Search results
Jump to navigation
Jump to search
- Documentation Link General Options +A Opens the General Options Dialog box. The following options are available: General : Various project options. Access : Various3 KB (18 words) - 00:28, 17 April 2024
- Models (section General Models)will be restricted. These models are used to separate one or more feed streams into two or more discharge products. All models are available with a standard62 KB (2,065 words) - 03:33, 23 April 2024
- the project before sharing of the project with parties with less license options. The image below shows 2 different views of the Model Selection access window5 KB (189 words) - 18:13, 21 March 2023
- and press Apply. If the "Show frame around drawing bounds" option is selected on General Options Graphics tab: When placing the text, try to avoid placing13 KB (1,593 words) - 02:48, 5 April 2024
- Common Data Sections (section Settings and Options)No action required Complete_Reset This option is effectively a combination of all the following SetState options. Reset_Process This will empty a pipe and8 KB (21 words) - 05:56, 16 April 2024
- for more information. Toolbars Opens the General Options > Toolbars tab, used to switch on/off toolbars and customise toolbar buttons. See General Options3 KB (18 words) - 05:44, 16 April 2024
- Definition for more information on the methods and constants used. Please see DSSA Data Sections for more information. The configuration options for the feeder47 KB (2,683 words) - 09:04, 2 February 2024
- Ties and Tanks by use of the General Model using the demand option. Some Unit Models include options to calculate a General Demand which is then fed back14 KB (1,996 words) - 01:30, 6 September 2023
- General Controller (section General Description)trending, etc. General-purpose functions and classes may be defined and used. This document only describes the access window for the general controller, and20 KB (1,211 words) - 03:31, 5 April 2024
- RS - Displays the reactions in a summary table. User can select to display more or less fields. Individual Reactions - When a reaction file is loaded into54 KB (237 words) - 03:41, 9 February 2024
- Access Window (section Options Button)Page Connector for more information about this unit.) Some Access Window display / behaviour options can be set in Tools - General Options - Access Tab. The34 KB (1,045 words) - 23:50, 5 September 2023
- Frequently Asked Questions (redirect from FAQ - General questions)be entitled to use any of these options in Build 139 from August/September 2022. Please see SysCAD Structure for more information on the various add-ons5 KB (726 words) - 03:40, 27 March 2024
- saturation temperature for pure water at that pressure. In general the Saturated or Superheated Vapour options will be meaningless here. In some cases it may be22 KB (1,593 words) - 00:17, 13 December 2023
- Makeup Source (section General Description)LockUp for more information. DTrack - Optional tab that is visible if Qualities - "MatTrack.Action = Create". Please see Material Tracking for more information21 KB (899 words) - 03:34, 5 April 2024
- Flash Tank 2 (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of9 KB (889 words) - 09:29, 2 February 2024
- Flash Train (section General Description)easily identify the flash train. From Tools | General Options | Colours, switch on the Macro Model option. For more hints and troubleshooting, please see Troubleshooting8 KB (1,137 words) - 09:43, 1 February 2024
- Precipitation3 (section General Description)various Model Options, which include: Batch Mode - Batch precipitation in probal mode. Cooling Options - embedded or external heater options are available13 KB (1,592 words) - 09:41, 2 February 2024
- made, it will apply to all projects. Please see General Options Colours See General Options Mouse for more information. If you right click on the Graphics13 KB (1,068 words) - 14:18, 2 August 2023
- style and scale are specified on the General Options - Drawing tab. See Display, Drawing and Link Arrow Options for more information. Update Tear Graphics21 KB (80 words) - 07:50, 17 April 2024
- Makeup Block (MU) (section General Description)configuration file, please see User property Calculations for more information. This option is only usable if user defined properties are present in the75 KB (1,154 words) - 03:33, 5 April 2024
- Species Flow Section (section General)copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations3 KB (296 words) - 04:32, 16 January 2023
- default calculation options for projects using this configuration file. These are described below: Note: The user may still change the options in the project9 KB (506 words) - 10:15, 3 August 2023
