Material Content Section - PropGroup4

Navigation: Models ➔ Common Sections ➔ Material Content Section ➔ Solution Impurities, H2O Properties

Material (Content)	Content Tab Include Properties						Species (Sp)	Optional Tabs
Basic Information	Energy ValuesAtUserTandP	Density Correction Solubility Saturation	Acidity Charge Transport	HeatsOfCombustion Heating Values	Solution Impurity H2O Properties	Water Quality	Sp Tab EC Tab	DLockup LockUp	DTrack Track	DSz Sz MSz	DSSA SSA

Related Links: Common Content Section

---

This section is used to display the included properties for: Solution Impurities, H2O Properties.

Data Section

Tag (Long/Short)	Input / Calc	Description/Calculated Variables / Options
Solution Impurities This section will show impurity values. Most of these fields will only be shown if the user has chosen to display the SolutionImpurities in the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material Content section.
Solution Impurities
WaterMass / WaterMt	Calc	The mass of pure water (H2O(l)) in the content.
LiquidMass / LMt	Calc	The mass of liquids in the content.
AqueousMass / AqMt	Calc	The mass of aqueous species (including H2O(l)) in the content.
SlurryVol / SLMt	Calc	The volume of slurry (liquids + solids) in the content.
TotalSuspendedSolids / TSS	Calc	The Total Suspended Solids (TSS) is the sum of all solids species, reported as a slurry (liquids + solids) concentration.
Liquid Impurity
Liquid.Impurity.Mass / Liq.Imp.Mt	Calc	The mass of all liquid species excluding water, in the content.
Liquid.Impurity.Frac / Liq.Imp.Frac	Calc	The mass fraction of all liquid species excluding water, in the content.
TotalDissolvedSolids / TDS	Calc	The Total Dissolved Solids (TDS) is the sum of all liquid species (not including water), reported as a liquid concentration.
Total.Impurity.Mass / Total.Imp.SLMt	Calc	The mass of all solid and liquid species excluding water, in the content.
Total.Impurity.Frac / Total.Imp.Frac	Calc	The mass fraction of all solid and liquid species excluding water, in the content.
Total.Impurity.Conc / Total.Imp.Conc	Calc	The sum of all solid and liquid species excluding water, reported as a slurry (liquids + solids) concentration.
Impurity Breakdown
AqImpurity.Mass / AqImp.Mt	Calc	The mass of all aqueous species excluding water, in the content.
AqImpurity.Frac / AqImp.Frac	Calc	The mass fraction of all aqueous species excluding water, in the content.
AqImpurity.Conc / AqImp.Conc	Calc	The sum of all aqueous species excluding water, reported as a liquid concentration.
H2O Properties This section will show water/steam entropy values. These will only be shown if the user has chosen to display the H2OProperties in the Plant Model - Views tab page or from the Include Properties dropdown list on the first page of the material Content section. NOTES: If the project is using IF97 for the properties of steam and water then: The enthalpies will only be slightly different to the IF97 values shown here due to the slightly different reference temperature (0°C vs 0.01°C). The entropies will be different to the IF97 values by a fixed amount due to the different reference temperatures (0 Kelvin vs 0.01°C). The densities will be the same. In region 5 (steam > 1073K), the IF97 values will be calculated using the IF97_2 equations (refer to Water and Steam Properties for more information.
H2OProps (Water and Steam Properties) ...
Water.VapourT@P	Calc	Water vapour temperature (boiling point/saturation temperature) at the content pressure.
Water.State	Calc	SysCAD checks the stream properties with the steam tables and displays if under the content temperature and pressure, would all the H2O be liquid (water). If yes, it will display OK, if not it will display Invalid.
Water.Enthalpy / H	Calc	Water enthalpy (based on reference point of 0°C).
Water.IF97.Enthalpy / H	Calc	Water enthalpy calculated from IF97 (based on reference point of triple point of water (0.01°C)).
Water.Entropy / S	Calc	Water entropy (based on reference point of absolute zero (0K)).
Water.IF97.Entropy / S	Calc	Water entropy calculated from IF97 (based on reference point of triple point of water (0.01°C)).
Water.Density / Rho	Calc	Water density.
Water.IF97.Density / Rho	Calc	Water density calculated from IF97.
Steam.State	Calc	SysCAD checks the content properties with the steam tables and displays: If under the current content temperature and pressure, would all the H2O be vapour (steam). If yes, it will display OK, if not it will display Invalid.
Steam.Enthalpy / H	Calc	Steam enthalpy (based on reference point of 0°C).
Steam.IF97.Enthalpy / H	Calc	Steam enthalpy calculated from IF97 (based on reference point of triple point of water (0.01°C)).
Steam.Entropy / S	Calc	Steam entropy (based on reference point of absolute zero (0K)).
Steam.IF97.Entropy / S	Calc	Steam entropy calculated from IF97 (based on reference point of triple point of water (0.01°C)).
Steam.Density / Rho	Calc	Steam density.
Steam.IF97.Density / Rho	Calc	Steam density calculated from IF97.