Plant Model 9.3 - Status

From SysCAD Documentation
Jump to navigation Jump to search
Warning! Page you're reading is outdated or was archived and very likely is referring to older version of the software. Please navigate to the most recent version instead.

Navigation: View Commands Summary 9.3 -> Plant Model 9.3 -> Plant Model - Status

FlwSolve Tab Settings Tab Project Tab RC Tab Species Tab Views Tab Soluble Tab WaterQuality Tab
Qualities Tab Environment Tab System Tab Flowsheets Tab Status Tab Statistics Tab States Tab Globals Tab

This page is for SysCAD 9.3 Build 136 only. For SysCAD 9.3 Build 137 or later, please see Plant Model - Status.


Introduction

This tab page on the Plant Model Access Window displays the message window status as well as the Audit and Tear Maximum Errors.

Tag (Long/Short) Input / Calc Description / Calculated Variables / Options

Messages

Msgs...
Count Display Total number of messages displayed on the Message Window - Messages Section/Tab. Includes errors, warnings and notes.
Error.Count Display Total number of error messages displayed on the Message Window - Messages Section/Tab.
Warning.Count Display Total number of warning messages displayed on the Message Window - Messages Section/Tab.
Note.Count Display Total number of Information only messages displayed on the Message Window - Messages Section/Tab.

Conditions

Cnds...
Count Display Total number of messages displayed on the Message Window - Conditions Section/Tab. Includes errors, warnings and notes.
Error.Count Display Total number of error messages displayed on the Message Window - Conditions Section/Tab.
Warning.Count Display Total number of warning messages displayed on the Message Window - Conditions Section/Tab.
Note.Count Display Total number of Information only messages displayed on the Message Window - Conditions Section/Tab.

Ranges

Rngs...
Count Display Total number of messages displayed on the Message Window - Range Check Tab. Includes errors, warnings and notes.
Error.Count Display Total number of error messages displayed on the Message Window - Range Check Tab.
Warning.Count Display Total number of warning messages displayed on the Message Window - Range Check Tab.
Note.Count Display Total number of Information only messages displayed on the Message Window - Range Check Tab.

Audit & Tears

Audit...
MaxError.Qm.Tag Display Displays the SysCAD Stream that carries the maximum Mass Balance error - only works if Audit is switched on.
MaxError.Qm.Rel Display Displays the above stream's relative Mass Balance error - only works if Audit is switched on.
MaxError.Qm.Abs Display Displays the above stream's Absolute Mass Balance error - only works if Audit is switched on.
MaxError.Hf.Tag Display Displays the SysCAD Stream that carries the maximum Energy Flow Error - only works if Audit is switched on.
MaxError.Hf.Rel Display Displays the above stream's relative Heat Balance error - only works if Audit is switched on.
MaxError.Hf.Abs Display Displays the above stream's Absolute Heat Balance error - only works if Audit is switched on.
Tears...
MaxError.Qm.Tag Display Displays the Tear Stream that carries the maximum Mass Balance error
MaxError.Qm.Rel Display Displays the above stream's relative Mass Balance error
MaxError.Qm.Abs Display Displays the above stream's Absolute Mass Balance error
MaxError.Hf.Tag Display Displays the Tear Stream that carries the maximum Energy Flow Error
MaxError.Hf.Rel Display Displays the above stream's relative Heat Balance error
MaxError.Hf.Abs Display Displays the above stream's Absolute Heat Balance error