Search results

the General Separator is unimportant. The user may connect the streams to any position on the unit. If the user disables the unit, by un-ticking the On tick

double p, double *x) { return (1. - x[0] + 0.05 * x[1] * x[0] + 0.01*x[2]) * pow(T - 273.15, 0.03) * pow(p / 101.325, 1.17); } } The function should be

The user may specify reactions in most units within SysCAD using the Reaction Block. The user defines chemical reactions in a text file. The user may use

values BETWEEN 1 and 10 kg/h. Real RequiredFlow*("Qm", "kg/h")<1, 10> ;The input variable RequiredFlow will be restricted to values ABOVE 1 kg/h. There is

the oversize is given in equation (1): (1) [math]\displaystyle{ \mathbf{\mathit{E_{o a i}=\cfrac{exp(\alpha x_i)-1}{exp(\alpha x_i)+exp(\alpha)-2}}} }[/math]

BaseFilesUser\Symbols folder. The purpose of the ..SysCADxxx\BaseFilesUser\Symbols folder is for user defined symbols. For example, if the user creates

a dynamic matrix and manipulate its elements. The user may read in a matrix from a text file. The user may set constant values into a matrix when it is

may contain user defined individual phases. However, the phase description must match what has been defined in the species database. User must check the

[math]\displaystyle{ \frac{D_{j+1}}{d_j}\gt 1 }[/math] will force the cumulative function to be greater than 1 (and thus set to 1 for breakage to the same bin)

[math]\displaystyle{ U1 }[/math] [math]\displaystyle{ U2 = U1^2 \left(1 + CV^2\right) }[/math] [math]\displaystyle{ U3 = U1^3 \left(1 + 3 CV^2\right) }[/math]

compounds would act in the same way. This should be reviewed based on real test data. Reagent concentrations, ratios and excesses were often assumed and

0 Date = 1 Time = 1 ElapsedHMS = 0 ElapsedDbl = s Command = 0 Type = 1 Tag = 1 Source = 1 IDNo = 0 IterNo = 0 CallNo = 0 SeqNo = 0 Message = 1 ;=======

Navigation: User Guide ➔ Menu Commands ➔ View ➔ Solver Settings ➔ Tears Related Links: Tear, Convergence Methods, Tolerance Testing The Tears Summary lists

similar to the Thickener and other Mass Separation Models. For all methods, the user may select any number of species to bypass this logic and directly send a

SysCAD 9.1 Build 127 was first released January 2009 and is the last release of SysCAD 9.1. Build 120 was first version of SysCAD 9.1. SysCAD 9.1 is a discontinued

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ User Property Expressions NOTES: Function SumPhase() has

stand-alone unit; or as part of a Flash Train. The user sets the operational mode of the Evaporator. However, if the user sets the mode as Flash Train and the Evaporator

SysCAD it is recommended that a user upgrades projects in a step wise fashion. For example, if the user currently has SysCAD 9.1 project, then it is advisable

was enabled in SysCAD 9.1, then the user must enable the new tag in SysCAD 9.2. For a reaction acting in reverse where the user specified a Heat of Reaction

[Concatenate(OreTag1, ".BRK[1][", IntToStr(n), "] (%)")] = 0 [Concatenate(OreTag1, ".BRK[0][", IntToStr(n), "] (%)")] = 0 k = k - 1 EndWhile n = n - 1 endwhile EndSub