Template:Belt Drive - Speed

From SysCAD Documentation
Jump to navigation Jump to search

|- | valign="top" rowspan="4"| Type || Power & Speed || If the power source is available the conveyor will run at the user specified speed. |- || Fwd Rev || The user may specify if the conveyor is running forwards or in reverse. |- || Soft Start || The user may specify the time taken to start the conveyor after it has received a run signal. |- || Soft Start/Stop || The user may specify the time taken to start the conveyor after it has received a run signal and the time for it to come to a complete stop once it has received a stop signal. |- | valign="top" rowspan="3"| Mode || Simple ||   |- || Command (Latch) ||   |- || Command (State) ||   |- | valign="top" rowspan="3"| FwdRevMode || FwdOnly || This field is only visible if the Soft Start/Stop Type is chosen. |- || Logic ||   |- || Regulation ||   |- | Run/State/Enable/Permissive || valign="top" | Tick Box || valign="top" | The conveyor Belt is run enabled. The field name used will depend on the Type and Mode chosen. |- | Invert || Tick Box || This field is only visible if the Simple Mode is selected. It is not available for Type = Power & Speed. It inverts the direction of the belt. |- | Start || Tick Box || This field is only available if Command(Latch/State) Mode is selected. |- | Stop || Tick Box || This option is only available if Command(Latch/State) Mode is selected. |- | StartInvert || Tick Box || This option is only available if Command(Latch/State) Mode is selected. |- | StopInvert || Tick Box || This option is only available if Command(Latch/State) Mode is selected. |- | Reverse || Tick Box || This field is only available for the Soft Start/Stop Type conveyor with the Logic FwdRevMode. This reverses the direction of travel of the conveyor belt. |- | Running || font style="background: #ebebeb"|Tick Box || This displays the state of the conveyor belt. |- | Tripped || Tick Box || This allows the user to emulate the tripping of the conveyor belt for logic testing. |- | StartTime || Input || This field is only available for the Soft Start and Soft Start/Stop Type conveyors. It is time taken for the conveyor to go from 0 to 100% speed. |- | StopTime || Input || This field is only available for the Soft Start/Stop Type conveyor. It is the time taken for the conveyor to go from 100 to % speed. |- | Forward || Tick Box || This field is only visible for Type = Fwd Rev. If this box is ticked then the conveyor will run in a forward direction. |- | Manual || Input || The user may manually override the speed of the conveyor. |- | Required / Reqd || Input || The required speed of the conveyor belt. |- | Actual ||font style="background: #ebebeb"| Calc || The actual speed of the conveyor belt. |- | Regulated ||font style="background: #ebebeb"| Display || |- | MapLo || Input || This field is only visible for the Soft Start or Soft Start/Stop Type conveyor. |- | MapHi || Input || This field is only visible for the Soft Start or Soft Start/Stop Type conveyor. |- | MapSpeed ||font style="background: #ebebeb"| Calc || This field is only visible for the Soft Start/Stop Type conveyor. |- | LoSpeed ||font style="background: #ebebeb"| Calc || Belt is running on low speed. True if speed < LoSpeedLimit |- | HiSpeed ||font style="background: #ebebeb"| Calc || Belt is running on high speed. True if speed > HiSpeedLimit |- | LoSpeedLimit || Input || Low speed limit for the conveyor belt. |- | HiSpeedLimit || Input || High speed limit for the conveyor belt. |- | AutoReStart || Tick box || Auto restarts the belt. |- | valign="top" rowspan="4"| FailMode|| None || There is no user specified behaviour after a fail event. |- | No Start || The conveyor will not start. |- | No Stop || The conveyor will not stop. |- | No Start/Stop || The state of the conveyor cannot be changed. |- | RunMemory || Tick box || Enable this to let the unit keep track of running status.