Basic Tutorial - Access Window and Quick View

From SysCAD Documentation
Jump to navigation Jump to search
THE VIDEOS HERE SUPPLEMENT THE SysCADBasicTutorial.pdf, LOCATED IN THE SysCADxxx\Tutorial FOLDER. REFER TO SysCADBasicTutorial FOR DETAILED INSTRUCTIONS.

Navigation: Main_Page -> Tutorial Videos -> Basic Tutorial - Access Window and Quick View

Section 2
Creating a SysCAD Project
Section 3
Project Configuration and Species Database
Section 4
Access Window and Quick View
Section 5
Chemical Reactions
Section 6
Trend Windows, PID and Ratio Controllers
Section 7
Merging and Modifying Projects
Section 8
General Controllers
Section 9
Makeups and EHX
Section 10
Graphics Window and Bulk Tag Change
Section 11
Excel Reports and Quickview

Section 4 Overview

Please use these videos together with Section 4 of the Basic SysCAD Tutorial, which is distributed with the SysCAD full install.

We will continue to use the project that we constructed in Section 2 - so please open that project.

The Leach flowsheet is shown below:

Leach Flowsheet.png

Configure the Autoclave

Set Pressure and enable Vapour Liquid Equilibrium (VLE)

  • Section 4.3: This example shows how to set up a Tank to operate at a required pressure, and also to enable Vapour Liquid Equilibrium.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 136.19154


Add a Gas Vent to a Unit

  • Section 4.3: Shows you how to enable the spitter sub-model in the Autoclave and to set up the splitter as a Gas vent.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 136.19154

Access Window Options

Access Window Button functionality

  • Section 4.4: Briefly describes some of the Access Window buttons functionality.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 136.19154

Access Window Species Tab Displays

  • Section 4.4: Briefly describes how to customise Species displays on the Species Tab of the Access Window.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 136.19154

Quick View Window

Display the Quick View

  • Section 4.5: Shows you how to display the Quick View for one or more Links or any SysCAD unit.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.13801

Edit Quick View

  • Section 4.5: Shows you how to change the Quick View using the Quick View Editor.
  • YouTube link (Allows you to watch in Full Screen mode)
  • Build 135.13801