- Class (section Class Instance Variable Display Options)in the Access window. See Class Instance Variable Display Options for more information. General keywords: ClassAsGroup: If this keyword is included within46 KB (4,504 words) - 01:29, 12 March 2024
- User Guide ➔ Menu Commands ➔ Tools ➔ General Options Related Links: ETip: Graphics Window Drawing Grids The General dialog box is shown above. Each Tab2 KB (51 words) - 18:55, 21 March 2023
- General Separator (section General Separator Page)Separation Models ➔ General Separator Related Links: Solid-Liquid Separator, Solids PSD Method - Model Theory This model can be used as a general separator, especially6 KB (942 words) - 09:26, 2 February 2024
- procedure: Step 1: Model Selection Step 2: Set up the general project and species data: General Configuration Species Configuration Species Properties11 KB (1,270 words) - 02:55, 5 April 2024
- are calculated using the Standard Species Model. Please see General Bayer Data for some general discussion topics. Some Bayer properties have different calculation28 KB (784 words) - 14:07, 14 March 2024
- Tank (section General Description)material from the Tank, usually without having to use a PID or General controller. Options: The General Model (GM) may be enabled in the tank in Steady State,12 KB (1,353 words) - 18:49, 25 January 2024
- or within the SysCAD Application window. The options for this can be set in General Options on the General tab page. Fixed error when inserting a new pipe114 KB (16,094 words) - 02:05, 24 April 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting49 KB (3,135 words) - 01:11, 7 February 2024
- reports. The archive reporter is significantly faster, has more inbuilt reporting & calculation options and does not require tags to be recorded in the data15 KB (1,320 words) - 11:47, 3 May 2024
- LockUp (section General Description)139.35250 Related Links: Reaction Block (RB) This option is used to 'hide' a percentage of one or more species from any reactions specified in the flowsheet6 KB (519 words) - 19:02, 2 August 2023
- Trend Window (section General Options - Trend Window)the following pop up menu is displayed. All the options available here are global options. All options above are explained earlier with the exception of19 KB (1,903 words) - 07:20, 17 April 2024
- Set Tag Controller (section General Description)Configure a Ratio Controller video General Controller - the user may carry out the same procedures using the General Controller and pgm code. 1. A Ratio13 KB (597 words) - 03:28, 5 April 2024
- Editing User Species Database (section General Notes)Solid and the required Individual Phase Label, usually s; please see General notes for more information. Click on the 'OK' button; You can then enter data for32 KB (2,092 words) - 23:59, 25 April 2024
- SysCAD in logical ways so that you can find and use them quickly. See General Options Toolbars At the bottom of the SysCAD application window there is a Status3 KB (452 words) - 14:52, 1 June 2023
- Pipe (section General Description)enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation23 KB (1,392 words) - 10:18, 3 August 2023
- General Options General (section General)Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ General5 KB (9 words) - 01:56, 6 September 2023
- Size Distribution (PSD) (section General Description)into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. The Size Distribution16 KB (1,279 words) - 23:34, 30 March 2022
- with this command. See Project Settings for more information. Solver Setup Used to set methods and options for Steady State or Dynamic projects. See Solver4 KB (18 words) - 16:01, 2 August 2023
- Evaluation Blocks (section General Description)simultaneously. NB as a general rule, VLE should be called last. Sub-models may be switched on by selecting one of the On options from the drop down menu10 KB (1,668 words) - 04:17, 25 September 2023
- Reactor (Gibbs FEM) (section General Description)only the species of interest. Please see Species Filter for more information on the Filter Options that are available for the species filter. By default, all73 KB (3,653 words) - 05:20, 7 February 2024
- Material Tracking (section General Description)page. The 'Modify' has the same three SetMethod options as the 'Create' with three additional options: None (Hide) - This will hide the configurable fields15 KB (1,732 words) - 18:58, 2 August 2023
- Profile (section General Description)3 sections: Profile tab - Contains general information relating to the unit. P0 tab - The second (and possibly more) section contains details of the tags17 KB (1,330 words) - 05:32, 5 September 2023
- Evaporator (section General Description)Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFeed7 KB (1,469 words) - 03:58, 24 April 2024
- Tie (section General Description)and / or split two or more streams. When streams are mixed in a tie, a homogeneous product is produced. Makeup Blocks (one or more) may be enabled in a9 KB (1,053 words) - 09:22, 2 February 2024
