allows the user to

changed to only ONE solve mode can be selected per configuration file. So each Project Configuration (cfg File) can be used for either Dynamic OR Steady State

information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting units.

the way the project runs. The "models".cfg, SysCAD.93.db3 and ModelData.db3 files contained data related to the process model library (tanks, pipes etc.)

later. If the Include All Unit Models option has been enabled in the cfg file (refer to Model Selection), then all the unit model types are already displayed

require further configuration, for instance: Size Distribution (PSD) - sieve series must be defined in the cfg file (refer to Size Configuration). Specific

Controllers. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert

follows: A project configuration file is set up with a set of user-defined chemical compounds (via SysCAD Species Database and Configuration File). A process

information. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

projects using the cfg file located in the CfgFiles folder will use the same IonList.txt file. In Build 138 if the file is not located in CfgFiles it will use

Calculations) in the Project Configuration (cfg File) which will be displayed on the Species content page. Refer to Calculation Configuration for more details. The

(Engineering Units) Adding and Modifying Conversions Project Configuration (cfg File) Plant Model Project Settings Solver Setup - Steady State Projects Solver

creating new cfg files (or making copies of existing cfg files) has a number of new options to select solver mode and some groups of models. The actual

the field tags. Project Configuration (cfg File) is upgraded to be a Dynamic or Steady State. May need to edit project or cfg file to correctly select solver

version of the configuration file (SOP Example_Dyn.cfg) including Dynamic controllers, and open the project with the Alternate Configuration. There are also

Rearranged some model DLL file names and the models in these DLLs. For Build 133 and 134, the cfg file has separate sections for DLL and model lists so that

outputs to assist in reporting. Quickview ini file now saved in cfg files folder (not in project) Improvements to Demand logic - separated flash train and

reports and/or PGM files and change any old tags that may no longer work. Some miscellaneous tag changes have been made in various unit models to achieve consistency

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Size Configuration Related Links: Size Distribution (PSD), Size Distribution Definition

state of models is now retained for cut&paste. Build 13655: Added option to browse for cfg file or unzip backup if opening project and cfg file is not found

Navigation: Models ➔ TCE Models ➔ Thermodynamic Calculation Engines ➔ TCE Species Mapping Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Species Configuration Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

One or more configuration files with extension cfg. For example: Basic.cfg or NickelCopper.cfg The project group Species data base file and the project

constants to trigger subroutines as soon as possible. When starting a new PGM file the trigger subroutines are contained in the standard PGM template. Where

project. If the configuration file is using the registry location, then it should find the OLI engine. However, if the configuration file is using the path

popup option, clicking on this will activate the "Windows File Explorer", showing the folder or file of interest. If the document can be edited, then "Edit

Access the SysCAD version or build number in PGM or Model Procedure (MP) files, please see Plant Model Class.

Navigation: PGMs ➔ Example PGM Files ➔ Multi-Step Trigger Related Links: Trigger Subroutines Where multiple steps are required to re-configure a unit operation

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Species Properties Configuration Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build

Navigation: Models ➔ TCE Models ➔ PHREEQC ➔ Utility Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This help file is applicable to PHREEQC

Start SysCAD and go to Edit Project Configuration and edit the project configuration file. Ensure that the models list and species list are as required

them to the configuration file. If you wish to Add sulfuric acid to a project, you need to include both species in the configuration file. SysCAD will

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ Species Calculations The user may add any number of Species

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ User Property Calculations The user may add any number of

Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models to the configuration file. Insert

SysCAD database and configuration files. The IPhaseMap.txt file is used to map between phase names in the ChemApp model file (CST or DAT file) and individual

Navigation: Models ➔ TCE Models ➔ AQSol ➔ Utility Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This help file is applicable to AQSol

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ Species Calculation Expressions NOTES: Function SumPhase()

Options Colours. Each unit type has its own default Quick View list configuration. Most models have default lists configured. However, the user can customise

at least one AQSolModelCfg model. The AQSol Evaporator operates in standalone or Flash Train modes. Project Configuration AQSolModelCfg The AQSol001 dll

PHREEQCModelCfg model. We have used two PHREEQCModelCfg models in this project, one we allow supersaturation of gypsum. Project Configuration PHREEQCModelCfg

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ User Property Expressions NOTES: Function SumPhase() has

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Size Configuration ➔ Size Distribution Related Links: Size Distribution (PSD), Size

Navigation: Models ➔ TCE Models ➔ OLI ➔ Utility Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This help file is applicable to OLI.

controller. Project Configuration ChemApp Model Configuration: A predefined ChemApp Model definition file: CNO.dat is used in this project. This file can be found

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

to Edit Project Configuration and edit the project configuration file. Ensure that the species list is as required. The configuration file in SysCAD 9.2

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

The DEFAULT species model for the project needs to be set in the Project Configuration file (cfg). Once the default species model has been set, any new

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Project Configuration for more information on adding models to the configuration file. Insert

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

name. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into

in the configuration file is a quick and easy way of making data available in all streams. During editing of the configuration file, '.cfg' file, on the

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

correct SpModel in many unit models, where projects have multiple SpModels available. Miscellaneous improvements to Sugar species and unit models. For PSD

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

Insert into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. Insert into

makeup. Species Calculations are defined in the Rare Earths Example configuration (cfg) file and used in the project to show: Equivalent rare earth oxides (and

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ User Property Calculations ➔ Alumina Properties Examples

Edit|Project Configuration. Follow instructions given in Project Configuration (cfg File) to add NH3(g) and NH3(l) to the project configuration file. When this