View source for Template:EB Evaluation Data Section


|-
{{#ifeq: {{{Solubility}}}| No 
|
|<td> Solubility.On <td> Tickbox <td> Only visible if Solubility has been defined for at least one species in the project. Allows the user to switch on any predefined [[Species Table - Phase Change#Solubility|solubility]] curve to adjust the composition of material in the unit.  
<tr>
|
}}
|-
{{#ifeq: {{{PhaseChange}}}| No 
|
|<td>PhaseChange@T.On <td> Tickbox <td> Only visible if [[Species_Table_-_Phase Change#PhaseChange at Temperature|Phase Change at Temperature]] has been defined for at least one species in the project and [[Plant_Model_-_Species#Auto_Phase_Change_Equilibrium|Plant Model - Species Tab]] - ''PhaseChange@T'' = OFF. Allows the user to switch on any predefined phase changes at temperature in the unit.
<tr>
|
}}
|-
| valign="top" | EvalSequence ||font style="background: #ebebeb"|Calc  ||The sequence in which the sub models (which are part of the evaluation blocks) will be calculated. The sequence is determined by the priority selection for the individual sub-models. <br>'''Note:''' If the user chooses ''On-AutoSequence'' then SysCAD will determine the sequence of the sub-models. The auto evaluation sequence followed will be the order the sub models are listed below.
|-
{{#ifeq: {{{Makeups}}}| Yes |
<td> Makeups <td> Input <td> The number of [[Makeup Block (MU)|Makeup Blocks]] required. Extra dropdown options Makeup1, Makeup2, etc. will be added to allow these to be switched on and off and prioritised in relation to the other sub-models.  
<tr>
<td> MakeupX <td> List <td> This can be used to switch the [[Makeup Block (MU)]] on or off and prioritise it in relation to the other sub-models. If this is 'On' then the associated page, MUX becomes visible and may be configured. <br> '''Note''': This field is only visible if the entry for 'Makeups' is greater than 0. If there is one makeup then X=1. If there are two makeups, then X=1 and X=2, etc.
<tr>
|
}}
|-
{{#ifeq: {{{Reactions}}}| Yes |
<td>Reactions <td> List <td> [[Reaction Block (RB)]] - Enable or disable Reactions and set the sequence in relation to the other sub-models. If this is 'On' then the associated page, RB becomes visible and may be configured. <br> '''Note''': The user does not have to configure a reaction file, even if this block is checked.
<tr>
|
}}
|-
{{#ifeq: {{{HeatXChg}}}| Yes |
<td> HeatXChg<td> List <td> This can be used to switch on the [[Heat Exchanger (HX)]]. If this is 'On' then the associated page, HX becomes visible and may be configured. <br> '''Note''': The user does not have to configure the heat exchange, even if this block is checked.
<tr>
|
}}
|-
{{#ifeq: {{{EnvironHX}}}| Yes |
<td> EnvironHX <td> List <td> [[Environmental Heat Exchanger (EHX)]] - Enable or disable Environmental Heat Exchange and set the sequence in relation to the other sub-models. If this is 'On' then the associated page, EHX becomes visible and may be configured. <br> '''Note''': The user does not have to configure an environmental heat exchange, even if this block is checked.
<tr>
|
}}
|-
{{#ifeq: {{{Evaporation}}}| Yes |
<td> Evaporation <td> List <td> [[Evaporation Block (Evap)]] - Enable or disable the Evaporator and set the sequence in relation to the other sub-models. If this is 'On' then the associated page, Evap becomes visible and may be configured. <br> '''Note''': The user does not have to configure an evaporator, even if this block is checked. 
<tr>
|
}}
|-
{{#ifeq: {{{VLE}}}| Yes |
<td> VLEquilibrium <td> List <td> [[Vapour Liquid Equilibrium (VLE)]] - Enable or disable Vapour Liquid Equilibrium and set the sequence in relation to the other sub-models. If this is 'On' then the associated page, VLE becomes visible and may be configured. <br> '''Note''': This option may automatically adjust the species make-up.
<tr>
|
}}
|-
{{#ifeq: {{{Discard}}}| Yes |
<td> Discard <td> Input <td> The number of discard blocks required. Extra dropdown options Discard1, Discard2, etc. will be added to allow these to be switched on.
<tr>
<td> DiscardX <td> List <td> This can be used to switch the Discard Block (DB) on or off and prioritise it in relation to the other sub-models. If this is 'On' then the associated page, DBX becomes visible and may be configured. <br> Note: This field is only visible if the entry for 'Discards' is greater than 0. If there is one discard then X=1. If there are two discards, then X=1 and X=2, etc.
<tr>
|
}}