Search results

and would usually be the last sub-model evaluated. Other sub-models allowed as part of the Evaluation Block (EB) are Makeup Block (MU), Reaction Block (RB)

Navigation: Models ➔ Sub-Models ➔ Evaluation Blocks ➔ Phase Change (PC) Related Links: Evaluation Blocks, Solubility, Potash Solubility, Plant Model -

enter the data in 2 columns. SysCAD will interpolate the data using the TSpline method. The easiest way to enter the data is to copy the data from a spreadsheet

the project. This section is only available in Dynamic mode. This section mainly has read only variables, except for the first section, Model. Model determines

be enabled in the Evaluation Block (EB) in a unit. Therefore, the user must be careful to ensure that the order of evaluation in the EB will produce the

selected, then NONE of the EB sub models will be available Two groups of sub-models are allowed in a Dynamic Tank: Evaluation Block (EB) sub-models that act

disable Simplify and then the Evaluation Block (EB) will be visible. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled

several sections: Thickener1 tab - Contains general information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On and/or EB.PhaseChange@T

outlets. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

no BPE data in the species database, then the equilibrium point will be that of saturated steam, as found in Steam Tables. If there is BPE data in the

disable Simplify and then the Evaluation Block (EB) will be visible. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled

chosen. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

operate. Please see General Description or Notes in the Inputs and Outputs section for more information on washer connections based on mixing efficiency /

in SysCAD can be selectively enabled in individual units using the Evaluation Block (EB). Solubility Information in Pipes - The information shown in the

consists of three sections: DrumFilter tab - Contains general information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On is

information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled on the first tab. MU - Optional tab

unit. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. MU - Optional tab, or multiple tabs

environment. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

several sections, Classifier tab - Contains general information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On and/or EB.PhaseChange@T

sub-models in the Feed section, Underflow and Overflow sections. The following sub-models are available in each section: The Feed section, EB, allows the user

consists of several sections, CCWasher tab - Contains general information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On is enabled

unit PC - Optional tab, only visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

relating to the unit including Evaluation Block settings. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled on

general information relating to the unit. PC - Optional tab that is visible if EB.Solubility.On is enabled on the first tab. MU - Optional tab, or multiple

unit. PC - Optional tab, only visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

Reactions are enabled in the Evaluation Block. EHX - Optional tab, only visible if the EnvironHX is enabled in the Evaluation Block. Evap - Optional tab

solubility data from Perry (ref. 3) - therefore ignore any other species in solution and use data for 'pure' CaSO4; or Use solubility data from d'Ans (Ref

Absorbers, Kilns, Scrubbers, etc. Each stage in the model has an Evaluation Blocks (EB), and hence the user may enable Reactions (RB), Vapour-Liquid Equilibrium

Reaction Block is part of an Evaluation Block (EB) then the user may use the 'On-AutoSequence' option or change the evaluation sequence relative to other

e. if it is used in the function MP_Eval_BeforeEB(), then it may be stream feeding into the Evaluation Block; or An indeterminate value. Therefore, please

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

ShowBed are enabled on the first tab page. Contains data on the material in the bed. Content tab - contains data on the material in the pond. Preset tab - Optional

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

for edge case where tag is not selected in Model Data Transfer dialog when using context menu option "Data Transfer" from Access window tag. Size Distribution

ShowBed are enabled on the first tab page. Contains data on the material in the bed. Content tab - contains data on the material in the pond. Preset tab - Optional

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

consists of several sections: FlashTank2 tab. This section contains the variables that will be visible in dynamic mode. Cont tab. This section allows the user

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

calculations to generate a set of data. The data can be copied and pasted into external programs such as Excel to allow the data to be plotted and analysed.

unit. PC - Optional tab that is visible if EB.Solubility.On and/or EB[email protected] is enabled in the Evaluation Block. RB - Optional tab, only visible

option for Recirculation of Liquor. New data type Memo implemented. (See Data Types for more information) Alternate data type declarations available: Integer

Navigation: Models ➔ General Models ➔ Tank ➔ Dynamic Mode ➔ Optional Data Sections This page is only visible if the Level Lookup option is chosen. Notes:

enabled on the first tab page. Contains data on the material in the clarified liquor layer. Content tab - contains data on the material in the pond. Preset

a single stream. This is before any Evaluation Block (RB, EHX, MU) models are evaluated. LXXX tab - contains data on the solids and liquids content in

database and replace it with the default SysCAD data. You may choose to overwrite the default data with your own data after the upgrade step. ALL SysCAD 9.2 databases

enhancements compared to the Flash Tank model such as: It has an Evaluation Block (EB), which allows Phase Change (PC) functionality such as Solubility

SSA Quality management. Importantly SSA.SetData as a user option has been removed, instead to change SSA data, user must select the "Modify" option for