Material Flow Section - Energy

From SysCAD Documentation
Jump to navigation Jump to search

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Energy, Values at User T and P

Material Flow (Qo) Qxxxx Tab Include Properties Species Flow Optional Tabs
Basic Information Energy
ValuesAtUserTandP
Density Correction
Solubility
Saturation
Acidity
Charge
Transport
HeatsOfCombustion
Heating Values
Solution Impurity
H2O Properties
Water Quality Sp Tab
EC Tab
DLockup
LockUp
DTrack
Track
DSz
Sz
MSz
DSSA
SSA

Related Links: Common Content Section


Introduction

These properties are related to the energy contained in the stream, e.g. specific heat, enthalpy, etc. These will only be shown if the user has chosen to display the Energy (Thermodynamic) Properties on the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material flow section.

Tag (Long/Short) Input / Calc Description/Calculated Variables / Options

Energy

These properties will only be shown if the user has chosen to display the Energy (Thermodynamic) Properties on the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material Flow section.

Specific Heat
[email protected] Calc Cp of the total mixture in the stream @ 0 °C.
Cp / [email protected] Calc Cp of the total mixture in the stream @ temperature.
[email protected] Calc Solids Cp at the stream temperature
[email protected] Calc Liquid Cp at the stream temperature
VmsCp[email protected] Calc Vapour Cp at the stream temperature
[email protected] Calc Slurry Cp at the stream temperature
CpCv Calc The ratio of specific heat at constant pressure to specific heat at constant volume at the stream temperature.
Enthalpy - Sensible
[email protected] Calc The change in enthalpy, dH, (excluding phase change) from 0°C to stream temperature for the total mixture.
[email protected] Calc The change in enthalpy, dH, (excluding phase change) from 0°C to stream temperature for the solids.
[email protected] Calc The change in enthalpy, dH, (excluding phase change) from 0°C to stream temperature for the Liquids.
[email protected] Calc The change in enthalpy, dH, (excluding phase change) from 0°C to stream temperature for the vapours, or gases.
[email protected] Calc The change in enthalpy, dH, (excluding phase change) from 0°C to stream temperature for the combined solids and liquids.
totHs Calc The total Hs at stream temperature ([email protected] x mass flowrate).
Enthalpy - including Phase Change (Please see What is the difference between Hs and Hz?
[email protected] Calc The change in enthalpy, dH,(including phase change) from 0°C to stream temperature for the total mixture.
totHz Calc The total Hz at stream temperature ([email protected] x mass flowrate).
Total Enthalpy (previously called Enthalpy of Formation) Total Enthalpy = Heat of Formation at 25 + [math]\displaystyle{ \int\limits_{25}^{T}Cp dT\, }[/math]
[email protected] Calc Total Enthalpy for the mixture at 0°C and 101.325 kPa, per mass.
[email protected] Calc Total Enthalpy for the mixture at the stream temperature and pressure, per mass.
[email protected] Calc Total Enthalpy @ 0°C and 101.325 kPa x mass flowrate
[email protected] Calc Total Enthalpy @ stream temperature and pressure x mass flowrate
Entropy and Free Energy
[email protected] Calc Entropy for the total mixture at 0°C and 101.325 kPa.
[email protected] Calc Entropy for the total mixture at the stream temperature and pressure.
[email protected] Calc Gibbs Free Energy (mass basis) for the total mixture at 0°C and 101.325 kPa. This is only visible in Build 138 and later.
[email protected] Calc Gibbs Free Energy (mass basis) for the total mixture at the stream temperature and pressure. This is only visible in Build 138 and later.
[email protected] Calc Gibbs Free Energy (mole basis) for the total mixture at the stream temperature and pressure. This is only visible in Build 138 and later.

Values at User Defined T and P

If the ValuesAtUserTandP option is selected in the Plant Model - Species tab page or from the Include Properties dropdown list on the first page of the material Flow section, then the following fields will also be shown:

UsrDefT Input User defined Temperature
UsrDefP Input User defined pressure. This will be the saturation pressure at the user defined temperature if * is entered for this field.
[email protected] / [email protected] Calc Volume flow of the total mixture at user defined temperature and pressure.
[email protected] / [email protected] Calc Volume flow of the liquid phase at user defined temperature and pressure.
[email protected] / [email protected] Calc Density of the total mixture at user defined temperature and pressure.
[email protected] / [email protected] Calc Density of the liquid phase at user defined temperature and pressure.
[email protected] / [email protected] Calc Density of the vapour phase at user defined temperature and pressure.
[email protected] Calc The solids concentration at user defined temperature and pressure.
[email protected] Calc Heat capacity of the total mixture at user defined temperature and pressure.
[email protected] Calc Enthalpy of the total mixture at user defined temperature and pressure.
[email protected] Calc Enthalpy including phase change of the total mixture at user defined temperature and pressure.
[email protected] Calc Total Enthalpy including heat of formation of the total mixture at user defined temperature and pressure.