Met Dynamics - Magnetic Separator

Navigation: Models ➔ Met Dynamics Models ➔ Met Dynamics - Magnetic Separator

Met Dynamics Overview	Met Dynamics Classifier	Met Dynamics Crusher	Met Dynamics Dense Medium Separator	Met Dynamics Flotation	Met Dynamics Gravity Concentrator	Met Dynamics HPGR	Met Dynamics Hydrocyclone	Met Dynamics Magnetic Separator	Met Dynamics Mill	Met Dynamics Pump	Met Dynamics Screen

Latest SysCAD Version: 25 October 2024 - SysCAD 9.3 Build 139.36522

Related Links:

---

Available from Build 139.36389.

General Description

The Magnetic Separator efficiently mixes all incoming feed streams and, based on user configuration, calculates the recovery of materials according to their magnetic properties.

The solid splits are determined using one of the following methods:

• User-Specified Recoveries: Users manually set the recovery rates based on their specific requirements.
• King and Schneider Model: Applicable for drum-type Wet Low Intensity Magnetic Separators (WLIMS).
• Dobby and Finch Model: Used for Wet High Intensity Magnetic Separators (WHIMS) and High Gradient Magnetic Separators (HGMS).

Requires Met Dynamics Add-On and license from Met Dynamics.

Diagram

The diagram shows the default drawing of the Magnetic Separator, with all of the streams that are required for operation of the unit.

The physical location of the streams connecting to the Magnetic Separator is unimportant. The user may connect the streams to any position on the unit.

Inputs and Outputs

Label	Required Optional	Input Output	Number of Connections		Description
			Min	Max
Feed	Required	In	1	10	The slurry feed/s to the unit
Magnetics	Required	Out	1	1	Magnetics outlet from the unit
Non-Magnetics	Required	Out	1	1	Non-Magnetics outlet from the unit

Model Theory and Data Sections

Please refer to following Met Dynamics wiki pages for further information:

• WLIMS (King and Schneider)
• WHIMS (Dobby and Finch)

Adding this Model to a Project

Add to Configuration File

Sort either by DLL or Group:

	DLL:	MetDynamics.dll	→	Units/Links	→	Met Dynamics: Magnetic Separator
or	Group:	Size Distribution	→	Units/Links	→	Met Dynamics: Magnetic Separator

See Model Selection for more information on adding models to the configuration file.

Insert into Project Flowsheet

Insert Unit

→

Met Dynamics

→

Magnetic Separator

See Insert Unit for general information on inserting units.