Search results

The values will appear on a new tab page called 'WQ'. Note: As defined on the Plant Model - Water Quality Tab, some calculations require specific aqueous

option is ticked on the Views Tab of the Plant Model, then the basis can be selected for each individual column on the Sp page. If the BasisPerColumn option

views. WQ - Optional tab, this tab is only visible if WaterQualities in the Plant Model - Views tab page is ticked. DSp - this Tab contains the breakdown

This Tab is not visible if the unit is a Sink. WQ - Optional tab, this tab is only visible if WaterQualities in the Plant Model - Views tab page is ticked

(Thermodynamic) Properties on the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material flow section.

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Acidity (pH), Charge, Transport Related Links: Common Content Section This section is used

may enable the Phase Change @ T function Globally in the model (see Plant Model - Species tab page). SysCAD will automatically change the species as required

either by from "Plant Model - Views tab page", select the "Transport" tickbox or by pressing the "Include Properties" button on the pipe Qo tab and select "Transport"

will result. Sz Tab Page The variable display selection can be altered globally from the menu command View | Plant Model - Qualities Tab page. The view below

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Acidity (pH), Charge, Transport Related Links: Common Content Section This section is

chosen to display the Energy (Thermodynamic) Properties on the Plant Model - Views tab page.

implemented as a Species Properties Model but as a unit model for use at appropriate locations in a plant model. These models use OLI Systems leading Electrolyte

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Solution Impurities, H2O Properties Related Links: Common Content Section This section is

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Density Correction, Solubility, Saturation Related Links: Common Content Section This section

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Solution Impurities, H2O Properties Related Links: Common Content Section This section

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Density Correction, Solubility, Saturation Related Links: Common Content Section This

Update to not include Qualities Models on Plant Model - Qualities tab page (and in Feeder select Qualities) if Quality model is NOT selected in the cfg file

Automatic Phase Change has been switched off globally on the Plant Model - Species tab page. PhaseChange@MF is not able to be switched on locally this way

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Heats of Combustion, Heating Values Related Links: Common Content Section This section is

they themselves are on. The Page name of each flowsheet (Page1, Page2, etc.) can be found on the Plant Model-Flowsheets tab page. Alternatively, the full

option is ticked on the Views Tab of the Plant Model, then the basis can be selected for each individual column on the Sp page. If the BasisPerColumn option

the report. The graphics page list (mapping of page numbers to flowsheets) can be found in PlantModel - Flowsheets Tab. "Page" is case sensitive and must

Windows. Via View - Plant Model - Flowsheets Tab. NOTE: When running the pages separately, please make sure all feeders to individual pages are configured properly

which method to use in the project using tag PlantModel.DensityCorrection - see Plant Model-Species tab page. The user may view the density of a solution

Deactivating pages, including from PGMs has been improved and is more robust. Project Networks Information - A new tab page has been added to the Plant Model access

The values will appear on a new tab page called 'WQ'. Note: As defined on the Plant Model - Water Quality Tab, some calculations require specific aqueous

shown on the Plant Model - States - Full Detail tab. EvalSeq Tab - Displays the Statistics for Network Evaluation. Globals Tab - This page allows user to

Hyperlinks to external documents. MP tab - Optional tab, only visible if Procedures have been enabled on the Info tab page. Links tab, contains a summary table for

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Heats of Combustion, Heating Values Related Links: Common Content Section This section

section. The values will appear on a new tab page called 'WQ'. Note: As defined on the Plant Model - Water Quality Tab, some calculations require specific aqueous

Navigation: User Guide ➔ View ➔ Plant Model ➔ Views This tab page allows the user to set the display options for stream / content properties display. NOTE:

species model, improved display for Solubility on Props tab page. Remove unused EquivFactors on PlantModel Globals tab page (they are on Solubility tab page)

Navigation: Models ➔ Control Models ➔ General Controller Related Links: PGM, Example PGM Files This is used to simulate plant control, plant operations

Navigation: User Guide ➔ View ➔ Plant Model ➔ Flowsheets This tab page displays a list of graphics pages associated with the project and allows the user

and Steam Properties Related Links: Species Table, Standard Species Model, Plant Model - Species Property Overrides, Fast IF97 Sat Properties As H2O (water

Window. The tab pages will change depending on if this is a Steady State (ProBal) or Dynamic project. For Steady State Projects, the following Tabs are available:

