Template:Residence Time Data Section

From SysCAD Documentation
Jump to navigation Jump to search

|-

ResTime... Calc Tickbox Allows the user to specify the volume of the unit, from which a residence time can be calculated. |- | Volume || Input || Only visible if the Calc option has been enabled. The operating volume of the unit. This will be used to calculate the apparent residence time in the unit. This is based on the volumetric flow of all outlets from the unit. |- MassFlow / Qm Calc Only visible if the Calc option has been enabled. The mass flow of material from the unit. Temperature / T Calc Only visible if the Calc option has been enabled. The temperature of the material leaving the unit. |- | Slurry ||font style="background: #ebebeb"| Calc || Only visible if the Calc option has been enabled. The residence time of the slurry in the unit. |- | Total ||font style="background: #ebebeb"| Calc || Only visible if the Calc option has been enabled. The residence time for the slurry and the vapours in the unit. If there are any vapours leaving the unit, then this value will be smaller than the Slurry figure.

Retrieved from "https://help.syscad.net/index.php?title=Template:Residence_Time_Data_Section&oldid=55672"