Plant Model - States - Full Detail

From SysCAD Documentation
Jump to navigation Jump to search

Navigation: User Guide ➔ View ➔ Plant Model ➔ States ➔ Full Detail

FlwSolve Tab Settings Tab Audit Tab Project Tab RC Tab Species Tab Views Tab Soluble Tab WaterQuality Tab Qualities Tab
Environment Tab System Tab ModelList Tab Flowsheets Tab PrjNetworks Tab Status Tab Statistics Tab States Tab EvalSeq Tab Globals Tab

Related Links: Plant Model - States

Introduction

This page describes the extension of the States tab page which gives more detailed information on the time that the solver spends in different sub-states while solving or paused. It only appears if the AppState.Solve.ShowBreakdown option on the States tab page has been enabled, which is only available in Build 137 or later.

Tag (Long/Short) ID Description
AppState Display Options
AppState.ClearTimers Button Reset the application state timers.
AppState.Solve.ShowBreakdown Tickbox Displays more detailed information (Full Detail), on a new tab page immediately after the States tab page.
AppState.FullDetail...
Breakdown of Elapsed Time spent within various Solve States during the current RUN
For each row (sub-state) in the table below, the following items (where relevant) are displayed:
  • Count (Run.Count) - the number of times/iterations/steps the solver has been in this sub-state in the current run
  • Run (Run.Time) - the time the solver spent in this sub-state in the current run
  • Iter (Each.Time) - only shown in steady-state projects, the time the solver spent in this sub-state in the previous iteration
  • Step (Each.Time) - only shown in dynamic projects, the time the solver spent in this sub-state in the previous step
  • Average (Each.Avg) - the average time the solver spent in this sub-state per iteration/step (Run.Time/Run.Count)
  • Run (Run.Frac) - the fraction of the total solving time spent in this sub-state (X.Run.Time/Total.Run.Time)
  • Iter (Each.Frac) - only shown in steady-state projects, the fraction of the total iteration time spent in this sub-state (X.Each.Time/Total.Each.Time)
  • Step (Each.Frac) - only shown in dynamic projects, the fraction of the total step time spent in this sub-state (X.Each.Time/Total.Each.Time)
Solve Detail
Start (A1) Application sub-state Start.
Start.Init (A2) Application sub-state Start.Init.
Start.Query (A3) Application sub-state Start.Query.
Start.BuildIO (A4) Application sub-state Start.BuildIO.
Start.ReadAll (A5) Application sub-state Start.ReadAll.
Start.WriteAll (A6) Application sub-state Start.WriteAll.
Start.Read (A7) Application sub-state Start.Read.
Start.Write (A8) Application sub-state Start.Write.
Start.SubTotal (=Sum(A1:A8)) Sum of all Start sub-states.
Solve (B1) Application sub-state Solve.
Solve.BuildIO (B2) Application sub-state Solve.BuildIO.
Solve.ReadAll (B3) Application sub-state Solve.ReadAll.
Solve.WriteAll (B4) Application sub-state Solve.WriteAll.
Solve.Read (B5) Application sub-state Solve.Read.
Solve.Write (B6) Application sub-state Solve.Write.
Solve.Process (B7) Application sub-state Solve.Process.
Solve.Control (B8) Application sub-state Solve.Control.
Solve.Idle (B9) Only relevant for Real Time dynamic projects. Application sub-state Solve.Idle.
Solve.SubTotal (=Sum(B1:B9)) Sum of all Solve sub-states.
Stop (C1) Application sub-state Stop.
Stop.BuildIO (C2) Application sub-state Stop.BuildIO.
Stop.ReadAll (C3) Application sub-state Stop.ReadAll.
Stop.WriteAll (C4) Application sub-state Stop.WriteAll.
Stop.Read (C5) Application sub-state Stop.Read.
Stop.Write (C6) Application sub-state Stop.Write.
Stop.SubTotal (=Sum(C1:C6)) Sum of all Stop sub-states.
Total Sum of all sub-states.
Breakdown of Elapsed Time spent within various Paused States during the current RUN
For each row (sub-state) in the table below, the following items (where relevant) are displayed:
  • Count (Run.Count) - the number of times the solver has been in this sub-state in the current run
  • Run (Run.Time) - the time the solver spent in this sub-state in the current run
  • Iter (Each.Time) - only shown in steady-state projects, the time the solver spent in this sub-state in the previous iteration
  • Step (Each.Time) - only shown in dynamic projects, the time the solver spent in this sub-state in the previous step
  • Average (Each.Avg) - the average time the solver spent in this sub-state per iteration/step (Run.Time/Run.Count)
  • Run (Run.Frac) - the fraction of the total pause time spent in this sub-state (X.Run.Time/Total.Run.Time)
  • Iter (Each.Frac) - only shown in steady-state projects, the fraction of the total iteration time spent in this sub-state (X.Each.Time/Total.Each.Time)
  • Step (Each.Frac) - only shown in dynamic projects, the fraction of the total step time spent in this sub-state (X.Each.Time/Total.Each.Time)
Pause Detail
Paused (P1) Application sub-state Paused.
Paused.Test (P2) Application sub-state Paused.Test.
Paused.BuildIO (P3) Application sub-state Paused.BuildIO.
Paused.ReadAll (P4) Application sub-state Paused.ReadAll.
Paused.WriteAll (P5) Application sub-state Paused.WriteAll.
Paused.Read (P6) Application sub-state Paused.Read.
Paused.Write (P7) Application sub-state Paused.Write.
Total (=Sum(P1:P7)) Sum of all Paused sub-states.
Retrieved from "https://help.syscad.net/index.php?title=Plant_Model_-_States_-_Full_Detail&oldid=68683"