From SysCAD Documentation
Jump to navigation
Jump to search
| Tag(Long/Short) |
Input / Calc |
Calculated Variables / Options
|
Documentation
|
| EquipDescription / EqpDesc | Input | The user may enter a unit description. This description will then be displayed in the 'GenDesc' field on the first tab page of the unit (see above).
|
| EquipMemo / EqpMemo | Input | The user may enter a description of the unit as text. This field is handled by SysCAD like a normal tag, therefore it can reported and set via Excel.
|
| Link1/2 | Hyperlinks | The user may add a Hyperlink to a web page. There are two fields available for setting Hyperlinks.
|
| EquipIdString / EqpIdStr | Input | The user may enter an equipment identifier that can be used for reporting.
|
| EquipLocation / EqpLocation | Input | The user may enter an equipment location identifier that can be used for reporting.
|
| ReportMe | Tick Box | The user may enter a report key - useful flag to exclude/include models or pipes in Excel TagSelect reports.
|
| ReportKey | Input | The user may enter a report key number - this may be used to select user defined keys for reporting.
|
| GeneralDescription / GenDesc |
Display |
This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field above, this will be displayed here. If this field is blank, then:
- For pipes, SysCAD will use the text in the 'ConnectDesc' field - this displays the Source and Destination tags of the pipe;
- For Feeders/Cross Page Connectors, SysCAD will display the state of the unit, i.e. if it is a Feeder or a Sink, etc.;
- For other units SysCAD will display the unit class ID.
|
System Info
|
| UnitType |
Output |
The unique Type of the model. This will be identical to the title of the first tab page. Useful for selecting types of units/pipes in Excel TagSelect reports.
|
| UnitGroup |
Output |
A group that this UnitType belongs to - Unit, Control, Stream, OtherLink or Electrical. Useful for selecting groups of models in Excel TagSelect reports.
|
| DllName |
Output |
Only available in Build 138 or later. Each SysCAD unit-model is stored and distributed in a "dynamic-link-library" (dll). The name of the dll where the unit-model is stored will be displayed here for user information.
|
| SubTypeList |
Output |
Only available in Build 137 or later. List of all SubType sub models found in this model. There may be one or many of each SubType. These are primarily used in TagSelect for reporting and queries.
|
| AddOnsReqdList |
Output |
Only available in Build 138 or later. Some SysCAD unit-models require specific add-ons to load the model. For example, the Flash Tank 2 unit-model requires the HeatBalance Addon to load. If user does not have the "HeatBalance" add-on license option, then the project will fail to load.
|
| AddOnsUsedList |
Output |
Only available in Build 138 or later. Some SysCAD unit-models require specific add-ons to run the model. For example, the General Separator unit-model using Solids PSD Solids separation method requires the PSD Addon to run. If user does not have the "PSD" add-on license option, then the project will not solve using the PSD option.
|