- Tank - Dynamic Mode (section General Description)Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Flow Evaluation Block43 KB (2,552 words) - 16:25, 25 January 2024
- Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Access Related Links: Access Window5 KB (13 words) - 01:59, 6 September 2023
- View for more information. Options Open the General Options - Trends Tab, used to set display options for each trend page. See General Options Trends for6 KB (35 words) - 07:57, 17 April 2024
- Simple Heat Exchanger (section General Description)or HXSizeCalc options are chosen on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on19 KB (948 words) - 09:37, 2 February 2024
- within a General Controller. Transfer Pull may be more suitable to these more complex "local networks". Please see Transfer Push mode for more information8 KB (1,102 words) - 05:10, 7 February 2024
- is used in the Alumina industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). The SSA data is described9 KB (1,306 words) - 18:56, 2 August 2023
- SysCAD Structure (section OLI TCE Option)Navigation: General Information ➔ SysCAD Structure Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 This page provides detailed descriptions8 KB (1,102 words) - 04:41, 6 September 2023
- Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Drawing7 KB (9 words) - 06:03, 2 August 2023
- SysCAD_TagSelect keyword option and enter the required criteria. See SysCAD Tag Select Reports for more information. Running the General Information Report,11 KB (986 words) - 03:35, 5 April 2024
- 2024 - SysCAD 9.3 Build 139.35250 Related Links: TagList Commands, General Options TagList Introduced in Build 139, the TagList Window is for results viewing6 KB (358 words) - 07:13, 17 April 2024
- PID Controller (section General Description)control functions. If the user requires more complicated controls that involves data manipulation, then the General Controller can be used to assist the PID34 KB (2,509 words) - 03:27, 5 April 2024
- Thickener (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of9 KB (803 words) - 05:13, 21 February 2024
- Screen 2 (section General Description)window consists of 4 or more sections, Screen2 - The first section allows the user to enable sub-models and it also contains some general information relating20 KB (2,817 words) - 05:37, 14 May 2024
- Simple Evaporator (section General Description)the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on18 KB (828 words) - 05:04, 7 February 2024
- Direct Contact Heater 2 (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names26 KB (2,038 words) - 09:28, 2 February 2024
- DirectLink (section General Description)The View Options allow the user to display the Species, Component and Elemental flows in columns 2 onwards in different ways. Not all options are available6 KB (594 words) - 09:58, 1 February 2024
- below. Please click on the table headings, or use the navigation above, for more detailed information.17 KB (139 words) - 17:48, 2 August 2023
- Barometric Condenser (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names18 KB (1,286 words) - 09:26, 2 February 2024
- The SysCAD license options are described on the SysCAD License Options page, please see this page for more information on license options available. SysCAD9 KB (1,708 words) - 02:24, 17 April 2024
- selection chosen in the 'Model' field. There are a number of options. Some of these options are valid for both Steady State and Dynamic EHX blocks, and36 KB (1,127 words) - 03:33, 5 April 2024
- AQSol Overview (redirect from AQSol Option)The AQSol SysCAD TCE option and models documentation is for the latest version of SysCAD. The AQSol program can be used for general phase equilibrium calculations11 KB (1,238 words) - 04:42, 26 February 2024
- Signal Waveform (section General Description)Data Points options only) The following sections detail the key differences between input of Data Points and Average Data. The DataPoints options use data19 KB (1,298 words) - 05:23, 7 February 2024
- Reaction Block Summary (section General Description)Target. The last two options, Strict or Target, set the default option for the individual reactions. If the user wants to set the options for individual reactions26 KB (2,722 words) - 03:26, 5 April 2024
- OLI Model Configuration (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting6 KB (1,156 words) - 02:27, 13 March 2024
- Reaction Editor (section Reaction Editor Options)display both the original and some options for a balanced reaction: The user may then either: Select one of the balanced options (Fraction, Decimal or Whole Number)26 KB (2,412 words) - 05:38, 26 April 2024
