Template:Mass and Volume Content Data Section

|- | colspan="3" font style="background: #ebebeb" | Properties |- | colspan="3" font style="background: #ebebeb" | This section is shown in the Dynamic Tank model but not in the Multi-Storage model. |- | Temperature / T || Input / Display || This displays the temperature of the material contents. The user may also change the temperature here. |- | Pressure / P || font style="background: #ebebeb" | Display || The pressure of the material contents. |- | Level / Lvl || Input / Display || This displays the level of the material contents. The user may also set the level in the unit here. |- | HiLevelLimit / HiLmt || Input || The highest allowable level of the unit. If the solids and liquids level rises above this value, the unit will give a warning. The default value is 102%, so if the user does not change this value, it will never give a warning. |- | LoLevelLimit / LoLmt || Input || The lowest allowable level of the unit. If the solids and liquids level drops below this value, the unit will give a warning. The default value is 0%, so if the user does not change this value, it will never give a warning. |- | LevelHi / LvlHi || font style="background: #ebebeb" | Display || This is True (1) if the unit level is above the HiLevelLimit and False (0) otherwise. |- | LevelLo / LvlLo || font style="background: #ebebeb" | Display || This is True (1) if the unit level is below the LoLevelLimit and False (0) otherwise. |- | LimitAsStatus || TickBox || If this is disabled then the warning messages for High and Low limits will not be displayed. |- | colspan="3" font style="background: #ebebeb" | Mass |- | TotalMass / Mt || font style="background: #ebebeb" | Calc || The total mass of material in the unit. |- | SolidMass / SMt || font style="background: #ebebeb" | Calc || The mass of solids in the unit. |- | LiquidMass / LMt || font style="background: #ebebeb" | Calc || The mass of liquids in the unit. |- | VapourMass / VMt || font style="background: #ebebeb" | Calc || The mass of vapours in the unit. |- | SlurryMass / SLMt || font style="background: #ebebeb" | Calc || The mass of solids and liquids in the unit. |- | AqDissolvedMass / AqDissMt || font style="background: #ebebeb" | Calc || The mass of dissolved aqueous species in the unit. This will be the sum of all aqueous species excluding water. |- | AqueousMass / AqMt || font style="background: #ebebeb" | Calc || The mass of all aqueous species (including water) in the unit. |- | InitTtlMass / InitMt || font style="background: #ebebeb" | Calc || The mass in the unit at the start of the solver run. |- | DeltaTtlMass / DeltaMt || font style="background: #ebebeb" | Calc || The total change in mass in the unit from the start of the solver run. |- | colspan="3" font style="background: #ebebeb" | Volume |- | TotalVol / Vt || font style="background: #ebebeb" | Calc || The total volume of material in the unit. |- | SolidVol / SVt || font style="background: #ebebeb" | Calc || The volume of solids in the unit. |- | LiquidVol / LVt || font style="background: #ebebeb" | Calc || The volume of liquids in the unit. |- | VapourVol / VVt || font style="background: #ebebeb" | Calc || The volume of vapours in the unit. |- | SlurryVol / SLVt || font style="background: #ebebeb" | Calc || The volume of slurry (solids and liquids) in the unit. |- | colspan="3" font style="background: #ebebeb" | Normal Volume |- | TotalNormVol / NVt || font style="background: #ebebeb" | Calc || The total volume of material in the unit at normal conditions. |- | SolidNormVol / SNVt || font style="background: #ebebeb" | Calc || The volume of solids in the unit at normal conditions. |- | LiquidNormVol / LNVt || font style="background: #ebebeb" | Calc || The volume of liquids in the unit at normal conditions. |- | VapourNormVol / VNVt || font style="background: #ebebeb" | Calc || The volume of vapours in the unit at normal conditions. |- | SlurryNormVol / SLNVt || font style="background: #ebebeb" | Calc || The volume of slurry in the unit at normal conditions.