Search results

Started | Requesting a License License Options | Crypkey Software Licensing | Software License USB License Key | Network License Training Info | Training

with a standard license. The following Control models are also used for process control purposes and are available with a standard license. All statistical

restricted by license agreement. If the project is to be shared with third parties, please ensure all parties involved have the correct license to access all

Build 139.35250 The main SysCAD menus are shown in the following tables (License Group and commands marked [math]\displaystyle{ ^\Delta }[/math] are only

Environment Conditions; System Tab - Allows access some SysCAD Version, SysCAD License and Project information. Useful for reporting. ModelList Tab - Available

projects require a valid SysCAD license (can be trial license). Steady-state example projects require a steady-state (ProBal) license while dynamic projects require

HeatBalance Addon to load. If user does not have the "HeatBalance" add-on license option, then the project will fail to load. AddOnsUsedList Output Some SysCAD

Version:8.0 NGN Build:8058 Current License:Not Licensed License Info:Demo Mode License Location: C:\SysCAD139\License\ Date:10-Mar-2021 Site Code : XXXX

software license, mainly used for license lease, training license or trial license. Network License - this is a shared multi-user NETWORK license, there

Build:8058 Current License:ProBal and Dynamic OK License Info:Stand Alone License - xxxxxxx License Location: Lists the SysCAD license location, as per the

results of the test are shown in the Message Window. License Information Lists the current license information, which include information such as the expiry

xxxx.ini SysCAD License Files (Licensing) SysCADxxx\License\README.TXT SysCADxxx\License\CKS.exe (Used by SetupEx.exe) SysCADxxx\License\SetupEx.exe (The

the client side license folder. Does it find the network license? In SysCAD application, set license location to the client side license folder on the PC

2022, a TCE add-on is required instead of a separate individual ChemApp License add-on. ChemApp compatible databases of interest are also required. ChemApp

laptops. A USB License Key is issued for the purchase of each stand-alone license – the USB License Key "is the SysCAD license". USB License Keys can be updated

based STAND-ALONE software license, mainly used for license lease, training license or trial license. The SysCAD License can be located in any folder on the

Navigation: User Guide ➔ Menu Commands ➔ License Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

Project Edit View Species Tools Actions Graphics Trend/Control TagList License Window Help

installed on the machine. An OLI runtime license is needed to install the OLI engine. Once installed, the license can be out of date, but it must be present

NEW from August 2022: ALL TCE Options are now included under a single TCE license add-on without the requirement to purchase separate SysCAD add-ons for OLI

Edition" License is NOT required to use OLI in SysCAD. "OLI Studio" or "OLI Studio: Stream Analyzer" does not include an "OLI Engine Runtime" license, this

ChemApp License is required from GTT-Technologies. This is used for including AQSol thermodynamic calculations in SysCAD. An appropriate AQSol License is required

error. Check the license location. After changing the license location, exit SysCAD and restart SysCAD. Try check the license using the License Utility (syscad

displaying the installation folder of SysCAD. License folder Windows Explorer will be opened displaying the license folder used by SysCAD. Basefiles folder Windows

stand-alone software license, the License Location is the folder used to store the license. For a network software license, a license folder on the server

stand-alone license – the USB License Key "is the SysCAD license". USB License Keys can be updated remotely with the purchase of additional license options

using this configuration file. Note: The user must have the Energy Balance license add-on for heat calculations to be performed in a project. For users wanting

is a separate license to your commercial license: see Checking License Location and Instructions for obtaining a SysCAD Training license. After SysCAD

Key for a trial SysCAD license and email this back to the user. Once the user has received the Site Key enter this in the License Authorisation dialog and

should be taken to transfer the license: Start SysCAD on Computer A (Unlicensed), select from menu, License | Register License Transfer, type in a path for

If you are using a network license, the "SysCAD License Server" will need to have been configured. See Network Software License. If you do not have Microsoft

August 2022, a TCE add-on is required instead of a separate individual AQSol License add-on. AQSol must be installed on the computer for the option to work.

balance. This applies to steady state or dynamic simulation modes. The SysCAD License determines which are available to the user. All modes share the same flowsheet

feedback during license initialisation. Block multiple copies of SysCAD initialising license at the same time. Expand display in License Information to

General Options: Brings up the General Options Dialog box. License Information: Shows the current license information. Cascade Windows: Cascades all opened SysCAD

Project Edit View Species Tools Actions Graphics Trend/Control TagList License Window Help

Stand-alone Software License or Network License. The license utility allows license management without full installation of SysCAD. The license utility is often

enhancement for productivity. An accessible USB port for USB License Key when using a stand-alone license. SysCAD makes use of Excel for reporting. It is recommended

reissuing of a network license that has already been setup. If the network license has not been setup please refer to Setting Up Network License. There are two

Size distribution set up requires the following: Size Distribution add on license option; and During Model selection (step 1 of Edit Configuration), select

SysCAD and Utility Programs Checking License Location Instructions for obtaining a SysCAD Training software license

Setting & License Options" In Build138 and earlier, projects with “Heat Calculations” switched on are allowed to load and run even if the SysCAD license that

steady-state and dynamic licenses, perform step 2 with the steady-state license and the remaining steps with the dynamic license. When opening an existing

finder for dynamic solver Significant list of bug fixes and improvements TCE license options are now combined as a single TCE add-on. 18 Oct 2022 Honoured to

Navigation: User Guide ➔ Licensing ➔ Software Licenses Expiry Dates Related Links: SysCAD Version History When using a software license, each Build has a built-in

stand-alone license – the USB License Key "is the SysCAD license". USB License Keys can be updated remotely with the purchase of additional license options

SysCAD 9.1 license can not be transferred to a SysCAD 9.2 license folder. A SysCAD 9.2 license can not be transferred to a SysCAD 9.1 license folder. Create

on every run. These options are designed for users of SMDK and Developer License where extra tests are performed on stream mixtures to test data sanity (e

instructions to create this file. NB The user MUST have a valid OLI Engine license to make use of the OLI functionality in SysCAD. Please see http://www.olisystems

OLI and PHREEQC. In the example screenshot above, PHREEQC is used. TCE License Option User can specify whether the licensed or demonstration version of