Template:Pond Results Tab

From SysCAD Documentation
Jump to navigation Jump to search
Tag (Long/Short) Input / Calc Description/Calculated Variables / Options
Results Summary (Pond Contents)
Temperature / T Calc The current temperature of the contents of the pond.
Density / Rho Calc The current density of the contents of the pond.
TotalVol / Vt Calc The current volume of the contents of the pond.
Level / Lvl Calc The current level of the contents of the pond.
SolidFrac / Sf Calc The current fraction of solids in the contents of the pond.
TotalMass / Mt Calc The current mass of the contents of the pond.
InitTtlMass / InitMt Calc The mass of the contents of the pond at the start of the solver run.
DeltaTtlMass / DeltaMt Calc The total change in mass of the contents of the pond since the start of the solver run (TotalMass - InitTtlMass).
MassRateOfChange / QmAcc Calc The rate of accumulation of mass in the content of the pond.
MtAcc Calc The total change of mass over the time step.
Content.HeatFlow Calc
Results Summary (Bed Layer) (This section is only visible if BedLayer.Partition has been enabled.)
BedLayer.TotalMass / Mt Calc The current mass of the contents of the bed layer.
BedLayer.TotalVol / Vt Calc The current volume of the contents of the bed layer.
BedLayer.Level / Lvl Calc The current level of the bed layer.
BedLayer.SolidFrac / Sf Calc The current fraction of solids in the bed layer.
BedLayer.ContentFrac Calc The fraction by volume of the bed layer compared to the total volume of the contents of the pond (BedLayer.TotalVol / TotalVol).
BedLayer.HeatFlow Calc The current level of the bed layer.
Results Summary (CL) (This section is only visible if BedLayer.Partition has been enabled.)
CL.TotalMass / Mt Calc The current mass of the contents of the clarified liquor layer.
CL.TotalVol / Vt Calc The current volume of the contents of the clarified liquor layer.
CL.SolidFrac / Sf Calc The current fraction of solids in the clarified liquor layer.
CL.ContentFrac Calc The fraction by volume of the clarified liquor layer compared to the total volume of the contents of the pond (CL.TotalVol / TotalVol).
Results Summary (Evaporation)
Evap.MassFlow / Qm Calc The mass flow of water evaporated.
Evap.VolumeFlow / Qv Calc The volume flow of water evaporated.
Evap.Rate Calc The evaporation rate.
Evap.HeatFlow Calc The energy (heat) required for evaporation of water.
Results Summary (TCE) (This section is only visible if Rxns.Options = TCE.)
TCE.Mt Calc
TCE.HeatFlow Calc
Bypass.Mt Calc
Bypass.HeatFlow Calc
Results Summary (CRB) (This section is only visible if Rxns.Options = CRB.)
Rxns.Mt Calc
Rxns.HeatFlow Calc
Bypass.Mt Calc
Bypass.HeatFlow Calc
Results Summary (Streams)
Feed.MassFlow / Qm Calc The feed mass flow to the pond.
MassRateOfChange / QmAcc Calc The rate of accumulation of mass in the content of the pond.
CL.MassFlow / Qm Calc Visible if CL_Out stream is connected. The mass flow of the Clarified Liquor (CL_Out) stream.
Seepage.MassFlow / Qm Calc Visible if Seepage stream is connected. The mass flow of the Seepage stream.
Bed.MassFlow / Qm Calc Visible if Bed_Out stream is connected. The mass flow of the Bed outlet (Bed_Out) stream.
Overflow.MassFlow / Qm Calc The mass flow of the overflow stream.
Vent.MassFlow / Qm Calc The mass flow of the vent stream.
HeatFlows
Content.HeatFlow Calc
BedLayer.HeatFlow Calc Only visible if BedLayer.Partition has been enabled.
Evap.HeatFlow Calc The energy (heat) required for evaporation of water.
Bypass.HeatFlow Calc
TCE.HeatFlow Calc Only visible if Rxns.Options = TCE.
Rxns.HeatFlow Calc Only visible if Rxns.Options = CRB.
HeatFlow Calc The sum of all heat flows.