Stream Results

From SysCAD Documentation
Jump to: navigation, search

This submodel calculates and summarizes key results for streams containing PSD information. Models that display Stream Results include:

Tag / Symbol

Input / Calc

Description/Calculated Variables / Options

(The following fields are the rows of a multi column table. The first columns will be for the Feed to the model and subsequent columns are the products. For a crusher, there will be a single product, while for screens and cyclones there will be multiple products, for example underflow/overflow or passing/retained. Specific models may not display all these results.

Mass Flow / Qm Calc The total mass flow of material.
SolidMassFlow / SQm Calc The mass flow of solid material.
LiquidMassFlow / LQm Calc The mass flow of liquid material.
VolFlow / Qv Calc The total volumetric flow of material.
Temperature / T Calc The temperature of the material.
Density / Rho Calc The density of the material.
SolidFrac / Sf Calc The fraction of the material that are solids.
LiquidFrac / Lf Calc The fraction of the material that are liquids.
Passing Calc The fraction of material which passes (is less than) the size defined below in the Options section. The size currently used will be shown as a comment on the right hand side of the value.
Passes Calc The size of material that corresponds to the percent passing defined below in the Options section. The fraction currently used will be shown as a comment on the right hand side of the value.

Options

SizeForPassingFracCalc Input The particle size to be used for the percent 'Passing' display in the SysCAD Stream Results Table.
NOTE: This is a global parameter that will affect the display in all Limn Crusher, Limn Mill and Screen 2 models in the project.
FracForPassesSizeCalc Input The fraction percent passing to be used for the 'Passes' display in the SysCAD Stream Results Table.
NOTE: This is a global parameter that will affect the display in all Limn Crusher, Limn Mill and Screen 2 models in the project.