Search results

Script file is set up to do the following: ; 1) Define the column number to use for test data ; 2) Sets the test data by executing SetTags (this is equivalent

Navigation: User Guide ➔ Menu Commands ➔ View ➔ Solver Settings ➔ SS Finder Available from Build 139.31800. This tab page is only visible if "SSF.On" tickbox

fields visible if the user selects the 'Selection/Breakage' method. Test Data - The fields visible if the user selects the 'Test Data' method. Results

the remaining smaller sizes as follows +0.5mm (1%), +0.1mm (1%), +0.01mm (1%) and -0.01mm (2%). The user defines the selection and breakage function of

= \frac{|V_1 - V_2|}{\epsilon_a + \epsilon_r M} }[/math] Normalised relative error [math]\displaystyle{ Converged = e_N \lt 1 }[/math] Test for converged

cases without further user input. As is, this file is used to test the sensitivities of TWO variables. User can define the test value range for the two

Navigation: User Guide ➔ COM Automation ➔ Python Automation ➔ Example - Unit Test Framework Unit Testing is important. Running a model to compare previous

F(i+1)*[1 - P(i+1)/A(i+1)]}} }[/math] where F(i) is the feed in for this size fraction i F(i+1) is feed in for the next largest size fraction i+1 Define

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Colours NOTE: The colour layers are in the order of importance, as shown in the following

the model would give the user a warning: SFW wash loss 7.5 is out of user specified range of data points (0 to 5) User without test data may set up a simple

[math]\displaystyle{ P(t) = \dfrac{1}{2dev} }[/math] (if Tavg - dev <= t <= Tavg + dev) Gaussian: [math]\displaystyle{ P(t) = \cfrac{1}{dev\sqrt{2\pi}}\cdot e^{

method of representing heat transfer between the unit and the environment. The user may set the final temperature in the unit, or an energy loss or gain to the

Report. Step 1: Create the SysCAD project, make sure the project is solved. Step 2: Set up an excel report for the sensitivity analysis. (Test Cases.xls)

maximum value of byte type. i = 0.1 ;i = 1 (true) Bit is true if i ≠ 0 i = 12 ;i = 1 (true) Bit is true if i ≠ 0 i = -3 ;i = 1 (true) Bit is true if i ≠ 0 i

alert the user to this. Please refer to section Hints and Comments for more comprehensive hints on how to troubleshoots the controller, user can also have

VersionNumber(1) & " Build " & App.VersionNumber(2) & "." & App.VersionNumber(3) Application.StatusBar = "Started " & Version 'MsgBox Version '== Test Build number

required to be able to insert these models into a project, it is required if the user wishes to use any of the PSD methods within the models. Some models require

system when a user exits SysCAD. If you open the SysCAD License Utility located in the license folder, this counts as one of the network user licenses. If

Navigation: User Guide ➔ Windows ➔ Controls Window Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 Related Links: Control Commands, Controls

by the SysCAD developer), user may need to contact the dll owner for an update where possible. If no new dll is available, user may be locked into an older