Constants

From SysCAD Documentation
Jump to navigation Jump to search

Navigation: User Guide ➔ Solver ➔ Constants

Project, Model and Solver Settings Simulation Modes and Solver Setup Solver Methodology, Convergence and Tolerance Solving Models
Project Settings Solver Settings Plant Model Constants Simulation Modes ProBal Setup Dynamic Setup Solver Status Solver Methodology Convergence Methods Tolerance Testing Evaluating Sub-Models Flash Train Mass&Energy Balance Referenced Variables Demand

Latest SysCAD Version: 03 May 2021 - SysCAD 9.3 Build 138.28537


Introduction

There are a number of constants used in SysCAD in calculations, models or the solver. Wherever possible the references used are obtained from NIST web site.

Conversions

For constants used in converting between different units of measurement see Conversion Factors. These factors are from NIST: Guide for the Use of the International System of Units (SI); NIST Special Publication 811 2008 Edition; Ambler Thompson and Barry N. Taylor).

Molecular Weights

The Standard Atomic Weights are used to define the molecular weight of species. Please see Species Definition.

For Build139: The Standard Atomic Weights for the following elements have been updated using latest information from the IUPAC website.

Al,As,Au,Be,Cd,Co,Cs,F,Ge,Hf,Hg,Ho,Mn,Mo,Nb,P,Pr,Rh,Sc,Se,Tb,Th,Tm,Y,Yb
References:
  1. Atomic weights of the elements 2013 (IUPAC Technical Report)
  2. Standard Atomic Weight Of Ytterbium Revised 2015
  3. Standard Atomic Weights Of 14 Chemical Elements Revised 2018
  4. Standard Atomic Weight Of Hafnium Revised 2019

For Build138: The Standard Atomic Weights are from NIST web site.

Reference: Standard Atomic Weights. Reference NIST Version 3.0 July 2010 (M.E. Weiser, M. Berglund, et al).

Other Constants

Some other constants used in SysCAD.

Constant Value Units Reference
Gravitational Constant 9.80665 m/s2 NIST
Universal Gas Constant 8.314472 J/mol K NIST
PI 3.14159265358979
Standard Temperature 25.0 °C
Standard Pressure 101.325 kPa

Use in PGM

Constants can be accessed directly in MP and PGM code. See Predefined Constants.

For molecular weights use PGM Species Database Class and MW() function.