Template:TCE Tab Page

Tag (Long/Short)	Input / Calc	Description/Calculated Variables / Options
'
Chemistry Model
ChemModel...
UnitTag	List	The tag of the relevant {{{TCE}}} Model Configuration unit model- this may be chosen from the drop down list of all {{{TCE}}} Model Configuration unit models available in the project.
ModelCfgTagUsed/ModelCfgTag	Display	The tag of the relevant {{{TCE}}} Model Configuration unit model.
Check		If the user clicks on this button, SysCAD will check that the UnitTag is a valid {{{TCE}}} Model Configuration unit model.
ConnOK	Tickbox	If SysCAD finds a valid {{{TCE}}} Model Configuration unit model, then this field will be enabled.
Status	OK	The specified chemistry model ({{{TCE}}} Model Configuration) has been initialised correctly and the database file has been found and loaded correctly.
	ChemModel Tag not Specified	No tag has been specified for the Chemistry Model. Specify the desired Chemistry Model ({{{TCE}}} Model Configuration) in the UnitTag field.
	Valid ChemModel Tag Required	The tag specified for the Chemistry Model in the UnitTag field is invalid and needs to be corrected.
	Init Required	The specified Chemistry Model ({{{TCE}}} Model Configuration) needs to be initialised.
	ChemModel Load Required	The database of the specified Chemistry Model (({{{TCE}}} Model Configuration) needs to be loaded.
	DLL or Version Error	There is a problem with the {{{TCE}}} DLL or version.
	Init Failed	Initialisation of the specified Chemistry Model (({{{TCE}}} Model Configuration) has been attempted but failed.
Calc.Status	Idle
	Calculating
Select actions if species unmapped
FwdSpMap.UnmappedAction	Stop Solver	Any unmapped SysCAD species will cause the solver to stop, user will need to fix the species mapping before solving again.
	Bypass	Any unmapped SysCAD species will be bypassed, i.e. will not be present in the {{{TCE}}} input
RevSpMap.UnmappedAction	Make Inactive	Any unmapped SysCAD species will cause the model to be inactive.
	Stop Solver	Any unmapped SysCAD species will cause the solver to stop, user will need to fix the species mapping before solving again.
	Allow Solve	Any unmapped SysCAD species will be ignored. Model will solve but will have a mass balance error.
ActionOnError	Continue	The model will continue solving if the {{{TCE}}} calculation fails.
	Pause	The model will pause solving if the {{{TCE}}} calculation fails.
	Stop	The model will stop solving if the {{{TCE}}} calculation fails.
Requirements
VLEModel	Display	Displays the VLE model used.
WithBypass	Tickbox	If this is ticked, then the Bypass tab page will appear.
Select dependent variable and target value
OpMode...
Target calculation details (only displayed if OpMode ≠ Temperature or FeedT)
TargCalc...
UseRelaxation	Tickbox
RelaxationFactor	Input	The RelaxationFactor, used when UseRelaxation is ticked. Values limits: 0.001 < RelaxationFactor < 5.
Settings		If the user clicks on this button, the all the target solver settings will be reset to their default values.
SpMoleFlow / QMl	Display	Only shown if AdjustVar.Method = AdjustQMl. The actual mole flow used of the adjusted species.
SpMoleFlow / Qm	Display	Only shown if AdjustVar.Method = AdjustQMl. The actual mass flow used of the adjusted species.
{{{TCE}}} Environmental Heat Transfer
{{{TCE}}}.HeatLossMethod	None	No heat transfer between the unit and the environment.
	Fixed HeatFlow	The user specifies a fixed heat loss between the unit and the environment.
	Ambient	SysCAD calculates the overall heat loss based on user specified HTC and Area and the temperature difference between the Feed and environmental temperatures. The environmental temperature is assumed to remain constant.
{{{TCE}}}.EHX.HeatLossReqd	Input	Visible when the HeatLossMethod = Fixed HeatFlow. The required heat loss.
{{{TCE}}}.EHX.HTC	Input	Visible when the HeatLossMethod = Ambient. The Overall Heat Transfer coefficient.
{{{TCE}}}.EHX.Area	Input	Visible when the HeatLossMethod = Ambient. The Heat Transfer area.
{{{TCE}}}.EHX.AmbientT	Display	Visible when the HeatLossMethod = Ambient. The ambient temperature. The ambient temperature is specified in the Plant Model - Environment_Tab
{{{TCE}}}.EHX.HeatLoss	Calc	Visible when the HeatLossMethod = Ambient. The calculated heat flowrate.
Options
ShowQUnmapped	Tickbox	Allows the user to view the QUnmapped and associated tab pages. See Material Flow Section. This is the SysCAD species flows which are not mapped to {{{TCE}}} species, and therefore are not taken into account in the {{{TCE}}} calculation.
ShowQRxnUnmapped	Tickbox	Allows the user to view the QRExnUnmapped and associated tab pages. See Material Flow Section.
ShowQBypass	Tickbox	Only visible when WithBypass is ticked. Allows the user to view the QBypass and associated tab pages. See Material Flow Section. This is the SysCAD species flows which bypass the {{{TCE}}} calculation.
ShowQRxnBypass	Tickbox	Only visible when WithBypass is ticked. Allows the user to view the QRxnBypass and associated tab pages. See Material Flow Section.
ShowRxnDiff	Tickbox	Allows the user to view the Diff tab page. This shows the difference between the mapped input stream seen by {{{TCE}}} and the {{{TCE}}} calculation results.
ShowScaling	Tickbox	Available from Build 139.34985. Allows the user to view the Scaling tab page.
PhaseElemDeportment	Tickbox	If this is ticked, then the PhDeport tab page will appear. This tab shows the mass movement of elements for the Solid, Liquid and Gas phases.
IPhaseElemDeportment	Tickbox	If this is ticked, then the IPhDeport tab page will appear. This shows how the elements move between phases due to the {{{TCE}}} calculation results.
ShowPlotter	Tickbox	This option is only visible if this model has been successfully run. Allows the user to perform a parameter sweep using the product stream of the side calculator. If this is ticked, then the ParamSweep tab page will appear.