- Simple Condenser (section General Description)the HXSizeCalc option is ticked on the first tab page. Add to Configuration File Sort either by DLL or Group: See Model Selection for more information on23 KB (1,291 words) - 05:07, 7 February 2024
- Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Find3 KB (9 words) - 10:53, 27 April 2021
- Solvent Extraction Unit (section General Description)Further Discussion for more information. The default access window consists of several sections: SolventExtraction tab - Contains general information relating47 KB (3,928 words) - 05:12, 21 February 2024
- See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting13 KB (1,646 words) - 02:26, 13 March 2024
- Filter Press (section General Description)QFiltrate tab are valid even when the ShowQFiltrate option is not selected. Info tab - Contains general settings for the unit and allows the user to include24 KB (1,632 words) - 09:24, 2 February 2024
- Simple Heater (section General Description)based on the actual duty. Only visible if the HXSizeCalc option is enabled. Info tab - Contains general settings for the unit and allows the user to include20 KB (968 words) - 05:11, 21 February 2024
- Window. Options Open the General Options - Tag List Tab, used to set display options for each Tag List page. See General Options TagList for more information2 KB (36 words) - 08:04, 17 April 2024
- Pipe - Dynamic Mode (section General Description)enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup Block is selected, Only visible if one of more Makeup Blocks are enabled in the Evaluation28 KB (655 words) - 19:00, 2 August 2023
- is the same for all of them. The Display Option can be used to not display the labels, which results in a more compact graphical symbol. The Dynamic bar21 KB (1,196 words) - 10:05, 19 February 2024
- Crusher2 (section General Description)Method for more information. This tab will be visible when the Method selected is 'Whiten Crusher'. See Model Theory - Whiten Crusher Method for more information35 KB (768 words) - 04:54, 14 May 2024
- Flotation Cell (section General Description)shows the sequence of events. See next heading for more information. FlotationCell tab - Contains general information relating to the unit. Recovery - Optional19 KB (1,611 words) - 05:14, 7 February 2024
- Tear (section General Description)first section contains general information relating to the tear block Tear (Dynamic solve mode) - The first section contains general information relating33 KB (570 words) - 05:54, 5 December 2023
- access window. Refer to Access Window - Selection Buttons for more information. Fields in a General Controller can be declared as Concealed variables. They can8 KB (837 words) - 03:41, 27 March 2024
- flowsheet to the size specified on the Graphics page of General Options (Menu command: Tools - general Options). Link Tags Show all Link tags: This command will6 KB (641 words) - 16:58, 2 August 2023
- Noise Controller (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting13 KB (416 words) - 13:50, 1 February 2024
- Falling Film Evaporator 4 (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting33 KB (2,346 words) - 09:40, 20 February 2024
- Slew Rate Controller (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting15 KB (723 words) - 13:52, 1 February 2024
- Washer (section General Description)connected for the unit to operate. Please see General Description or Notes in the Inputs and Outputs section for more information on washer connections based15 KB (1,264 words) - 05:13, 21 February 2024
- Discard Block (DB) (section General Description)user can choose what material should be discarded. Some of the options are described in more detail here with some examples. Available in the following Discard112 KB (2,517 words) - 16:40, 2 August 2023
- Network License (section Network Licensing Options)"TCPIP=Enabled" under [GENERAL] in syscad.ces.ini. Optionally change the default IP Address and/or TCPIP Port. Push OK button. Select the menu option Actions | Start19 KB (3,082 words) - 09:55, 1 February 2024
- page. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block on11 KB (2,072 words) - 04:02, 28 March 2024
- Reverse Osmosis (RO) Unit (section General Description)Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. DB10 KB (795 words) - 09:23, 2 February 2024
- Species Content Section (section General)copy a tag from a table, it will copy its value. For more information, please see Copying Tags for more information. Users can define their own calculations3 KB (315 words) - 06:02, 9 January 2023
- Discard Sink (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting7 KB (364 words) - 10:36, 14 June 2023
- Events (section General Description)consists of 2 sections: Events tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user10 KB (481 words) - 13:51, 1 February 2024
