|Application Window||Message Window||Graphics Window||Access Window||Explorer Window||Trend Window||TagList Window||Project Window|
Latest SysCAD Version: 17 January 2023 - SysCAD 9.3 Build 139.32335
The Trend Window is for results view / tracking. It is an optional document. Deleting a trend window will not affect SysCAD project results.
A Trend Window is an extremely useful tool as it allows the user to:
- Have the Key Performance Indicators for a project visible in one window;
- Keep track of different variables from any flow sheet in a project;
- Graphically trend selected variables;
- In a Steady State project the values in the Trend window will be displayed as a function of number of iterations. Therefore the user may view how variables across the project change as the solution moves towards convergence.
- In a Dynamic project the values in the Trend window change as a function of time. Therefore the user may view historical data for tags, for example how the level of a tank changes as a function of time.
- Trend variables from the SysCAD PID controllers using the Control Window (or Trend Window With Controller option for Build137 and earlier). This is an extension to the normal trend window and is described in Controls Window.
When a user starts a new project, SysCAD will automatically add a trend window. User may choose to add more trend windows to the project, please see Open a New Trend Window for information. The trend window is saved to a file in the project with a file extension trn. The user can navigate to the Trend windows using the Explorer Window.
For a description of menu commands and toolbar buttons for the trend window see Trend Commands. This describes commands for scrolling, zoom in out, various options, etc.
Video Links: The following video shows you how to add tags to the Trend Window and how to trend a tag:Trend Windows video
A Trend Window is split into two views. The top half displays the Trend Line View. The bottom half contains a list of tags is termed the Trend List View. The sizes of the two views may be adjusted by moving the splitter bar up and down (the horizontal grey bar between the views). An example of a Trend window is shown below:
- The vertical green line represents the most current time (dynamic project) or the most recent value (steady state project). Use to move to the end of time, ie, make sure the most recent value is being displayed on the trend window.
- Each variable can have a different range, the variable range will fit the full plot area.
- If the trend line is switched on, it will add the variable to the historian. However, if user manually turns the "Record in Historian" off, the trend lines are not remembered, if you scroll or zoom in the Trend Line View, the trend lines are lost.
- If the Historian is on, new values will be added to the historian file until it is full, then a new file will be created. SysCAD will only keep a specified number of historian files, the older files will be discarded to make room for new ones. As a result, user may only access the more recent values in the trend.
The mouse click options and Trend List View column headings are explained below. For information about the Trend Window commands, please see section SysCAD Commands - Trend Commands.
Open a New Trend Window
To open a new Trend window, use one of the following commands:
- If the 'Trend' menu is active (click on any Trend window), click on Trend - New Trend Window.
- Right click on 'Trends' in the Explorer Window (if this is not already open, click on View - Explorer) and select 'New Trend Window'.
- With a project open, use one of the following commands:
- Window - New Document
- Short Cut Key: Ctrl+N
- Select the 'Trend' option, and press 'OK'.
Each of these methods will open a new Trend Window 'Trend_xx.trn.'
- This command is only available if a SysCAD project is open.
- This command is not available if SysCAD is solving or running.
- In Build 136 or earlier, user can select this from the File Menu Command as well.
- In Build 139 and later, when the project is saved, the Trend windows will be saved to the \DocsTrend folder.
Trend Line View
This is the top view above the splitter bar. It is used to graphically display trends configured in the Trend List View. The user may view further information about the Trend lines as discussed below:
Display Changing Information along a Trend Line
Configure a Trend Line
To make changes to a Trend Line, or the Trend Line View, Right Click on a trend line and the following pop up list will be displayed:
- The first value is the Tag for the Trend line. If the user clicks on this tag the Access Window for this unit will be displayed.
- The next 3 fields allow the user to adjust the position of the selected trend line in the Trend Line View.
- If Auto On is selected the trend line is centred on the Trend Line View.
- Colours allows the user to change the colour of the selected Trend Line or the colour of the Trend Line View background or Grid lines.
Zoom into a Selected Area
The user may zoom in on a selected portion of the trend by double clicking on either side of the area of interest. The window will then zoom to the area between the two locations. The duration display on the Trend Window will become the time difference between the two points.
Trend List View
The bottom half of the Trend Window is the Trend List View. This is used to enter user selected Tags for viewing. Values are updated each iteration. If required, these values can be trended in the Trend Line View by turning the trend line option on. The various configuration options are described in the sections below:
Viewing a Tag
Tag: Adding a Tag
The recommended method to add a Tag to the Trend View List is by "Send to Trend" or by using "Copy and Paste". User may also type the tag name and engineering unit into the Tag column. Please note that the engineering conversion unit is case sensitive.
- For example:
- Right click on a graphics symbol in the Graphics Window to open the Access Window;
- Select a variable on the Access Window by right clicking to bring up the pop up menu, select "Send to Trend" to add it to the trend window.
