Met Dynamics - Classifier

From SysCAD Documentation
(Redirected from MetDynamics - Classifier)
Jump to navigation Jump to search

Navigation: Models ➔ Met Dynamics Models ➔ Met Dynamics - Classifier

Met Dynamics
Overview
Met Dynamics
Classifier
Met Dynamics
Crusher
Met Dynamics
Dense Medium Separator
Met Dynamics
Flotation
Met Dynamics
Gravity Concentrator
Met Dynamics
HPGR
Met Dynamics
Hydrocyclone
Met Dynamics
Magnetic Separator
Met Dynamics
Mill
Met Dynamics
Pump
Met Dynamics
Screen

Latest SysCAD Version: 25 October 2024 - SysCAD 9.3 Build 139.36522

Related Links:


Available from Build 139.35544.

General Description

The Classifier mixes perfectly all the incoming feed streams and then, based on the user configuration, calculates the amount, temperature and composition of material reporting to the products. The solid splits are based on the feed size distribution/s and one of the following methods:

  • User defined partition curve
  • Reid-Plitt partition curve
  • Whiten-Beta partition curve
  • Plitt-Flintoff gravity classification model

Requires Met Dynamics Add-On and license from Met Dynamics.

Diagram

MD Classifier.png

The diagram shows the default drawing of the Classifier, with all of the streams that are required for operation of the unit.

The physical location of the streams connecting to the Classifier is unimportant. The user may connect the streams to any position on the unit.

Inputs and Outputs

Label Required
Optional
Input
Output
Number of Connections Description
Min Max
Feed Required In 1 10 The slurry feed/s to the unit
OverFlow Required Out 1 1 The over flow from the unit
UnderFlow Required Out 1 1 The under flow from the unit

Model Theory and Data Sections

Please refer to following Met Dynamics wiki pages for further information:

Adding this Model to a Project

Add to Configuration File

Sort either by DLL or Group:

  DLL:
MetDynamics.dll
Units/Links Met Dynamics: Classifier
or Group:
Size Distribution
Units/Links Met Dynamics: Classifier

See Model Selection for more information on adding models to the configuration file.


Insert into Project Flowsheet

  Insert Unit Met Dynamics Classifier

See Insert Unit for general information on inserting units.