Audit Options displayed at the top of each Audit page as well as on the Audit Tab Page of the Plant Model. If this is not required then this can be switched

would be the model tag for the first tab page, and the sub-model (eq Qo) for subsequent pages. See Copy Access Window Tab name for more information. In

option is ticked on the Views Tab of the Plant Model, then the basis can be selected for each individual column on the Sp page. If the BasisPerColumn option

Navigation: User Guide ➔ View ➔ Plant Model ➔ Project Networks This tab page on the Plant Model Access Window shows information on the independent flow

five Tab pages: Modes Tab - Default mode selection for the project. See below for details. Graphics & Tags Tab - Tag naming convention. Archive Tab - Archive

global pages such as Plant Model or Solver Settings. Information displayed in the Access Window is different for each unit type or global page, and may

Equilibrium (VLE). The VLE sub-model is always enabled and would usually be the last sub-model evaluated. Other sub-models allowed as part of the Evaluation

Qi/Qo/QFeed/etc. tab page. These calculations will also appear on the content tab page in dynamic units with surge. If the Create new Tab for User Property

Separator sub-model. In addition, a number of sub-models are available which makes this model very flexible so that it can be used to model many types of

balance. See Model Examples for enthalpy calculation Examples. If the FEM_Reaction option on the first page is NOT enabled then the following tab pages are NOT

the following tables. The default Model Procedure access window consists of one tab page (MP) as part of the unit model it is associated with (e.g. Tank

Graphics pages into Areas. view all the unit models in the project. This can be by Graphics or by other lists such as by UnitTypes. find model The Explorer

from "Plant Model - Views tab page" or by pressing the "Include Properties" button on the pipe Qo tab and select "Transport" Molloy-Donaldson Model Dewey

the display and may result in some extra fields or tab pages. The default 'Standard' species model will be described here.

Warning! Page you're reading is outdated or was archived and very likely is referring to older version of the software. Navigation: User Guide ➔ SysCAD

Hyperlinks to external documents. MP tab - Optional tab, only visible if Procedures have been enabled on the Info tab page. Links tab, contains a summary table for

Heats of Combustion) option to "Included Properties" list on Qo pages & Plant Model - Views tab. Tags have been updated and new parameter for heating values

Standard Deviation For all methods, the tag PlantModel.RandomSeedAtStart (set on the Plant Model - FlwSolve page) affects the repeatability of the random

the Plant Model - Qualities Tab. LockUp, Material Tracking - phase/species selections and options must be made in the Plant Model - Qualities Tab. Once

user adds a reaction block to a unit, SysCAD creates the RB tab. This tab contains a summary of the reaction conditions. RS - Displays the reactions in

Optional tab, only visible if the EnvironHX is enabled. Evap - Optional tab that is visible if Evaporator is enabled. MU - Optional tab, or multiple tabs if

Hyperlinks to external documents. MP tab - Optional tab, only visible if Procedures have been enabled on the Info tab page. Links tab, contains a summary table for

QConcentrate - Available from Build 139. Optional tab, visible if ShowQConcentrate is enabled. This and subsequent tab pages, e.g. QConcentrate.. and Sp, shows the

Hyperlinks to external documents. MP tab - Optional tab, only visible if Procedures have been enabled on the Info tab page. Links tab - contains a summary table

would be the model tag for the first tab page, and the sub-model (eq Qo) for subsequent pages. This is useful when entering tags for Composition Fetch:

Block sub-models are evaluated. QCake - Available from Build 139. Optional tab, visible if ShowQCake is enabled. This and subsequent tab pages, e.g. QCake

QCake - Available from Build 139. Optional tab, visible if ShowQCake is enabled. This and subsequent tab pages, e.g. QCake.. and Sp, shows the properties

sections: SolventExtraction tab - Contains general information relating to the unit. ITX tab - Optional tab ,or multiple tabs if more than 1 Isotherm is

Block sub-models are evaluated. QProd - Available from Build 139. Optional tab, visible if ShowQProd is enabled. This and subsequent tab pages, e.g. QProd

option is ticked on the Views Tab of the Plant Model, then the basis can be selected for each individual column on the Sp page. If the BasisPerColumn option

This and subsequent tab pages, e.g. QFeed.. and Sp, shows the properties of the combined feed stream. The tags in the QFeed tab are valid even when the

configuration. SignalCon tab - Contains a summary of all of the individual Waveform Controls contained in the unit. SW Tabs tab - This page contains all of the

This and subsequent tab pages, e.g. QFeed.. and Sp, shows the properties of the combined Feed stream. The tags in the QFeed tab are valid even when the

