Direct Link Info Page

From SysCAD Documentation
Jump to navigation Jump to search

Navigation: Models ➔ Other General Models ➔ DirectLink ➔ Info


Tag(Long/Short) Input / Calc Calculated Variables / Options

Documentation

EquipDescription / EqpDesc Input The user may enter a unit description. This description will then be displayed in the 'GenDesc' field on the first tab page of the unit (see above).
EquipIdString / EqpIdStr Input The user may enter an equipment identifier that can be used for reporting.
EquipLocation / EqpLocation Input The user may enter an equipment location identifier that can be used for reporting.
ReportMe Tick Box The user may enter a report key - useful flag to exclude/include models or pipes in Excel TagSelect reports.
ReportKey Input The user may enter a report key number - this may be used to select user defined keys for reporting.
GeneralDescription / GenDesc Display This is an automatically generated description for the unit. If the user has entered text in the 'EqpDesc' field above, this will be displayed here. If this field is blank, then:
  • For pipes, SysCAD will use the text in the 'ConnectDesc' field - this displays the Source and Destination tags of the pipe;
  • For Feeders/Cross Page Connectors, SysCAD will display the state of the unit, i.e. if it is a Feeder or a Sink, etc.;
  • For other units SysCAD will display the unit class ID.

System Info

UnitType Output The unique Type of the model. This will be identical to the title of the first tab page. Useful for selecting types of units/pipes in Excel TagSelect reports.
UnitGroup Output A group that this UnitType belongs to - Unit, Control, Stream, OtherLink or Electrical. Useful for selecting groups of models in Excel TagSelect reports.
DllName Output Only available in Build 138 or later. Each SysCAD unit-model is stored and distributed in a "dynamic-link-library" (dll). The name of the dll where the unit-model is stored will be displayed here for user information.
SubTypeList Output Only available in Build 137 or later. List of all SubType sub models found in this model. There may be one or many of each SubType. These are primarily used in TagSelect for reporting and queries.
AddOnsReqdList Output Only available in Build 138 or later. Some SysCAD unit-models require specific add-ons to load the model. For example, the Flash Tank 2 unit-model requires the HeatBalance Addon to load. If user does not have the "HeatBalance" add-on license option, then the project will fail to load.
AddOnsUsedList Output Only available in Build 138 or later. Some SysCAD unit-models require specific add-ons to run the model. For example, the General Separator unit-model using Solids PSD Solids separation method requires the PSD Addon to run. If user does not have the "PSD" add-on license option, then the project will not solve using the PSD option.

Settings and Options

Active Display 1 = Active. 0 = Deactivated. This is normally set by SysCAD when the user Activates or Deactivates an entire flowsheet, see Active Pages and Manipulating Graphics and Trend Windows for methods of Activating and Deactivating flow sheets.