- for reporting. Please see Find Results List and Find Results Report Options for more information. Other example use of Find Query are: Search the project13 KB (750 words) - 16:01, 2 August 2023
- symbol. The colours and different status indicators are described in General Options Colours. Each unit type has its own default Quick View list configuration9 KB (1,024 words) - 18:54, 2 August 2023
- Checkbox Online* ; True or False EnumDropList Options{Acid,Basic,Neutral} ; Define the EnumDropList options Options OperatingMode* ; Set the variable to use11 KB (1,465 words) - 04:14, 13 May 2024
- Drum Filter (section General Description)enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFilterFeed11 KB (855 words) - 04:36, 21 February 2024
- Recommended ways to activate/deactivate area(s) from within SysCAD: From a General Controller (PGM), using the InitialisePreStart trigger subroutine. Via the10 KB (489 words) - 05:41, 16 April 2024
- Queue Profile (section General Description)["P_011.Qm (t/h)"] QueueProfile tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user7 KB (340 words) - 01:37, 6 September 2023
- Scheduled Events (section General Description)configuration. ScheduledEvents tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user11 KB (379 words) - 01:44, 6 September 2023
- following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of22 KB (1,914 words) - 09:40, 2 February 2024
- highlighted in the Secondary Selected colour, which can be set on the General Options Colours page. Controlled Variables are those writable variables (in7 KB (855 words) - 02:06, 15 June 2021
- Disk Centrifuge (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default sections and variable names8 KB (672 words) - 04:35, 21 February 2024
- Evaporative Dryer (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of12 KB (732 words) - 05:11, 21 February 2024
- AQSol Model Configuration (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting7 KB (1,223 words) - 11:24, 2 November 2022
- units, solvent extraction units, and more. The Side Calculation, or the red control volume, is used to read one or more streams and perform a specific calculation19 KB (2,746 words) - 13:43, 1 February 2024
- colour options are Black, Grey (Dark), Light Grey, Off-White and White. The background colour scheme can be changed: From Tools - General Options - Colours16 KB (2,028 words) - 03:06, 5 April 2024
- Classifier (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of8 KB (643 words) - 04:18, 21 February 2024
- industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). For more information, please see Specific Surface1 KB (162 words) - 17:43, 2 August 2023
- industry. However the SSA quality can be used in general in any project (i.e. not necessarily Alumina only). For more information, please see Specific Surface1 KB (167 words) - 16:55, 2 August 2023
- Sugar Vacuum Pan (section General Description)condensing steam heater. Environmental heat loss options are included. There are different user selectable options to describe precipitation rate. Residence time29 KB (2,700 words) - 09:37, 2 February 2024
- PHREEQC Side Calc Model (section General Description)set some general options. TCE tab - This tab allows the user to choose the corresponding PHREEQC Model Configuration unit and set other TCE options. QFeed7 KB (1,712 words) - 04:04, 28 March 2024
- OLI Chemistry Model (section General Description)Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting36 KB (1,383 words) - 13:58, 23 October 2023
- See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (1,933 words) - 04:05, 28 March 2024
- OLI Reactor 2 (section General Description)user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled8 KB (1,721 words) - 02:49, 14 March 2024
- OLI Reactor (section General Description)for more information. The tabs and variable names are described in detail in the following tables. OLIReactor tab - This first tab contains general information29 KB (675 words) - 13:58, 23 October 2023
- configuring the General Model. SysCAD will then not automatically change the stream order, but will retain the user defined priorities. Please see General Model20 KB (2,743 words) - 03:41, 27 March 2024
- PHREEQC Flash Tank (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting8 KB (1,741 words) - 04:05, 28 March 2024
- PHREEQC Evaporator (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (2,350 words) - 04:05, 28 March 2024
- PHREEQC Reactor (section General Description)tables. PHREEQCReactor tab - This first tab allows the user to set some general options. RB - Optional tab, only visible if the Reactions are enabled in the7 KB (1,742 words) - 04:05, 28 March 2024
- OLI Direct Calc Model (section General Description)choose the corresponding OLI Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,6 KB (1,089 words) - 02:47, 14 March 2024
