Search results

then the user can access the Solver Setup (ProBal) dialog box to set the solve options. If one of the Dynamic modes is selected, then the user can access

may be useful if the user is in the feasibility study phase where the SysCAD flowsheet can remain untouched and many sets of test cases need to be performed

er})^2} {\operatorname{MaxI} - \operatorname{MinI}} }[/math] Examples - GC_1.value1 = 100: GetSqr(GC_1.value1,0.2) ;returns 400. Thus (10*0.2)^2 GetSqr(GC_1

Navigation: User Guide ➔ COM Automation ➔ C++ Automation Below is a C++ source code that can be compiled to a console application. The example is similar

the General Separator is unimportant. The user may connect the streams to any position on the unit. If the user disables the unit, by un-ticking the On tick

Therefore, please take care when using 'QProd', and if necessary test the values by displaying test values from different functions. As an example, when using

recommended. The user specifies how many tables of data are required (maximum is 500), the frequency of reporting (each table may be reported at a user specified

Navigation: User Guide ➔ Edit ➔ Find Units using Query Related Links: Quick Find This feature allows user to search Any SysCAD variable using TagSelect

"_Y_", 3) ;r = "SysCAD" (nothing to replace) r = StrReplaceFrom(s, "s", "_Y_", 2) ;r = "Sy_Y_CAD" (case sensitive) w = StrLen(s) ;w = 6 r = StrUpr(s) ;r = "SYSCAD"

may contain user defined individual phases. However, the phase description must match what has been defined in the species database. User must check the

Navigation: User Guide ➔ View ➔ Plant Model ➔ Settings This tab page on the Plant Model Access Window has a number of parameters that the user may either

distribution data can be defined as Overall Test Data (PRIMARY_MILL) or Individual Test Data (SECONDARY_MILL). The Crusher2 unit model is used to emulate the mill

DotProduct = y.inner(y2) ;sum of each element y_i * y2_i, returns 45068 EndSub ;Logic d = a.GetLen() ;gets the array length a.SetAll(2.2/2) ;sets all elements

a dynamic matrix and manipulate its elements. The user may read in a matrix from a text file. The user may set constant values into a matrix when it is

QFeed and QProd to Compressor, Valve 2, Pump 2, Piping System Model and Pressure Exchanger. Improved management of user selection of conversion units in the

[math]\displaystyle{ C(x) = 1-\left(\cfrac{K_2-x}{K_2-K_1}\right)^{K_3}, \qquad K_1 \lt x \lt K_2 }[/math] Where the parameters K1, K2 and K3 can be entered directly

location. See also: How do I send a project to another user? How do I open a project sent from another user? Why can't I open the OLI project created by others

3. SysCAD 9.2 Build 135 is the last release of SysCAD 9.2. Please see Revision History for SysCAD 9.2 for details on changes in SysCAD 9.2 versions. SysCAD

these occur as Halite (NaCl), Sylvite (KCl), Bischofite (MgCl2.6H2O), and Carnallite (KCl.MgCl2.6H2O). Exactly which species are produced in crystallisation

From within the Configuration Editor at Step 2 of 2, double click on a species or click on the Edit User Database button. In the 'Project Configuration'