Template:TCE Results Content Tab

Tag (Long/Short)	Input / Calc	Description/Calculated Variables / Options
{{{TCE}}} Calculation Results Summary
Feed Mass Summary
Bypass.Mass / M	Display	The mass of material in the feed which bypasses the calculation due to user selection of bypass species. Use ShowQBypass to view full stream.
Unmapped.Mass / M	Display	The mass of material in the feed which is not forward mapped to a species and therefore bypasses the calculation. Use ShowQUnmapped to view full stream.
{{{TCE}}}.Feed.Mass / M	Display	The mass of material in the feed to the {{{TCE}}} calculation.
TotalFeed.Mass / M	Display	The total feed mass to the {{{TCE}}} model block. Sum of bypasses and feed to {{{TCE}}} calculation.
Product Mass Summary
{{{TCE}}}.Prod.Mass / M	Display	The mass flow of material in the product of the {{{TCE}}} calculation. Same value as tag Prod.Qm.
RxnBypass.Mass / M	Display
RxnUnmapped.Mass / M	Display	The mass of material in the product which is not reverse mapped to SysCAD species.
TotalProd.Mass / M	Display	The total product mass for the {{{TCE}}} model block. Sum of bypasses and product of {{{TCE}}} calculation.
Solids Yield
Solids.Yield	Display	The solids concentration in the product stream.
Solids.Precip	Display	The change in solids flow, feed-product. A positive value indicates precipitation has occurred. A negative value indicates dissolution has occurred.
Content Properties Summary
Prod...
Temperature / T	Display	The Temperature of the final solution.
Pressure / P	Display	The Pressure of the final solution.
Mass / M	Display	The Mass of the final solution.
Hf@T	Display	The Enthalpy of the final solution per unit mass.
Enthalpy / totHf@T	Display	The Enthalpy of the final solution.
Zeros		If the Hide Zeros button is clicked, all phases/species that have NO mass flow will be hidden. If the Show Zeros button is clicked, all phases/species will be displayed, including those with zero mass flow. Note this setting applies to the subsequent pages as well.
Feed...
Feed Phase Content Summary
(The following table displays a summary of results for the different phases. The table has the following columns (one row per phase)):
Mass / M	Display	The mass of the relevant phase in the feed.
MassFrac / Mf	Display	The mass fraction of the relevant phase in the feed.
Moles / Ml	Display	The moles of the relevant phase in the feed.
MoleFrac / Mlf	Display	The mole fraction of the relevant phase in the feed.
Prod...
Prod Phase Content Summary
(The following table displays a summary of results for the different phases. The table has the following columns (one row per phase)):
Mass / M	Display	The mass of the relevant phase in the final solution.
MassFrac / Mf	Display	The mass fraction of the relevant phase in the final solution.
Moles / Ml	Display	The moles of the relevant phase in the final solution.
MoleFrac / Mlf	Display	The mole fraction of the relevant phase in the final solution.
{{{TCE}}} Energy Balance
{{{TCE}}}.HeatFlow	Display	Difference in enthalpy between the product and feed of the {{{TCE}}} reactions calculated by {{{TCE}}}.
Bypass.HeatFlow	Display	The heat required to adjust the temperature and pressure of the bypass stream to exit conditions.
HeatLoss	Display	The environmental heat loss.
HeatFlow	Display	The heat flow required to achieve the product conditions relative to the feed conditions. Includes environmental heat loss if applicable. This is calculated by {{{TCE}}} and accounts for bypass and heat loss. Note that Bypass heat is calculated by SysCAD.
Forward Mapping Summary
FwdMap.ScdFeed	Display	This displays mass and SysCAD enthalpy of the feed stream to {{{TCE}}} before mapping and after bypass and unmapped are removed.
FwdMap	Display	This displays mass and {{{TCE}}} enthalpy of the Input stream to {{{TCE}}} after forward mapping. The enthalpy of the FwdMap stream and the FwdMap.ScdFeed stream are likely to be different. Some reasons for differences include differences in enthalpy values for pure species and the incorporation of additional solution thermodynamics terms.
FwdMap.Diff	Display	This displays the difference in mass and enthalpy between the feed stream and Input stream. There should never be differences in mass. Small enthalpy differences are expected but large differences may indicate issues with SysCAD database enthalpy data.
FwdMap.RelDiff	Display	This displays the relative difference in mass and enthalpy between the feed stream and Input stream. There should never be differences in mass. Small enthalpy differences are expected but large differences may indicate issues with SysCAD database enthalpy data.
Reverse Mapping Summary
RevMap.TCEProd	Display	This displays mass and {{{TCE}}} enthalpy of the Output stream from {{{TCE}}}. The enthalpy of the RevMap.TCEProd stream and the RevMap stream are likely to be different. Some reasons for differences include differences in enthalpy values for pure species and the incorporation of additional solution thermodynamics terms.
RevMap	Display	This displays mass and SysCAD enthalpy of the Prod stream after reverse mapping.
RevMap.Diff	Display	This displays the difference in mass and enthalpy between the Output stream and Prod stream. There should never be differences in mass. Small enthalpy differences are expected but large differences may indicate issues with SysCAD database enthalpy data.
RevMap.RelDiff	Display	This displays the relative difference in mass and enthalpy between the Output stream and Prod stream. There should never be differences in mass. Small enthalpy differences are expected but large differences may indicate issues with SysCAD database enthalpy data.
Copy Reverse Mapping Reactions to Clipboard
RevMap.IonRxns		Pushing this button copies to the clipboard a list of reactions that were executed to perform the reverse mapping. These can then be pasted into Excel to generate a table.
Calculation Summary
Summary...
LastCalcType	Display	This displays the type of calculation (OpMode) used for the last calculation.
Remove		If the user clicks on this button, SysCAD will remove duplicate error messages received.
ErrorCount	Display	The total number of errors encountered in the last calculation.
ErrorXX	Display	If there are error messages associated with the last calculation, they will be displayed here.
ConvergenceError	Display	The largest numerical convergence error. This is often zero when the solution converges with no errors.