- read/write (GET/SET) tags used by models (e.g. PID controller, PGM files - General controller). NOTES: The list is built during the first iteration of a project7 KB (393 words) - 07:13, 17 April 2024
- specify this sieve series is to use the Q option, with a Q-value of 1.0 Refer to Size Configuration for more detail on sieve series construction. The Alumina339 KB (5,250 words) - 18:32, 2 August 2023
- and unmapped species TCE Configuration Options - This page documents the extra configuration file (cfg) options required when using TCE Add-On in SysCAD3 KB (387 words) - 00:56, 28 March 2024
- Direct Contact Heater (section General Description)Train. General Demand The Direct Contact Heater expects to be connected to a Steam Feeder in Demand mode. See Example under Model Theory for more information18 KB (1,906 words) - 09:24, 2 February 2024
- change the preferences at any time. In SysCAD, from menu Tools > General Options on the General Tab. If Notepad++ was installed properly, then user may simply7 KB (964 words) - 02:14, 15 September 2023
- unit and set other TCE options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in11 KB (2,040 words) - 08:18, 14 March 2024
- Navigation: Main Page ➔ General Information Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 SysCAD is a powerful and versatile plant1 KB (111 words) - 15:01, 1 March 2023
- PHREEQC Direct Calc Model (section General Description)choose the corresponding PHREEQC Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,6 KB (1,197 words) - 02:42, 14 March 2024
- Counter Current Washer (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of11 KB (919 words) - 04:35, 21 February 2024
- NOTE: This option is enabled if the "Prompt to save before solve if models added/removed" option is ticked in the General Options - Generals Tab.7 KB (1,007 words) - 07:42, 17 April 2024
- AQSol Evaporator (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (2,284 words) - 02:45, 14 March 2024
- See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (1,312 words) - 02:26, 13 March 2024
- PHREEQC Feeder Model (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting5 KB (1,257 words) - 04:06, 28 March 2024
- Crusher (section General Description)Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting23 KB (1,654 words) - 09:30, 2 February 2024
- will be processed more quickly within SysCAD and hence is preferred to entering TSpline data. Please refer to Entering Spline Data for more information. See25 KB (1,870 words) - 09:58, 1 February 2024
- Belt Filter (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting17 KB (1,773 words) - 04:11, 21 February 2024
- Downtime (section General Description)the user specifies more than a single downtime event, then there will be additional tabs: T2, T3, etc. Info tab - Contains general settings for the unit25 KB (626 words) - 01:43, 6 September 2023
- Sugar Crusher (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting20 KB (2,104 words) - 09:38, 2 February 2024
- Batch Centrifuge (section General Description)events if sub model options are switched on. See next heading for more information. BatchCentrifuge tab - This first tab contains general information relating11 KB (789 words) - 04:10, 21 February 2024
- Basefiles folder. Please see SysCAD Installation Instructions for more information. In general, projects will upgrade smoothly between Major Builds with little8 KB (1,304 words) - 05:00, 5 October 2023
- Flash Tank (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of10 KB (850 words) - 09:26, 2 February 2024
- AQSol Flash Tank (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting8 KB (1,708 words) - 02:46, 14 March 2024
- PHREEQC Pond Model (section General Description)only visible if Rxns.Option = CRB. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled114 bytes (1,749 words) - 13:23, 6 March 2024
- Potash Evaporator (section General Description)through one or more heat exchangers. This model allows the user to embed these heat exchangers as part of the model. (This is often more efficient when33 KB (1,430 words) - 06:10, 24 April 2024
- Sugar Dryer (section General Description)generally no need for more than 50 segments and typically 30 to 50 is sufficient for accuracy. There is an option to add damping. In general damping is not required27 KB (2,749 words) - 09:23, 2 February 2024
- Get Tag List (section General Description)from the PGM). GetTagListCon tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user6 KB (605 words) - 16:38, 2 August 2023
- into the following types: General purpose - e.g. Tank, Pipe, Feeder, Tie, General controller and PID controller. These general models can be used in conjunctions9 KB (1,571 words) - 01:42, 15 June 2021
- later. The following TCE Add-On options are currently available in SysCAD. Please see Thermodynamic Calculation Engines for more information. AQSol ChemApp1 KB (149 words) - 01:47, 27 March 2024
