Met Dynamics - Dense Medium Separator

From SysCAD Documentation
(Redirected from MD DenseMedium)
Jump to navigation Jump to search

Navigation: Models ➔ Met Dynamics Models ➔ Met Dynamics - Dense Medium Separator

Met Dynamics
Overview 		Met Dynamics
Classifier 		Met Dynamics
Crusher 		Met Dynamics
Dense Medium Separator 		Met Dynamics
Flotation 		Met Dynamics
Gravity Concentrator 		Met Dynamics
HPGR 		Met Dynamics
Hydrocyclone 		Met Dynamics
Magnetic Separator 		Met Dynamics
Mill 		Met Dynamics
Pump 		Met Dynamics
Screen

Latest SysCAD Version: 25 October 2024 - SysCAD 9.3 Build 139.36522

Related Links:

Available from Build 139.35544.

General Description

The Dense Medium Separator model is designed to split solids based on size distribution and/or density. Therefore, the feed should contain solids with size distribution information. The model will calculate the split of solids between the floats and sinks streams based on the cut point (either calculated or defined) and the size distribution/density of the feed stream. The user can select any of the following methods:

  • User defined partition curve
  • Pivot partition curve
  • Stochastic partition curve
  • Baguley-Napier-Munn model

Requires Met Dynamics Add-On and license from Met Dynamics.

Diagram

MD DMS.png

The diagram shows the default drawing of the Dense Medium Separator, with all of the streams that are required for operation of the unit.

The physical location of the streams connecting to the Dense Medium Separator is unimportant. The user may connect the streams to any position on the unit.

Inputs and Outputs

Label Required
Optional		 Input
Output 		Number of Connections Description
Min Max
Feed Required In 1 10 The slurry feed/s to the unit
Floats Required Out 1 1 Floats outlet from the unit
Sinks Required Out 1 1 Sinks outlet from the unit

Model Theory and Data Sections

Please refer to following Met Dynamics wiki pages for further information:

Adding this Model to a Project

Add to Configuration File

Sort either by DLL or Group:

  DLL:
MetDynamics.dll
 → Units/Links → Met Dynamics: Dense Medium Separator
or Group:
Size Distribution
 → Units/Links → Met Dynamics: Dense Medium Separator

See Model Selection for more information on adding models to the configuration file.


Insert into Project Flowsheet

  Insert Unit → Met Dynamics → Dense Medium Separator

See Insert Unit for general information on inserting units.

Retrieved from "https://help.syscad.net/index.php?title=Met_Dynamics_-_Dense_Medium_Separator&oldid=80777"