Template:DSp Data Section

Tag (Long/Short)	Option	Description
Content (Tag Display and Flow Basis)
SpeciesTag		The Species Long / short button is used to change the display of the Species names between the Short form, the Chemical compound, or the longer species names. See Species Long/short Example for more information.
SpBasis	All	The total mass or moles of the stream will be used when calculating fractional values.
	Phase	The mass or moles of each phase (solid, liquid or gas) will be used when calculating fractional values.
	Individual Phase	The mass or moles of each Individual phase (solid, liquid, aqueous, organic, gas, etc.) will be used when calculating fractional values.
Species View Options
Mass Flow	Mass Flow Rate of the species, phase or total.	This mode will overwrite the QmReqd configured on the first page. The total flow rate delivered by the feeder will be the sum of all the species flow rates.
Mass Frac	Mass Fraction of the species or phase.	The total flow rate delivered by the feeder will be based on the QmReqd configured on the first page. The total fractions will always add to 100%.
Mole Flow	Mole Flow Rate of the species, phase or total.	This mode will overwrite the QmReqd configured on the first page. The total flow rate delivered by the feeder will be the sum of all the species flow rates.
Mole Frac	Mole Fraction of the species or phase.	The total flow rate delivered by the feeder will be based on the QmReqd configured on the first page. The total fractions will always add to 100%.
============== Totals
Total	Calculated [c]	The total value for the chosen view. For fraction views, the total fractions will always add to 100%.
Solids	Input or Calculated [c]	This is the total for the solid phase occurrence. For the FeederSink unit, if the Feeder Operation Selection allows solids, then this field may be set by the user or default to 100%.
Liquids	Input or Calculated [c]	This is the total for the liquid phase occurrence. For the FeederSink unit, if the Feeder Operation Selection allows liquids, then this field maybe set by the user or default to 100%.
Vapours	Input or Calculated [c]	This is the total for the vapour phase occurrence. For the FeederSink unit, if the Feeder Operation Selection allows vapours, then this field maybe set by the user or default to 100%.
Individual phase X	Input or Calculated [c]	If the Individual Phase basis is chosen, then additional fields will appear for the flow or fraction of each individual phase total. The individual phase is defined in the SysCAD database, see Species Definition
============== Phase / Individual Phase (Species layout is set in the cfg file.)
Species X	Input	User can enter the composition of each species for the chosen view.
Species Calculation X	Calculated [c]	Any user defined Species Calculations maybe visible here.
Example: We are given an ore analysis on a dry mass basis with a moisture content of 5% by mass. Use the MassFrac with SpBasis set to Phase. First enter 5% in the Liquids % field and 100%Liq for H2O(l), this is the input for the liquid phase. Now enter 95% in the Solids % field for the solids fraction. Then we enter the ore analysis; say 90%Sol for CaCO3(s) and 10%Sol for MgCO3(s).
Global Material View Options
ImageColumnCount	The default number of columns displayed on the DSp (Define Species Flow) tab is 2. However, the user may change the number of columns displayed by changing this value, the maximum is 4. This can also be changed on the Views Tab of the Plant Model, hot jump is provided by the next variable below.
ViewOptions	Use the magnifying glass hot jump to go to the Views Tab
FixUpStrategy	Only relevant if the Mass Frac or Mole Frac View options are chosen. Allows SysCAD to 'fix' the stream make up to 100% if the sum of the numbers entered is less than or greater than 100%.
	Largest	SysCAD will increase or decrease the fraction of the species with the largest unmodified fraction. If one of the phase options is chosen for the Basis, then the species adjusted will be the largest in that phase. If there is a tie for largest, then the bottom (last) in-use species in the list is selected. Exception: If all species in use are specified (i.e. all others are zero), then all species are scaled up proportionally. Note: If the fraction exceeds 100%, then several species may need to be adjusted from the largest down until the total adds to 100%.
	BottomUp	SysCAD will increase or decrease the fraction of the species which is at the bottom (last) of the list of species. If one of the phase options is chosen for the Basis, then the species adjusted will be the last in that phase. Note: If the fraction exceeds 100%, then several species may need to be adjusted from the bottom up until the total adds to 100%.