- slightly off-alignment. For Example: To change the Grid size, goto Tools|General Options|Graphics Tab (Graphics). The redraw button can be used to update the23 KB (2,554 words) - 02:51, 5 April 2024
- configured to prevent this behaviour. Where two or more streams, all with the same quality models mix, then the general rule is to use a mass weighted mean when10 KB (1,566 words) - 01:36, 6 September 2023
- Dynamic Transfer (section General Philosophy)to long and complex control logic within a General Controller. Transfer Pull may be more suitable to these more complex "local networks". Rules applied to11 KB (1,806 words) - 05:32, 5 September 2023
- OLI Solvent Extraction (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting10 KB (1,809 words) - 02:50, 14 March 2024
- summarised in the table below, Common Options for Variable declaration. A list of all options is given at: All Options when Declaring variables. Users may24 KB (1,906 words) - 03:11, 2 May 2024
- please see Project Upgrade for more detail. Shell and Tube Heat Exchanger 2 New Shell and Tube 2 Evaporating Mode New options added to internally bypass a7 KB (848 words) - 12:57, 31 July 2023
- Sugar Species Model (section General Description)into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. There is a set of27 KB (1,424 words) - 13:59, 27 March 2024
- Conveyor Belt (section General Description)profile. This page will only appear if the ShowLoading option is ticked. Info tab - Contains general settings for the unit and allows the user to include32 KB (1,036 words) - 10:54, 22 February 2024
- Related Links: Getting Started, Licensing Please see SysCAD License Options for more information. SysCAD uses a software based licensing system developed8 KB (1,741 words) - 09:53, 26 February 2024
- below. Please click on the table headings for more information, or see Build 139 Release Notes for a more detailed summary.16 KB (65 words) - 01:49, 7 September 2023
- enabled in a unit when the user enables the tickbox for SplitThermal under Options as shown below: A new Tab page becomes visible, SplitT, that the user can then6 KB (492 words) - 10:14, 3 August 2023
- OLI Evaporator (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (2,327 words) - 02:49, 14 March 2024
- OLI Reverse Osmosis Unit (section General Description)unit and set other TCE options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in11 KB (2,080 words) - 08:25, 14 March 2024
- Sugar Juice Screen (section General Description)physically realistic. For all the above options the heat flow is displayed. The Heat Flow is displayed for all options and heat flow from the juice screen16 KB (1,234 words) - 09:31, 2 February 2024
- Sugar Crystalliser (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting33 KB (2,960 words) - 09:37, 2 February 2024
- New, Build 137 Revision History, Upgrading Projects SysCAD 9.3 Build 137 general release was 31 October 2017, but was used selectively from June 2017. Build7 KB (139 words) - 18:34, 2 August 2023
- OLI Side Calc Model (section General Description)set some general options. TCE tab - This tab allows the user to choose the corresponding OLI Model Configuration unit and set other TCE options. QFeed -7 KB (1,678 words) - 02:49, 14 March 2024
- Hot Flash Tie (section General Description)a built-in Water Flash reaction and has limited splitting options. Makeup Blocks (one or more) may be enabled. This allows the user to control the addition9 KB (844 words) - 09:34, 2 February 2024
- Navigation: General Information ➔ License Options Latest SysCAD Version: 23 April 2024 - SysCAD 9.3 Build 139.35250 Related Links: Licensing Within a client's281 bytes (1,311 words) - 23:22, 8 June 2021
- Sugar Mud Filter (section General Description)physically realistic. For all the above options the heat flow is displayed. The Heat Flow is displayed for all options and heat flow from the mud filter to19 KB (1,462 words) - 09:39, 2 February 2024
- Project Files for more information. The available template files are stored in SysCADXXX\Basefiles folder. PGM and MP files - As the general model or model14 KB (2,360 words) - 03:06, 5 April 2024
- Sugar Fugal (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting31 KB (2,776 words) - 09:33, 2 February 2024
- OLI Pond Model (section General Description)only visible if Rxns.Option = CRB. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled89 bytes (1,775 words) - 11:47, 21 February 2024
- Hydrocyclone (section General Description)point The first two options allow the user to set the cut point without any further knowledge of the cyclone. The next three options require the user to49 KB (3,028 words) - 05:35, 14 May 2024
