Search results

Navigation: Models ➔ Common Sections ➔ Info This section is common to all model types. This section is common to all model types.

between two Feeder-Cross Page Connector units operating as cross-page connection. Access to Flanges can be found on the Links tab (Detailed view) of any

JuiceScreen - The first tab page in the access window will have this name. Configuration and connection inputs and results are displayed on this page. The second

MudFilter - The first tab page in the access window will have this name. Configuration and connection inputs and results are displayed on this page. The second

FFEvaporator1 tab - Contains general information relating to the unit. HX tab - This second tab contains the Heat Exchange information. Info tab - Contains

Type: SugarCrusher - The first tab page in the access window will have this name. User inputs and results are displayed on this page. Add to Configuration

Parms tab - This tab lists the results for OLI parameters. This tab is not visible if CalculateProperties is set to Minimal. Scale tab - Optional tab, only

solution. Parms tab - This tab lists the results for OLI parameters. Scale tab - This tab lists the scaling tendencies of the OLI solids. Info tab - contains

second tab page in the access window. Input Parameters, results and calculated data are displayed on this page. Class: Data - The second tab page in the

VacuumPan - The first tab page in the access window will have this name. Configuration and connection inputs and results are displayed on this page. The second

for configuring the model is: On the OLIChemModel tab page, browse for required .dbs file. On the OLIChemModel tab page, press the Init and Load button

drier may be displayed on this page. The data display is turned on or off in the first tab (see display segment data above). The data is displayed in a matrix

FFEvaporator2 tab contains general information relating to the unit. Results - This second tab contains unit results for the shell and tube side. VLE tab - Contains

second tab page in the access window. Input Parameters, results and calculated data are displayed on this page. Class: Data - The second tab page in the

tick box ShowSegementData is selected a tab named Data appears and displays a matrix of results for segments through the process. Data is displayed sequentially

FFEvap3 tab contains general information relating to the unit. Results - This second tab contains unit results for the shell and tube side. VLE tab - Contains

detail in the following tables. The first tab contains general information relating to the unit. The second "ASSY" tab contains the settings for controlling

all columns on the Sp page. The Basis and Display options for the Elements section of the EC page and the Components section of the EC page can only be

by the user and must be checked to ensure data used are correct. For help on the entering and modifying data in the SysCAD.93.db3 file, please see Species

Views tab page or from the Include Properties dropdown list on the first page of the material Flow section. The values will appear on a new tab page called

SysCAD.93.db3 file. The database is created using existing SysCAD data, PHREEQC Model data is not transferred to the SysCAD database. Once a SysCAD.93.db3

error conditions on the TCEModelCfg (1st tab), as shown in the AQSol example below . To fix the error, go to the TCEConfig tab (2nd tab) and press . This

sub-models are solved using the drop down lists on the first tab page - Off, On-AutoSequence, On-Sequence1, On-Sequence2, etc. The AutoSequence option will

displayed on a new tab page in the Access window, with the page name matching the class instance name. The user does not need to specify PageLabel(xxx)

to "default data tabs" (e.g. D1 for data, M1 or matrix and so on) or user defined tabs (if pagelabel is used within the PGM file). Info tab - Contains general

Navigation: Models ➔ Common Sections ➔ Define Species (DSp) Section This Tab will contain a list of all of the species that are specified in the Project

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Acidity (pH), Charge, Transport Related Links: Common Content Section This section is used

conversion units for the individual data field, at any time. Please see Conversions. When entering data into SysCAD data fields, the default mode is Override

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Density Correction, Solubility, Saturation Related Links: Common Content Section This section

Navigation: Models ➔ Common Sections ➔ Material Flow Section ➔ Solution Impurities, H2O Properties Related Links: Common Content Section This section is

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Acidity (pH), Charge, Transport Related Links: Common Content Section This section is

has chosen to display the Energy (Thermodynamic) Properties on the Plant Model - Views tab page.

