Introductory Tutorial - Makeup and Environmental Heat Exchange
(Redirected from Basic Tutorial - Makeup and Environmental Heat Exchange)
Jump to navigation
Jump to search
IMPORTANT: The videos here supplement the SysCAD Introductory Tutorial located in the install directory at SysCADxxx\Tutorial\SysCADIntroductoryTutorial.pdf (or SysCADBasicTutorial.pdf in earlier versions). Refer to this document for detailed instructions. |
Navigation: User Guide ➔ Tutorial ➔ Tutorial Videos ➔ Makeup and Environmental Heat Exchange
Latest SysCAD Version: 26 September 2024 - SysCAD 9.3 Build 139.36389
Related Links: Makeup Source, Makeup Block, Environmental Heat Exchanger
Section 9 Overview
Please use these videos together with Section 9 of the SysCAD Introductory Tutorial, which is distributed with the SysCAD full install.
We will continue to use the project that we have constructed and modified in the previous sections of the Tutorial.
In this section we will look at:
- How to insert and configure a Makeup Source with a 50% NaOH solution;
- Add and Configure a Makeup Block in a tank;
- Optional - Review results from the Makeup Block;
- Add an Environmental Heat Exchanger sub-model to a unit and set a Temperature drop of 1C.
Insert and Configure a Makeup Source
|
Add and Configure a Makeup Block
|
Optional - Review results from Makeup Block
|
Add a EHX with Temperature Drop
|