Search results

controlled will have a coloured arrow indicating this fact to the user. In addition to this, the user may right click on the tag and a menu will be visible with

Viscosity is Ns/m² User can use a number formats for entering viscosity data into the SysCAD database: Constant - User can enter a constant value Equations for

[math]\displaystyle{ S =\matrix{H_2 \\ CH_4\\ O_2\\ H_2O\\ CO\\ CO_2\\} \pmatrix{ 0 & 0 & 2 \\ 0 & 1 & 4 \\ 2 & 0 & 0 \\ 1 & 0 & 2 \\ 1 & 1 & 0 \\ 2 & 1 & 0 \\} \quad

Navigation: User Guide ➔ COM Automation ➔ Testing if SysCAD is Open in VBA Generally a COM Automation macro is written to start SysCAD, load a project

Navigation: User Guide ➔ Mass and Energy Balance SysCAD will always try to maintain a mass and energy balance. For information on how SysCAD calculates

Navigation: User Guide ➔ COM Automation ➔ Python Automation ➔ Example - Database Access Manually entering a lot of data into the database can be tedious

stand-alone unit; or as part of a Flash Train. The user sets the operational mode of the Evaporator. However, if the user sets the mode as Flash Train and the Evaporator

-rr[:, 0]**2/rr[:, 1] ## Affinity DeltaN2O4 = -np.diff(rp[:, 1]) ## Change in [N2O4] N2O4Term = k*(rp[:-1, 1]+rp[1:, 1])/2. ## Average value of [N2O4] in each

stand-alone unit; or as part of a Flash Train. The user sets the operational mode of the Evaporator. However, if the user sets the mode as Flash Train and the Evaporator

set nFC = -2, nC = 2 : [math]\displaystyle{ \left(\cfrac{A_o - A^*}{F}\right)^2=\left(\cfrac{A_o - A^*}{C}\right)^2 \times \cfrac{C^2}{F^2} }[/math] SAL

stand-alone unit; or as part of a Flash Train. The user sets the operational mode of the Evaporator. However, if the user sets the mode as Flash Train and the Evaporator

BaseFilesUser\Symbols folder. The purpose of the ..SysCADxxx\BaseFilesUser\Symbols folder is for user defined symbols. For example, if the user creates

converged. Recycle Between Ties 1 0 1.0 2 0.5 1.5 3 0.75 1.75 4 0.875 1.875 5 0.9325 1.9325 .... 18 0.99999905 2 SysCAD has an implementation of the method

to SysCAD 9.2. For a full list of differences between SysCAD 9.1 and SysCAD 9.2, please refer to SysCAD 9.2 Release Notes. Install SysCAD 9.2. This should

Navigation: User Guide ➔ COM Automation ➔ Python Automation ➔ Example - Optimisation Related Links: Example Project - ChemApp with Python Optimisation

75694246e+02, 1.76991503e+02, 2.72699554e+01, 1.28469206e+01, 6.32469251e-01, 2.60232738e+00, 5.87385513e-01, 1.45618792e+01, 5.32841733e-02, 2.42947148e+01, 4.20754018e-02])

configuration file. In Step 2 of 2, select the Calculations tab Follow instructions given in Calculation Configuration User can add customised species calculation

Similarly, if T2 > TUpper Limit then: [math]\displaystyle{ \Delta H _{T_{upperlimit} \quad \; \to \; T_2} \; = Cp_{T_{upperlimit}} \quad *\left ( T_2 - T_{upperlimit}

TagValue("FEED_ppm_SET.TC[1].User.Value")) ## Print another tag print ("Changing value to 45 ppm") Tags.SetTagValue("FEED_ppm_SET.TC[1].User.Value", 45) ## Change

model is to be used for scenario testing, it is recommended to save a scenario file for each test case performed, so that user can quickly recall the scenario