Met Dynamics - Mill
Navigation: Models ➔ Met Dynamics Models ➔ Met Dynamics - Mill
Latest SysCAD Version: 25 October 2024 - SysCAD 9.3 Build 139.36522
Related Links:
Available from Build 139.35544.
General Description
This model implements fixed or predictive comminution for different types of mills. The model can handle multiple ore streams with common or different parameters. The user can select one of the following methods:
- User defined fixed discharge partition curve
- Leung autogenous (AG) and semi-autogenous (SAG) mill model
- Lynch rod mill model
- Napier-Munn perfect mixing ball mill model
- Napier-Munn perfect mixing vertical stirred mill model
- Herbst-Fuerstenau grinding model
Requires Met Dynamics Add-On and license from Met Dynamics.
Diagram
The diagram shows the default drawing of the Mill, with all of the streams that are available to be connected to the unit.
The physical location of the streams connecting to the Mill is unimportant. The user may connect the streams to any position on the unit.
Inputs and Outputs
| Label | Required Optional |
Input Output |
Number of Connections | Description | |
| Min | Max | ||||
| Feed | Required | In | 1 | 10 | The slurry feed/s to the unit |
| Recycle Feed | Optional | In | 0 | 1 | Optional recycle feed to the unit |
| Product | Required | Out | 1 | 1 | The product from the unit |
Model Theory and Data Sections
Please refer to following Met Dynamics wiki pages for further information:
- AG/SAG (Variable Rates)
- Rod (Lynch)
- Ball (Perfect Mixing) for steady-state
- Ball Mill (Perfect Mixing, Dynamic) for dynamic
- Stirred (Perfect Mixing) for steady-state
- Stirred (Perfect Mixing, Dynamic) for dynamic
- Mill (Herbst-Fuerstenau)
Adding this Model to a Project
Add to Configuration File
Sort either by DLL or Group:
| DLL: | MetDynamics.dll |
→ | Units/Links | → | Met Dynamics: Mill | |
| or | Group: | Size Distribution |
→ | Units/Links | → | Met Dynamics: Mill |
See Model Selection for more information on adding models to the configuration file.
Insert into Project Flowsheet
| Insert Unit | → | Met Dynamics | → | Mill |
See Insert Unit for general information on inserting units.