- When using "Send To Trend", the variable will be added to the most recently accessed trend window, on the first available line under the selected row. Therefore if you want to add the variable to a specific line on a specific trend window, first open the desired Trend Window, highlight the cell where the trend variable should go, then go to the access window and select the variable to send to trend.
- Alternatively, select a variable on the Access Window by left click, press <Ctrl + T> to copy, switch back to the Trend List View, highlight an empty row and press <Ctrl + V> to paste.
- Multiple tags can be copied by click and drag or in Build 139 or later, hold shift and using arrow keys on the Access Window. To paste multiple tags, make sure at least an equivalent number of rows are highlighted on the trend window.
If the tag is valid, its current value and default ranges will be shown. If the tag entry is not found, a message will appear in the Message Window.
Meas: This displays the current value of the tag. The measured value is being constantly updated as changes occur regardless of the historian and trend line status. However, if the entry is in the edit mode, the measured value will not be updated.
- Hint: If the value can be changed by the user, indicated by a white box field, the user may change the value in the Trend Window.
Min: Represents the minimum value on the Trend Line View for that tag. If the value goes below the minimum, the trend line is drawn along the bottom of the Trend Line View.
Max: Represents the maximum value on the Trend Line View for that tag. If the value goes above the maximum, the trend line is drawn along the top of the Trend Line View.
Description: The tag description is placed here. This field is also used for Driver file tags.
Note: When information is copied from the trend window, the descriptions will not be copied. That is, the description is only available on the Trend List View for displaying purposes and is not associated with the model data.
Comport Icon: (eg: ) An indicator of a driver tag. Only available if drivers are used. (For more information, refer to SysCAD Marshal - Trending SysCAD Marshal Driver Tags.)
General Comment: If the Trend Window values or trend lines do not refresh for any reason, the following actions may resolve the problem:
- Click on the refresh button to reconnect and refresh all tags; or
- Click on the scroll to end button to force the Trend Line Window to request points from the historian and repaint.
When the Trend Window is refreshed, the Trend Window requests information from the historian. A small dialog box on the bottom left of the main window will appear and indicate the progress of the requests to the historian.
Column Width:Dragging the column separation bar with the mouse can change the column width. (Similar to column resize in other Windows operation programs.)
- A text description may be entered instead of a tag by placing a ' at the start of the field.
Enabling or Disabling a Trend Line
Change the Colour of a Trend Line
A single right click on the small square colour line box to the left of the tag name will display a dialog box that will allow the user to change the colour of the trend line.
Configure Tags and/or the Trend List View
A single right click anywhere along the tag entry row will display the following pop up menu (Note: The contents of the menu may vary according to row selected):
If the right mouse click is anywhere on the column-heading row, the following pop up menu is displayed. All the options available here are global options.
All options above are explained earlier with the exception of Trend Indicator.
- The Trend Indicator function will allow the user to locate a trended variable easily on the Trend Line View.
- To do so, the user selects the Trend Indicator option, then rest the mouse cursor on a selected trended tag on the Trend List View, the trend line in the Trend Line View will blink to indicate its location.
- The user may first need to fit all the trends to ensure they are all visible.
- Some options such as the Trend Indicator are permanent options, they are not selectable.
Trend List Reference Tag Status Colour
Please see Access Field Reference Tag Status Colour.
Trend dialog boxes
A number of dialog boxes related to trends can be shown.
General Options - Trend Window
Please see General Options Trends.
Query Dialog Box
This dialog box is available from a button on the Trend Options Dialog Box and the Trend | Query menu option. This allows you to enter a request to the historian. The results are stored in the specified file. By default a list of all the trended tags (where the trend lines are switched on) for the current Trend Window is shown. The default list would generate a file representing the current Trend Line View.
Only tags that are recorded by the historian will be reported by the query.
Tags may be added and removed at will. A conversion unit may follow each tag.
Note that the query will only accept tags that are currently being recorded by the historian. A number of options may be chosen to configure the report layout. The resulting report is in a comma-delimited file and may be imported into a spreadsheet package to draw graphs.
Trending Run Speed and Processor Use
Add these tags to the Trend Window for dynamic projects to track run speed and processor usage:
- PlantModel.Stats.RunSpeed.Each (%)
- PlantModel.Stats.RunSpeed.Total (%)
- PlantModel.Stats.RunSpeed.Avg (%)
- PlantModel.Stats.ProcessorUse (%)
- PlantModel.Stats.ProcessorUseAvg (%)
Example Trend Usage for Steady State Projects
- Add Feed Rates to the Trend page to allow easy change without having to right click on all the separate feeders or controllers.
- Add key process variables to the trend page to observe the change as input variables change.
This is an example trend window for the Tutorial project. As demonstrated, the trend window can become the project summary table displaying input and results.