The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| Tag (Long/Short) |
Input / Calc |
Description/Calculated Variables / Options
|
| Material Tracking Set Options
|
| SetMethod |
None (Hide) |
This method is only available if 'Modify' is chosen on the Qi or Content page. This will hide the configurable fields.
|
| Single Material |
This method is used if all species are the same material. Select the Material from the drop down list.
|
| Material Fractions |
This method is used if all species have the same mix of materials. Enter the fractions for each material. The fractions must add to 1. If the specified percentages add to less than 1 then the leftover is assumed to be 'Other' material. When 'Modify' is being used, a '*' may be entered to allow the feed fraction to be used (i.e. not modified).
|
| All Fractions |
This method allows each species with material tracking to have a different mix of materials. As with the Material Fractions method, the user must enter the fractions for each material, but now for each species with material tracking in a table. The fractions for each species must add to 1. If the specified fractions add to less than 1 then the leftover is assumed to be 'Other' material. When 'Modify' is being used, a '*' may be entered to allow the feed fraction to be used (i.e. not modified).
|
| Redistribute Other (All) |
This method is only available if 'Modify' is chosen on the Qi or Content page. This will redistribute the fraction of 'Other' material to the other fractions in line with their current fractions for all species.
|
| Redistribute Other |
This method is only available if 'Modify' is chosen on the Qi or Content page. For each species selected, the fraction of 'Other' material will be redistributed to the other fractions in line with their current fractions. For example, if a species had 50% Red, 25% Green and 40% Other, this will be changed to 67% Red, 33% Green and 0% Other. If the species is 100% Other, then this will remain as Other.
|
| SetWhen |
This method is only available if 'Modify' is chosen on the Qi or Content page, or if 'Modify Content' is chosen on the Content page of a surge unit.
|
| Off |
This option allows the user to keep their configuration while not actually modifying the quality.
|
| AtStart |
This option is only available if 'Modify Content' is chosen. The modify will only be applied at the start of a run.
|
| Always |
The modify will always be applied.
|
| SetNow |
Button |
This button is only available if 'Modify Content' is chosen. This allows the Modify to be applied when pressed manually or when set via a General Controller (PGM).
|
| Material |
List |
Only visible if SetMethod 'Single Material' is chosen. A list of all Materials as defined on the Plant Model - Qualities Tab.
|
| Mat001.Rqd |
Input |
Only visible if SetMethod 'Material Fractions' is chosen. The required fraction of this material. There will be one of these fields for each material as defined on the Plant Model - Qualities Tab.
|
| Other.Rqd |
Calc |
Only visible if SetMethod 'Material Fractions' is chosen. The fraction which is assumed to be 'Other' material. This will be 1-(sum of all defined material required fractions).
|
| SpecieName |
Tickbox |
Only visible if SetMethod 'Redistribute Other' is chosen. This option determines whether the 'Other' material will be redistributed to the other materials for this species. There will be one of these fields for each species for which material tracking is enabled on the Plant Model - Qualities Tab.
|
| AllowDirectSet |
Tickbox |
This allows the fractions on the Track tab page to be directly set for all species, similar to the way the mass of the contents may be directly changed on the 'M' (Mass) content tab page.
|