Search results

database and replace it with the default SysCAD data. You may choose to overwrite the default data with your own data after the upgrade step. ALL SysCAD 9.2 databases

The first tab page in the access window will have this name. This tab page is only shown if "Method=Condensing" and "Layout = Tube Detail". This tab page

the syntax is as follows: 1. If the required variable is on the first tab page (or any page with same name) of the access window and not indented below

FEM_Reaction option on the first page is NOT enabled then the following tab pages are NOT shown: FEM, Solver, Analysis, Results, VCS Data and QFEM. Unit Type:

sub-models are solved using the drop down lists on the first tab page - Off, On-AutoSequence, On-Sequence1, On-Sequence2, etc. The AutoSequence option will

Optional tab, only visible if the TotalStore.Calculate option is enabled on the first tab page. The combined total of all stores. This series of tabs also

Calculation Configuration. LPC Tab (Leg Evaluation Block Solubility On) Select the Potash solubility System. NOTE the Potash Solubility data requires the Potash Addon

Examples. Unit Type: Evaporator - The first tab page in the access window will have this name. HX - Optional tab, only visible if an Internal Heat Exchanger

input the data points directly into the Spline Table data without the need to first fit it to a curve. Repeat the above for Ca[OH]2(aq) Once the data has been

calculation Examples. Unit Type: FFEvaporator4 - The first tab page in the access window will have this name. The page contains the results fields. Add to Configuration

be updated. One common example is XXX.Prod.HeatFlow is now XXX.HeatFlow (was shown on the Output tab page, now shown on the Results page). Once the projects

statement as well as the table data. There are many examples of the tag select reports, these are documented on a separate page, please see Excel Tag Select

unit. Each of the outputs has a common period (one year) so we can select the CommonPeriod option on the first tab. Data for each of the signals is then

LPrandtlNo). In a Dynamic Tank, the "SpeciesFilter" Filter.Method (on the Connect tab page) does not upgrade, as the possible selections with this option have

Historian files - Histxxxx.xxx. Used to store data when historian is switched on. Various Project ini files Controls.Data (This was called Other.dat in Build 138

PotashEvaporator - The first tab contains general information that can be set by the user. Results - This tab contains the unit results. HX - Optional tab, only visible

ShowQRxnBypass is enabled on the TCE tab page. QFeed - Optional tab, only visible if ShowQFeed is enabled on the first tab page. This page shows the properties

red in the above picture. If the user disables the unit, by un-ticking the On tick box, then the following actions occur: All streams connected to the 'Shell'

ShowQRxnBypass is enabled on the TCE tab page. QFeed - Optional tab, only visible if ShowQFeed is enabled on the first tab page. This page shows the properties

Model, under the section "SSA" located on the Content or Qi tab page respectively; the user MUST tick the SetData box and enter the appropriate values,