Tutorial Overview

From SysCAD Documentation
Jump to navigation Jump to search

Navigation: User Guide ➔ Getting Started ➔ Tutorial

Getting Started and Installation Training Tutorial Guidelines and Examples
Getting Started Download
Training Information Training Preparation Tutorial Overview Tutorial Videos Modelling
Example Projects Example Reports Example PGM Files FAQ

Latest SysCAD Version: 12 January 2022 - SysCAD 9.3 Build 139.30140


To help new SysCAD users, a number of Tutorial documents and example projects are available to demonstrate the many features and functionality in the SysCAD software. Ideally, new users should attend a SysCAD training course.

This section outlines the Tutorial documentation and Projects distributed with SysCAD.

Basic Tutorial

As part of the SysCAD install, some tutorial files are distributed to help users get started with creating their first simple SysCAD project.

These files are available to all SysCAD users, they can be found under the SysCADxxx\Tutorial folder which include:

  1. SysCADGettingStarted.pdf - gives a brief introduction on how to obtain a license, and how open and run an existing SysCAD project.
  2. SysCADBasicTutorial.pdf - a step-by-step guide to assist the user when learning to build a SysCAD project. This is also a useful reference document for all SysCAD users. See Tutorial Documentation for the course outline.
  3. SysCADQuickReference.pdf - a quick reference guide for the commonly used SysCAD commands. We recommend printing this file for easy reference.
  4. Distributed Tutorial Projects - Many SysCAD tutorial projects are included in the Tutorial Folder. They are either pre-drawn or saved at the end of each tutorial section. The user may use these to check their projects at the end of each section, if required.

Tutorial Documentation

The SysCADBasicTutorial document covers some basic functions and features of SysCAD in a step-by-step manner.

Topics covered in this document include:

  1. The basic Commands required in building a SysCAD project.
  2. Entering Data into the SysCAD Model.
  3. Editing the SysCAD Species Database and Configuration file.
  4. Adding Reactions.
  5. Adding different types of control.
  6. Merge two existing projects.
  7. Connect flows between flowsheets.
  8. Introduction to some advanced features.
  9. Create and edit reports.


  1. The document SysCADBasicTutorial.pdf is updated from time to time to include the most up to date features. Please check SysCAD Downloads for any new release of software or document updates.
  2. For Build 137 this document is also available in Spanish upon request. (Thanks to Promet101 for the Spanish Translation.)

Tutorial Videos

Some Tutorial Videos are available here. The user can refer to these for quick demonstrations of selected SysCAD features/functions.

Please note that these videos supplement the SysCADBasicTutorial.pdf, but not all topics covered in the tutorial document contain supplementary video files.

Supplementary Tutorial Documentation

Other Tutorial Documentation files are available for further training. These files are not available to all users, they are normally used as part of the formal training or can be downloaded by SysCAD users with current maintenance contract from SysCAD Downloads.

The Supplementary Tutorial Documents are:

  1. SysCAD Supplementary Tutorial - Additional Features
  2. SysCAD Supplementary Tutorial - Additional Modelling Topics
  3. SysCAD Supplementary Tutorial - FEM Tutorial
  4. SysCAD Supplementary Tutorial - OLI Introduction
  5. SysCAD Supplementary Tutorial - ChemApp Introduction
  6. SysCAD Supplementary Tutorial - PHREEQC Introduction
  7. SysCAD Supplementary Tutorial - AQSol Introduction

Additional Features

Topics covered in this document include:

  1. Standard Species Model & Energy Balance;
  2. Density Correction, Heat of Dilution, Solubility and Boiling Point Elevation;
  3. Introduction to industry related Species Models such as Alumina, Potash and Sugar;
  4. Save and Compare Scenarios;
  5. Adding Annotation (data tables) to the flowsheet;
  6. Creating New Graphics Symbol.

Additional Modelling Topics

Topics covered in this document include:

  1. Using sub models in the unit operation. This includes Makeup control, heat loss, evaporation, vapour liquid equilibrium, mass distribution, energy distribution and pressure drop;
  2. Setting up Demand requirements;
  3. Deactivating and activating selected flowsheets;
  4. Using Composition Fetch to set up Feeders, Makeup Sources or increase the convergence speed of large networks;
  5. Adding user defined property calculations or species information calculations;
  6. Adding calculations using PGM or MP files;
  7. Flash Trains;
  8. Size Distribution;
  9. Using Ionic Species;
  10. Using Multi-stage Counter flow tie to model columns and dryers.

FEM Tutorial

Topics covered in this document relate to using the Gibbs Free Energy Minimisation Reactor model in SysCAD and include:

  1. How to set up the FEM reactor involving single or multiple reactions;
  2. Using the FEM reactor to find Vapour Equilibrium, Adiabatic Flame Temperature;
  3. Using the FEM reactor to simulate a blast furnace - introduction to pyrometallurgy.
  4. Using the FEM reactor for aquatic chemistry, eg prediction of pH

OLI Introduction

Topics covered in this document include:

  1. How to export the OLI Studio Chemistry Model data for external use (SysCAD).
  2. How to map species between OLI and SysCAD
  3. How to set up SysCAD to perform standalone OLI stream analysis calculation.
  4. How to include OLI calculation in the SysCAD flowsheet.

Dynamic Tutorial

Topics covered in this tutorial:

  1. How to set up a dynamic project
    • Model Configuration
    • Adding Level Control
    • Adding Initial contents to tanks
    • Adding variable feed using profiles and noise
    • Adding an event
    • How to handle recycles
    • Adding Batch ouput
    • Adding Layer Tanks
  2. How to collect and report data
    • How to set up the archiver to collect data
    • How to set up statistical models
  3. How to add simple fill and toggle animation
  4. Introduction to setting up a Material Handling Project
  5. Introduction to setting up a Flash Train Project
  6. Introduction to setting up a Precipitation project (Alumina Only)

Formal Training Course

KWA Kenwalt Australia does offer formal training courses on an as needed basis. Please refer to Training for more information.

SysCAD Modelling Guideline and Check List

Please see SysCAD Modelling Guideline and Check List for information.

Example Projects

A number of example projects are included as part of the install, these example projects will demonstrate certain features or functionality of SysCAD.

For more information on the distributed example projects, please see Example Projects for project descriptions.