Basic Tutorial - Makeup and Environmental Heat Exchange

From SysCAD Documentation
Jump to navigation Jump to search
THE VIDEOS HERE SUPPLEMENT THE SysCADBasicTutorial.pdf, LOCATED IN THE SysCADxxx\Tutorial FOLDER. REFER TO SysCADBasicTutorial FOR DETAILED INSTRUCTIONS.

Navigation: Main_Page -> Tutorial Videos -> Basic Tutorial - Makeup and Environmental Heat Exchange

Section 2
Creating a SysCAD Project
Section 3
Project Configuration and Species Database
Section 4
Access Window and Quick View
Section 5
Chemical Reactions
Section 6
Trend Windows, PID and Ratio Controllers
Section 7
Merging and Modifying Projects
Section 8
General Controllers
Section 9
Makeups and EHX
Section 10
Graphics Window and Bulk Tag Change
Section 11
Excel Reports and Quickview

Related Links: Makeup Source, Makeup Block, Environmental Heat Exchanger

Section 9 Overview

Please use these videos together with Section 9 of the Basic SysCAD Tutorial, which is distributed with the SysCAD full install.

We will continue to use the project that we have constructed and modified in the previous sections of the Tutorial.

In this section we will look at:

  1. How to insert and configure a Makeup Source with a 50% NaOH solution;
  2. Add and Configure a Makeup Block in a tank;
  3. Optional - Review results from the Makeup Block;
  4. Add an Environmental Heat Exchanger sub-model to a unit and set a Temperature drop of 1C.


Insert and Configure a Makeup Source

  • Section 9.2.1 and 9.2.2: Shows how to add and Configure a Makeup Source with a 50% NaOH solution.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.15600

Add and Configure a Makeup Block

  • Section 9.2.3: Shows how to add a Makeup Block to a tank and configure it to add a species as a molar ratio to a species in the tank feed stream.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.15600

Optional - Review results from Makeup Block

  • Section 9.2.4: Discusses the results of the Makeup Block added in the previous video.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.15600

Add a EHX with Temperature Drop

  • Section 9.3: Shows how to enable EHX in a unit and set a Temperature drop of 1C.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.15600