Class Instances: Species Database Class, Particle Size Definition Class, Plant Model Class Predefined Classes: Array Class, StrArray Class, Matrix Class, TagSelect

graphics flowsheet pages are listed in Plant Model - Flowsheets page. New and improved options for Activating and Deactivating graphics pages. NOTE: This may

(For full documentation, please see Plant Model - Flowsheets tab) If you have used the functionality on this tab to activate or deactivate flowsheets

sections: FilterPress tab - Contains general information relating to the unit. WashCalc tab - Available from Build 139.30498. Optional second tab which allows the

QCake - Available from Build 139. Optional tab, visible if ShowQCake is enabled. This and subsequent tab pages, e.g. QCake.. and Sp, shows the properties

Optional tab, only visible if the EnvironHX is enabled. Evap - Optional tab that is visible if Evaporator is enabled. MU - Optional tab, or multiple tabs if

Washer tab - Contains general information relating to the unit. RB - Optional tab, only visible if the Reactions are enabled. EHX - Optional tab, only visible

Mass and Energy balance. See Model Examples for enthalpy calculation Examples. Unit Type: Evaporator - The first tab page in the access window will have

the unit. PC - Optional tab that is visible if EB.Solubility.On is enabled on the first tab. MU - Optional tab, or multiple tabs if more than 1 Makeup is

configuration. SlewCon tab - Contains a summary of all of the individual Slew Rate Controllers contained in the unit. S Tabs tab - This page contains all of the

Configuration To Enable the Model Procedure Right click on Thickener (Modelled as Tie-1 process unit), On the Info Tab, select Procedures MP tab will be created,

or use the Tag List to set before initialisation section in the Plant Model - Project Tab. Using a General Controller, inside an InitialiseSolution() subroutine

the Project - Added new species used and species unused lists to Plant Model - Species tab. This will provide the user with a list of species that are unused

Alumina 3 Bayer Species Model Unit Type: Precipitator3 - The first tab page in the access window will have this name. Only visible when Precip.Method =

enabled on the first tab. RB - Optional tab, only visible if the Reactions are enabled in the Evaluation Block. EHX - Optional tab, only visible if the

the TCE tab page. RxnBypass - Optional tab, only visible if the WithBypass option is enabled on the TCE tab page. PHREEQCResults tab - This tab displays

sure Plant Model - Species tab - Species Property Overrides - Vapours is set to IF97_2 for H2O(g).Rho and H2O(g).Cp. Please solve and retune models. For

the unit. PC - Optional tab that is visible if EB.Solubility.On is enabled on the first tab. MU - Optional tab, or multiple tabs if more than 1 Makeup is

General Models ➔ Area Model This page is for Build 138. The Area Model was removed in Build 139. The area model allows groups of models (tanks, feeders, pipes

of the models. Rearranged top two rows of buttons and options of the Access window. Plant Model Improved arrangement and options in Plant Model access

been added to Plant Model - Environment. These variables are accessible from PGM Plant Model Class. Control models that have multiple models with a Summary

option is enabled on the TCE tab page. OLIResults tab - This tab displays the key results of the calculations. Input tab - This tab displays a summary of the

is enabled on the TCE tab page. PHREEQCResults tab - This tab displays the key results of the calculations. Input tab - This tab displays a summary of

Crusher Model Selection/Breakage Models Test Data The specific model is selected with the Method drop down list on the Crusher2 or Crusher tab. If you

TCE Feeder unit model. Various new PGM functions and improvements. 13 Apr 2022 Discussion Page: Annual Climate Data for Dynamic Modelling 05 Apr 2022 Build

on user configuration. BaroCond tab - This first tab contains general information relating to the unit. RB - Optional tab, only visible if the Reactions

Flash Tank model. On the PHREEQCFlashTank tab page, configure the model - methods, pressures, etc. On the TCE tab page, select the correct ChemModel (to match

Histogram model. This model can calculate and display statistical information about one variable. Implemented new Bivariate Statistics model. This model can

defined in menu command View - Plant Model - Flowsheets Tab. This dialog box replaces the Solver Setup - Active Pages Tab. When using the Display action

the TCE tab page. RxnBypass - Optional tab, only visible if the WithBypass option is enabled on the TCE tab page. PHREEQCResults tab - This tab displays

the Events model. The Scheduled Events unit operation can be used to simulate periodic events in a plant model, such as Batch Addition, Reagent dosing, Batch