Search results

Links: Solid-Liquid Separator, Solids PSD Method - Model Theory This model can be used as a general separator, especially for separating solids and liquids

number of streams that can be connected to each connection. Model Theory The method by which the unit calculates the material split. Any equations used

Precipitator3 Model Theory for full detail, which include: Growth Method Theory Seed Surface Area Bound Soda See also Alumina3 Precip - Full PSD for notes on

The underlying theory was originally developed by Hounslow et al[1]. The precipitation PSD method uses the full Size Distribution (PSD) Quality. The present

calculation methods, user may select which method to use in the project. Please note that the method selected is Global to the project. The method and Constants

the Size Distribution(s) for the solids in the unit. Please see Size Distribution (PSD) for more information. The methods of defining the Size Distribution

at a required pressure (or temperature) using the user defined VLE method. Any solids that may be in the stream entering the unit are ignored in the flash

screening methods available to define the solids split: Simple, no PSD; A partition curve is used to calculate the screen products; Whiten method; Karra method

data. If solid species have no individual size distribution data defined (let's call these solids the remaining solids), then the remaining solids will follow

SplitMethod as 'Solids Separation' and SolidsSeparMethod as 'Solids PSD' will be selected automatically Choose an appropriate PSD separation method: Partition

name. Only visible when Precip.Method = PSD. Please See Precipitation using Full PSD for more information on theory and method. If ShowRates is selected, the

or "User SSA" for the "Precip.Method". See Alumina3 Precip - Full PSD where full PSD is used to calculate SSA. These methods assume that material is deposited

and OF Solids Fraction may be defined by swapping the OF/UF connections and choosing "Recovery to UF" and "UF Solids Fraction". If this method is chosen

fractional basis and how the flows in columns 2 onwards are displayed. The method by which Fractions and Concentrations is calculated is affected by the Phase

when the Method selected is 'Whiten Crusher'. See Model Theory - Whiten Crusher Method for more information. This tab will be visible when the Method selected

the Recovery Method, then an additional tab will be visible, called Recovery. This will display a table of the size intervals for all solids species in the

at a required pressure (or temperature) using the user defined VLE method. Any solids that may be in the stream entering the unit are ignored in the flash

there are no solids in the pipes. Check the Feeder that should contain solids with a size distribution does actually have the required solids. If user chooses

at a required pressure (or temperature) using the user defined VLE method. Any solids that may be in the stream entering the unit are ignored in the flash

Models ➔ Solids Recovery Unit This model is available in SysCAD 9.3 Build 138 or later. The Solids Recovery Unit can be used to model a variety of solid recovery