Plant Model
(Redirected from PlantModel)
Jump to navigation
Jump to search
Navigation: User Guide ➔ Menu Commands ➔ View ➔ Plant Model
| Project, Model and Solver Settings | Simulation Modes and Solver Setup | Solver Methodology, Convergence and Tolerance | Solving Models | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Project Settings | Solver Settings | Plant Model | Constants | Simulation Modes | ProBal Setup | Dynamic Setup | Solver Status | Solver Methodology | Convergence Methods | Tolerance Testing | Evaluating Sub-Models | Flash Train | Mass & Energy Balance | Referenced Variables | Demand |
| Command Button: | 
|
| Command Path: | View - Plant Model |
| Alternate Method: | Graphics Window right-click menu > View > Plant Model |
The Plant Model Access Window gives the user access to a number of useful global settings for the project, as well as information about the system and the project.
There are a number of tab pages in the Plant Model access window, these are:
- FlwSolve Tab - Allows Access to: Spill and Vents reporting; Global Demand Configuration and Stop On Error and PGM Time out settings
- Settings Tab - Allows access to: Closure and Audit Settings (removed in Build 139); Species selection for Component Mass Balance (on unit operation basis); and Direct Link and Display Configurations Settings.
- Audit Tab - Available from Build 139. Allows access to Audit Settings.
- Project Tab - Allows user specified global values to be used in Custom Calculations and PGM files; also allows the execution of a SetTag List report at the solution building stage the project.
- RC Tab - Allows access to Range Checks.
- Species Tab - Allows access to: Calculation method selection; VLE, Density and BPE option settings; Standard Properties Model selections (BPE and Density Correction); and Species count information.
- Views Tab - Allows the user to add or remove information: Additional Properties Options; Material View Options (additional information on the species view tab); and Additional Display Comments.
- Soluble Tab - Allows the user to set the Solubility displays.
- WaterQuality Tab - Allows access to global water quality parameters. Only visible if the 'WaterQuality' properties option is selected on the Views Tab.
- Qualities Tab - Allows access to additional qualities specification, based on selections made in the project configuration file. These may include: LockUp; Material Tracking; Size Distributions and Specific Surface Area (SSA) .
- Environment Tab - Allows access to additional qualities specification, based on selections made in the project configuration file. These may include: Project Configuration Temperature & Pressure and Ambient and Environment Conditions;
- System Tab - Allows access some SysCAD Version, SysCAD License and Project information. Useful for reporting.
- ModelList Tab - Available from Build 138.24442. Display of models used in a project that require a license AddOn. Display of DLLs and UnitTypes used in a project.
- Flowsheets Tab - Gives a list of graphics pages associated with the project. It is built dynamically after a project load. The main purpose of this is to allow user to activate/deactivate a graphics page externally through the use of macros.
- PrjNetworks Tab - Shows information on the independent flow networks in the project.
- Status Tab - Displays the message window status and the maximum error reported for the project.
- Statistics Tab - Displays the Statistics for solver speed, processor usage, memory usage and so on.
- States Tab - Displays the Statistics for the time that the solver spends in different states, e.g. ready, solving, stopping, paused. More detail is shown on the Plant Model - States - Full Detail tab.
- EvalSeq Tab - Displays the Statistics for Network Evaluation.
- Globals Tab - This page allows user to change global properties methods if available. This only applies to non-standard species models such as Alumina or Potash.
- Info Tab - This is a common tab page for all access windows.