Search results

points at which we want to evaluate the model. We also create a vectorized function which is used to evaluate the model at each of the points. We use the resulting

species model in the configuration file as shown below. It is then possible to select the Bayer model (either Bayer3 or a client-specific Bayer model). On

Cell model The use of the Evaporator model as a crystalliser The use of the Filter Press model The use of the Evaporation Block (Evap) sub-model The use

New Models and Add-Ons Model Improvements Model Enhancements New Models: Solids Recovery Unit : suitable for modelling solid recovery processes

This example demonstrates using a number of tools to tune a steady state model (SysCAD project) based on data. This uses the Demo Precip Circuit in the

database is used by the flash train section of the model. Note that Gypsum precipitation temperature is different to the Minteq_v4 database (used in the standalone

the Flotation Cell model. The use of the General Separator model. The use of the Filter Press model. The use of the Evaporator model. The use of the Simple

Collaborative Model Development Services - this involves assistance and/or involvement in developing SysCAD projects (Base Case Plant Model). These services

Features Demonstrated Reverse Osmosis (RO) unit model General Separator unit model Pressure Exchanger unit model General Controller Material Flow Section -

every unit model. Combines old Audit and Closure. Removed some tags. Audit layout and tags have significantly changed, refer to Plant Model - Audit page

is modelled by a Tank with the EHX sub-model enabled to achieve the desired product temperature All Thickeners are modelled by the Thickener model using

projects: Cooling Tower Project Evaporation Project Precipitation Projects using SSA Yield Method Precipitation Project using Full PSD

option to Include All model - for improved usability when selecting unit models from model library dlls: For Edit Configuration - Model_Selection step, added

overview of the model, controls and SysCAD features. We'll also discuss potential improvements which could be made if adapting this model to a match a real-world

for configuring the model is: Make sure the project contains at least one of the ChemApp Model Configuration model, and the model is loaded with the correct

Project User Value 1 (set in Plant Model) (equivalent to Q) Val(2) = reference to Project User Value 2 (set in Plant Model) (equivalent to K') C_Li = a previously

other PHREEQC unit models such as the PHREEQC Side Calc Model or PHREEQC Reactor referencing this PHREEQC Model Configuration unit model will use the mappings

checked before the model can run. Model results will need to be reviewed and the model may need to be retuned. Fix for Precipitation3 new Agglom.UseMidSize

Shell and Tube Heat Exchanger 2 - Bug Fix for Shell and Tube 2 model with reaction sub-model in use, the LMTD calculations has been corrected to include heat

Leach, Weak Acid Leach, Hot Acid Leach and Super Hot Acid Leach. Iron Precipitation to remove the iron Purification where various metals are separated Zinc