Display Graphics Commands

Navigation: User Guide ➔ Menu Commands ➔ Graphics ➔ Display

Insert	Edit	Delete	Copy & Paste	Display	Animation	Symbol Management	Construct

Latest SysCAD Version: 19 March 2024 - SysCAD 9.3 Build 139.35102

---

Note: These commands only affect the currently selected Graphics window.

Display

Display of Unit or Link Tags

Unit Tags

• Show all Unit tags: This command will display the Tags of ALL units on the selected Graphics flowsheet.
• Hide all Unit tags: This command will hide the Tags of ALL units on the selected Graphics flowsheet.
• Size all Unit tags: This command will change the size of the Tags of ALL units on the selected Graphics flowsheet to the size specified on the Graphics page of General Options (Menu command: Tools - general Options).

Link Tags

• Show all Link tags: This command will display the Tags of all Links on the selected Graphics flowsheet.
• Hide all Link tags: This command will hide the Tags of all Links on the selected Graphics flowsheet.
• Size all Link tags: This command will change the size of the Tags of all Links on the selected Graphics flowsheet to the size specified on the Graphics page of General Options (Menu command: Tools - general Options).

Link Breaks and Arrows

• No Breaks at Link Intercepts: All link breaks where lines cross one another will be removed.
• Horizontal Breaks at Link Intercepts: All Horizontal links will be broken where they cross vertical lines. Any breaks in vertical lines will be removed.
• Vertical Breaks at Link Intercepts: All Vertical links will be broken where they cross horizontal lines. Any breaks in horizontal lines will be removed.
• Apply Arrow style for Links: The default arrow style for links will be applied to all links on the graphics page. Please see General Options - Drawing for more information on where to set the default arrow style.

See also Link Intercept Methods

Update Associated Graphics

User can choose to update all or selected associated graphics as required. The options include Tears: For all links that have an associated Pipe-Tear for recycles, recreate the graphics symbol (">>" chevron symbol) on the link line for the tear. This is useful to tidy up the drawing after links have been moved and redrawn, but the Tear symbol position is incorrect. Makeups: To update the direct link positions auto generated via makeup blocks, useful after graphics copy and paste, where the direct links maybe out of position. Discards: To update the direct link positions auto generated via discard blocks, useful after graphics copy and paste, where the direct links maybe out of position. SrcLnks: To update the direct link positions auto generated when feeder is set to "link to MakeupSource" operation mode, useful after graphics copy and paste, where the direct links maybe out of position. Spills: To update the direct link positions auto generated for spills in Dynamic solve mode. Vents: To update the direct link positions auto generated for vents with no physical connections in Dynamic solve mode.

Zoom

Using the Mouse Wheel

Please also see ETip: Flowsheet Navigation using Mouse Control.

The Zoom and Pan mouse wheel action will depend on the settings on the Options - General - Mouse Tab, below are explanations for the default settings only:

Pan:

• The default mouse wheel action is set to Scroll the window vertically, so rolling the mouse wheel will pan the page up/down.
• To pan around the graphics window, hold down the Mouse wheel and drag the graphics in the required direction.

Zoom:

The user may use + Mouse wheel to zoom in or out the Graphics window.

While the Graphics window is active:

• Hold 'Ctrl' key down and roll the Mouse wheel towards you to Zoom OUT (decrease magnification) at the cursor position.
• Hold 'Ctrl' key down and roll the Mouse wheel away from you to Zoom IN (increase magnification) at the cursor position.
• Roll the Mouse wheel while holding 'Ctrl' and 'Shift' key for Zoom IN /OUT at the window centre (i.e. ignore cursor position).
• Single click on the mouse wheel button while holding 'Ctrl' to zoom back out to view the full graphics page (same as the zoom all command)

NOTES:

1. While zoom is active, the mouse cursor changes. You can even zoom in/out and pan with the mouse wheel while busy with some graphics commands such as inserting units.
2. To change the Mouse wheel action, please see General Options - Mouse

Using Commands

Command Button
Command Path	Graphics - Zoom
Short Cut Key	Ctrl+M

This command is used to move around and change the magnification of the active Graphics Window. The zoom command opens a floating toolbar:

• Clicking closes the toolbar.
• The next four buttons allow you to move around the Graphics Window, left, right, up or down respectively. The magnification of the drawing is not changed.
• The next two buttons increase (zoom in) or decrease (zoom out) your view of the drawing.
• The All icon zooms to fit the drawing on the Graphics Window.
• To view a portion of the drawing, with the zoom toolbar opened, drag a selection box on the Graphics Window with the left mouse button. To return to the overall drawing, either click on the All icon, or click once on the Graphics Window.