Search results

projects: Cooling Tower Project Evaporation Project Precipitation Projects using SSA Yield Method Precipitation Project using Full PSD

is modelled by a Tank with the EHX sub-model enabled to achieve the desired product temperature All Thickeners are modelled by the Thickener model using

option to Include All model - for improved usability when selecting unit models from model library dlls: For Edit Configuration - Model_Selection step, added

overview of the model, controls and SysCAD features. We'll also discuss potential improvements which could be made if adapting this model to a match a real-world

other PHREEQC unit models such as the PHREEQC Side Calc Model or PHREEQC Reactor referencing this PHREEQC Model Configuration unit model will use the mappings

for configuring the model is: Make sure the project contains at least one of the ChemApp Model Configuration model, and the model is loaded with the correct

Project User Value 1 (set in Plant Model) (equivalent to Q) Val(2) = reference to Project User Value 2 (set in Plant Model) (equivalent to K') C_Li = a previously

checked before the model can run. Model results will need to be reviewed and the model may need to be retuned. Fix for Precipitation3 new Agglom.UseMidSize

Shell and Tube Heat Exchanger 2 - Bug Fix for Shell and Tube 2 model with reaction sub-model in use, the LMTD calculations has been corrected to include heat

display of models used in a project that require a license AddOn. This information is on the PlantModel ModelList tab page. The Info page of each model now displays

Leach, Weak Acid Leach, Hot Acid Leach and Super Hot Acid Leach. Iron Precipitation to remove the iron Purification where various metals are separated Zinc

to rerun several hundred SysCAD models just to fine-tune our diagram.) As we vary the feed composition and run the model, we are interested in the brine

Configuration File Sort either by DLL or Group: See Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet

Bayer species model are calculated using the Standard species model, which uses the mass weighted mean of the liquor (see Standard Species Model). Refinery

connected, then the model acts just like the corresponding ChemApp Direct Calc model. Notes The user MUST have added and configured a ChemApp Model Configuration

Shows the use of ChemApp Model Configuration. Shows the use of ChemApp Direct Calc Model Shows the use of ChemApp Side Calc Model Shows the use of ChemApp

ChemApp Reactor using the Side Calc model option. The model has no links to any other models in SysCAD. Therefore, this model is not a part of any SysCAD network

exchangers. This model allows the user to embed these heat exchangers as part of the model. (This is often more efficient when carrying out the modelling calculations

the settings defined in the ChemApp Model Configuration unit model. The suggested workflow for configuring the model is: Make sure the project contains

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

Navigation: Models ➔ Alumina Models ➔ Bayer3 Species Model ➔ Bayer3 Species Model Theory Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

New Models and Add-Ons Model Improvements User Interface Improvements New TCE Add-Ons Improved Models for each TCE Add-On New TCE Models New Unit

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

connected, then the model acts just like the corresponding AQSol Direct Calc model. Notes The user MUST have added and configured a AQSol Model Configuration

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

connected, then the model acts just like the corresponding OLI Direct Calc model. Notes The user MUST have added and configured a OLI Model Configuration unit

New Models and Add-Ons Model Improvements Model and Species Improvements New TCE Add-Ons The following

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

switched off. Refer to Reverse Osmosis - Behaviour when Model is OFF for more details. Precipitation3 - Agglomeration terms for kernel, rate and collision

workflow for configuring the model is: Make sure the project contains at least one of the AQSol Model Configuration model, and the model is loaded with the correct

for configuring the model is: Make sure the project contains at least one of the PHREEQC Model Configuration model, and the model is loaded with the correct

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

this applies mainly to solid species). For example, in modelling Bayer liquors and precipitation, we have to account for organic species, which are generally

workflow for configuring the model is: Make sure the project contains at least one of the OLI Model Configuration model, and the model is loaded with the correct

Navigation: Models ➔ Evaporator ➔ Crystallizer There is no distinct 'Crystallizer' model within SysCAD, but the Evaporator model can be used to emulate