Template:Sz Tab Page Data Section

From SysCAD Documentation
Jump to navigation Jump to search
Tag (Long/Short) Calc / Option Descriptions
Sz...
SpeciesX.Qm Calc Each species selected to contain size data will be listed here, showing the mass flow for that species.

NOTES:

  1. The mass flow of the "default solid" = "mass flow of the default solid" + "mass flow of all non-PSD solids"
  2. the default solid is assigned in the Size Configuration and shown in Plant Model - Qualities - DefaultSp
Zeros Hide Zeros.png
Show Zeros.png		 Toggles between show / hide zero. Only applies to the SpeciesX.Qm section above.
The size distribution table displays the parameters described below for each solid with a specified size distribution.
  1. If you have 2 (or more) solids, and each has been specified with a size distribution, then you can choose to see values for each of these ores.
  2. All non-PSD solids will follow the Default Solid.
  3. Use the View Column button on the bottom of the tab page to add / remove a variable from display.
  4. Not all variables listed below are available from the View Column button by default. The optional variables are selected from the Plant Model - Qualities tab.
Size Intervals TopSize / MidSize The size displayed will be the "topsize" or "midsize" of the size interval. SysCAD calculates the MidSize for each size interval using the Geometric Mean. See Sz Data Sections for more information.
FP: Fraction passing of the solids - this is the fraction of solids in a size interval.
FPCum: Cumulative Fraction passing of the solids, summing from the smallest size fraction to the largest.
Qm Mass flowrate of the solid within the size interval
QmCum Cumulative Mass flowrate of the solids, summing from the smallest size fraction to the largest.
SpN: Optional view. Number of Particles per unit mass of solids.
SpNCum: Optional view. Cumulative Number of Particles per unit mass of solids, summing from the smallest size fraction to the largest.
NFp: Optional view. Number of Particles for the size interval as a percentage of the total number of particles.
NFpCum: Optional view. Cumulative Number of Particles for the size interval as a percentage of the total number of particles, summing from the smallest size fraction to the largest.
Qn Optional view. Number of Particles per unit time within the size interval.
QnCum Optional view. Cumulative Number of Particles per unit time within the size interval, summing from the smallest size fraction to the largest.
Distribution Display List Shows the size distribution being used.
Global SzDist (PSD) View Options
Intervals Sz Ascending button.png
Sz Descending button.png		 Clicking on this button will toggle between displaying the size intervals in Ascending or Descending order.
Interval Display Sz Topsize button.png
Sz Midsize button.png		 Clicking on this button will toggle between displaying the size intervals as TopSize or MidSize.
CumulativeDisplay Sz OneTable button.png
Sz SeparateTable button.png		 Only visible if the project contains one PSD solid. In the Separate Table mode, the cumulative values are displayed as a separate table. The Separate Table mode will always be used when two or more PSD solids are used.
ViewColumns Sz ViewColumns button.png
with popup selection		 Clicking on this button will show a popup list containing all available variables for the size distribution table. Please note that if the project contains many PSD solids, then this list can become very long. To shorten the list, please only select the required display option from the Plant Model - Qualities tab.
View Options PlantModel.PSD clicking on the magnifying glass icon to the right of this will jump to the Plant Model - Qualities tab.

Please see Sz Data Sections for more information and explanation of the above fields.

Retrieved from "https://help.syscad.net/index.php?title=Template:Sz_Tab_Page_Data_Section&oldid=56926"