User data, and just use the Hardwired data. To edit the user properties, either: Click on the 'Edit User Data' line in the list of available data; OR Double

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Solution Impurities, H2O Properties Related Links: Common Content Section This section

Cyclone tab - This page contains all of the fields relating to the Hydrocyclone method. PartCrv tab - This tab displays the partition curve data for the

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Density Correction, Solubility, Saturation Related Links: Common Content Section This

project that uses the database, and clicks on the button in an Access window of a pipe or on the Content page, then the Species Short Name with individual

- The first tab page in the access window will have this name. This page is only visible if the HXSizeCalc option is ticked on the first tab page. Add to

FeederSink - The first tab page in the access window will have this name. The Data section of the cross page connector changes depending on the Operation

(Plant Model - Flowsheets tab page), then create the first Area if none and force any new graphics pages to belong to first Area. Added option to include

database and replace it with the default SysCAD data. You may choose to overwrite the default data with your own data after the upgrade step. ALL SysCAD 9.2 databases

sub-models are solved using the drop down lists on the first tab page - Off, On-AutoSequence, On-Sequence1, On-Sequence2, etc. The AutoSequence option will

the syntax is as follows: 1. If the required variable is on the first tab page (or any page with same name) of the access window and not indented below

The first tab page in the access window will have this name. This tab page is only shown if "Method=Condensing" and "Layout = Tube Detail". This tab page

FEM_Reaction option on the first page is NOT enabled then the following tab pages are NOT shown: FEM, Solver, Analysis, Results, VCS Data and QFEM. Unit Type:

Calculation Configuration. LPC Tab (Leg Evaluation Block Solubility On) Select the Potash solubility System. NOTE the Potash Solubility data requires the Potash Addon

Optional tab, only visible if the TotalStore.Calculate option is enabled on the first tab page. The combined total of all stores. This series of tabs also

Examples. Unit Type: Evaporator - The first tab page in the access window will have this name. HX - Optional tab, only visible if an Internal Heat Exchanger

input the data points directly into the Spline Table data without the need to first fit it to a curve. Repeat the above for Ca[OH]2(aq) Once the data has been

calculation Examples. Unit Type: FFEvaporator4 - The first tab page in the access window will have this name. The page contains the results fields. Add to Configuration

statement as well as the table data. There are many examples of the tag select reports, these are documented on a separate page, please see Excel Tag Select

be updated. One common example is XXX.Prod.HeatFlow is now XXX.HeatFlow (was shown on the Output tab page, now shown on the Results page). Once the projects

unit. Each of the outputs has a common period (one year) so we can select the CommonPeriod option on the first tab. Data for each of the signals is then

LPrandtlNo). In a Dynamic Tank, the "SpeciesFilter" Filter.Method (on the Connect tab page) does not upgrade, as the possible selections with this option have

Historian files - Histxxxx.xxx. Used to store data when historian is switched on. Various Project ini files Controls.Data (This was called Other.dat in Build 138

PotashEvaporator - The first tab contains general information that can be set by the user. Results - This tab contains the unit results. HX - Optional tab, only visible

red in the above picture. If the user disables the unit, by un-ticking the On tick box, then the following actions occur: All streams connected to the 'Shell'

Model, under the section "SSA" located on the Content or Qi tab page respectively; the user MUST tick the SetData box and enter the appropriate values,

ShowQRxnBypass is enabled on the TCE tab page. QFeed - Optional tab, only visible if ShowQFeed is enabled on the first tab page. This page shows the properties

ShowQRxnBypass is enabled on the TCE tab page. QFeed - Optional tab, only visible if ShowQFeed is enabled on the first tab page. This page shows the properties

is enabled on the TCE tab page. QBypass - Optional tab, only visible if ShowQBypass is enabled on the TCE tab page. QRxnBypass - Optional tab, only visible

equipment memo field on Info tab page of all models, which is ideal for longer descriptions in models. New link fields on Info tab page of all models, which

available. SatIdx of 100 for H2O(s) has been entered in the "PHREEQCConfig" tab. Salts First algorithm has been selected for species re-building in both Minteq_v4

liquids data on the various layers in the heap. VLayers tab - Optional tab, only visible if the WithVapours option is enabled. Contains vapour data on the

choice between: Data input as instantaneous Data Points or as interval Average Data Linear or Spline fitting between data points Data points at interval

variable for added functionality. Some of the common keywords are summarised in the table below, Common Options for Variable declaration. A list of all

display field on Audit page for Heat of Dilution contribution (for each species with HOD data) for change in dilution based on the common flow (i.e. minimum

processing or generating Excel Reports. If the Clear messages on run option is ticked on the Options tab of the Message Window, then even with this option ticked

new display field on Audit page for Heat of Dilution contribution (for each species with HOD data) for change in dilution for the common flow between inlets

For reference, you can see a SysCAD summary of common elements on the right. In this discussion page we will look at why this is so, how we can use this

Examples for enthalpy calculation Examples. Unit Type: Manifold - The first tab page in the access window will have this name. Add to Configuration File