Solver Setting - TearTags
Jump to navigation
Jump to search
Navigation: User Guide ➔ Menu Commands ➔ View ➔ Solver Settings ➔ TearTags
| SS Only | Dynamic Mode Only | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FS_Solver | ProBal | Dynamic | Method | Scenario | Spills | Vents | SS Monitor | SS Finder | Convergence | GlobalTear | Tears | TearTags | Tolerances | Analysis | Changes |
Related Links: Tear, Convergence Methods, Tolerance Testing
Tear Tags
The Tear Tag tables lists the relevant tag for all the tear blocks in the project.
| Tags... | |||
| Flash Train Tears Tags (Only visible in Steady State (ProBal) projects) | |||
| Number | TearTag | SrcTag | DstTag |
| Flash Train Tear Number | The tag (name) of the Flash Train Tear Block. | The tag of the source unit. | The tag of the destination unit. |
| Pipe Recycle Tears Tags | |||
| Number | TearTag | SrcTag | DstTag |
| Pipe Recycle Tear Number | The tag (name) of the Pipe Recycle Tear Block. | The tag of the source unit. | The tag of the destination unit. |
Dynamic Parameters
The parameters below are only shown in Dynamic projects.
| Counts... | |||||||||
| Pipe Recycle Tears Counters and Statistics | |||||||||
| No | TearTag | Steps Good |
Steps Bad |
Reqd Step |
Iters Total |
Worst ID |
Step Iters |
Stiffest Variable Worst in Step |
Stiffest Variable Worst in Solution |
|---|---|---|---|---|---|---|---|---|---|
| Pipe Recycle Tear Number | Name of the Pipe Recycle Tear Block | The number of good steps (tear converged) in the current run. | The number of bad steps (tear NOT converged) in the current run. | The number of iterations required to converge the tear in the current step. | The total number of iterations performed in the current run. | The step where the most number of iterations was required. | The maximum number of iterations required in any step. | Worst variable in the tear in the current step. | Worst variable in the tear in the current run. |
The following table may be shown on the Tears tab if there are no tears in the project.
|
Tag (Long/Short) |
Input / Calc |
Description |
| Convergence Summary | ||
| Overall | ||
| Steps | Display | The number of steps performed in the current run. |
| Steps.Good | Display | The number of good steps (all tears converged) in the current run. |
| Steps.Bad | Display | The number of bad steps (not all tears converged) in the current run. |
| Iterations | Display | The total number of iterations performed in the current run (cumulative, maximum of Steps*MaxIterations). |
| Iterations.Reqd.Max | Display | The number of iterations required to reach convergence for the worst Tear in the solution. |
| Iterations.Reqd.MaxTag | Display | Tag of tear related to Iterations.Reqd.Max. |
| Current Bad Step | ||
| Steps.Bad.Maximum | Display | Current maximum number of consecutive bad steps in the current run. |
| Steps.Bad.MaxTag | Display | Tag of tear related to Steps.Bad.Maximum. |
| Iterations.Busy.Max | Display | Current maximum number of consecutive Not Converged iterations in the solution. |
| Iterations.Busy.MaxTag | Display | Tag of tear related to Iterations.Busy.Max. |
| Current Step | ||
| Step.Converged | Display | A value of 1 indicates that the project converged (solved) on the current step, while a value of 0 indicates that it did not converge/solve on the current step. |
| Step.Iterations | Display | The number of iterations executed within the current step. |
| Step.Tears.Good | Display | The number of tears converged within the current step. |
| Step.Tears.Bad | Display | The number of tears NOT converged within the current step. |
| Step.Worst.Tear | Display | Tag of the worst Tear in the solution. |
| Step.Worst.Busy.Iters | Display | Number of iterations not converged for the worst tear (Step.Worst.Tear). |