| IMPORTANT: The videos here supplement the SysCAD Introductory Tutorial located in the install directory at SysCADxxx\Tutorial\SysCADIntroductoryTutorial.pdf (or SysCADBasicTutorial.pdf in earlier versions). Refer to this document for detailed instructions.
|
Navigation: User Guide ➔ Tutorial ➔ Tutorial Videos ➔ Merging and Modifying Projects
Latest SysCAD Version: 25 October 2024 - SysCAD 9.3 Build 139.36522
Related Links: Open Project with Alternate Cfg, Merge Project, Edit Graphics Commands
Section 7 Overview
Please use these videos together with Section 7 of the SysCAD Introductory Tutorial, which is distributed with the SysCAD full install.
We will continue to use the project that we have constructed and modified in the previous sections of the Tutorial as well as an existing project, Tut.07.1(CCD Circuit Only).spf.
In this section we use will carry out the following exercises:
- Open a project with an alternate configuration;
- Merge 2 projects together;
- Make modifications to the merged project; and
- Connect the 2 flowsheets in the merged project.
NOTE:
- In the following sections, the section number displayed alongside the videos have been updated to align with the latest tutorial documentation. These may not correspond with the original document used to create the videos.
Open a Project with Alternate Configuration
|
- Section 7.2: This shows you how open a project with an Alternate Configuration.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Merge 2 Projects together
|
- Section 7.3: This video shows you how to merge 2 projects together.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Change a Unit
|
- Section 7.5: Shows how to change the unit type - this changes the underlying mathematical model without changing the graphical symbol.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Delete a Unit or Units
|
- Section 7.5: Shows how to Delete a unit, or group of units from a SysCAD flowsheet.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Change the Size of a Graphical Unit
Please insert the Washer unit into the flowsheet before watching this video.
|
- Section 7.5: Shows how to change the size of a graphical unit in a SysCAD flowsheet.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Rotate and Move Graphical Units
|
- Section 7.5: Shows how to Rotate and Move a graphical unit and how to align a group of graphical units.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Using Arrow Keys to Move, Rotate and Resize Graphical Units
|
- Section 7.5: Shows how to use arrow keys to Move, Rotate and Resize a graphical unit.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 136.19514
|
Insert Links - Review
|
- Section 7.5: This video is a review of Insert Links, including how to move a single segment of a Link.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Redraw Link
|
- Section 7.5: This video shows you how to Redraw an existing Link.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Change Symbol
|
- Section 7.5: This video shows you how to change the graphical symbol of a unit. The underlying Mathematical model is NOT changed.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Insert Text
|
- Section 7.5: This video shows you how to insert Text into a SysCAD Project.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Using Data Transfer
|
- Section 7.6: This video shows you how to configure multiple units with the same variables using the Data Transfer functionality.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Using Copy and Paste for Graphics
|
- Section 7.7: This video shows you how to copy an entire flowsheet and paste it onto a new Graphics page.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|
Connecting Flows across Graphics Windows
Please make the following modifications before connecting the 3 flowsheets:
- Change the CCD circuit as described in section 7.7.3 in the Tutorial document; and
- Add the CCD Wash controller, described in section 7.8.
|
- Section 7.9: This video shows you how to connect flows between Graphics pages.
- YouTube link (Allows you to watch in Full Screen mode)
- Build 135.15159
|