- Solids Recovery Unit (section General Description)enabled. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one or more Makeups are enabled in the Evaluation Block. DB15 KB (1,739 words) - 09:31, 2 February 2024
- reports. The archive reporter is significantly faster, has more inbuilt reporting & calculation options and does not require tags to be recorded in the data8 KB (798 words) - 00:34, 1 July 2021
- Mill (section General Description)Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting23 KB (1,686 words) - 09:39, 2 February 2024
- OLI Sample Model (section General Description)for more information. The tabs and variable names are described in detail in the following tables. OLISample tab - This first tab contains general information22 KB (603 words) - 13:58, 23 October 2023
- a warning. On a slow machine, you can increase the Timeout from the General Options dialog The approach in most examples (Open a new SysCAD, open the project9 KB (976 words) - 18:59, 2 August 2023
- an installed copy of HSC Chemistry for Windows with a valid license. For more information on the Licensed Software HSC Chemistry from Outotec, contact11 KB (1,519 words) - 00:00, 26 April 2024
- Sugar Fugal 2 (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting28 KB (2,097 words) - 09:30, 2 February 2024
- on your license options are: Notepad++ - It is free to download and install under the GPL (GNU General Public License). HSC - For more information on the6 KB (912 words) - 01:57, 6 September 2023
- Precipitator3 Data Sections (section Options)full Solid-Liquid Separator is used for General Separator and Evaporator, please see Solid-Liquid Separator for more information on theory and method. The68 KB (396 words) - 01:37, 22 November 2023
- AQSol Reactor (section General Description)user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled8 KB (1,708 words) - 03:16, 14 March 2024
- Section ➔ Track Related Links: Common Content Section This option is used to 'track' one or more species in a project. e.g. if the user has different feed2 KB (205 words) - 10:45, 20 April 2021
- Section ➔ Track Related Links: Common Content Section This option is used to 'track' one or more species in a project. e.g. if the user has different feed1 KB (194 words) - 10:43, 20 April 2021
- OLI Flash Tank (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting9 KB (1,742 words) - 02:50, 14 March 2024
- AQSol Direct Calc Model (section General Description)choose the corresponding AQSol Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,5 KB (1,042 words) - 02:44, 14 March 2024
- AQSol Side Calc Model (section General Description)set some general options. TCE tab - This tab allows the user to choose the corresponding AQSol Model Configuration unit and set other TCE options. QFeed7 KB (1,682 words) - 03:15, 14 March 2024
- would require additional add-on (and license option) to run. See Example Projects and Project Structure for more information. This folder contains files required13 KB (1,190 words) - 03:38, 5 April 2024
- OLI Feeder Model (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting5 KB (1,288 words) - 02:50, 14 March 2024
- Change Tag (section Bulk Tag Change Option)"Apply Tag Change in PGM files" tickbox has been selected from the General Options Project dialog box. The Change Tag command will also result in tags16 KB (874 words) - 03:58, 17 April 2024
- General Statistics (section General Statistics Page)Navigation: Models ➔ Statistical Models ➔ General Statistics This model is for Dynamic simulation only. The General Statistics unit operation can be used to8 KB (329 words) - 05:17, 7 February 2024
- Thermocompressor (section General Description)the required flow (e.g. Set Tag Controller, PID Controller or General Controller). General Demand: The required flow will be calculated and a warning will21 KB (1,187 words) - 16:40, 2 August 2023
- Single Variable Histogram (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting5 KB (254 words) - 02:31, 29 November 2022
- and LG_Ratio are important parameters to consider. See Cooling Tower for more information on the definition of these fields. Water loss due to Drift, cycles22 KB (3,173 words) - 23:33, 22 April 2024
- AQSol Feeder Model (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting5 KB (1,103 words) - 02:46, 14 March 2024
- Fix the database for any issues and try again. Please also see general notes for more information.5 KB (582 words) - 03:41, 27 March 2024
- Multi-Storage (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting25 KB (1,298 words) - 17:43, 2 August 2023
- described in this section. The general solubility information shown in the access window of pipes, tanks, etc. is described in General Solubility Information in27 KB (1,563 words) - 10:16, 1 February 2024
- for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility16 KB (2,809 words) - 13:05, 15 February 2024
- and Ratio Controllers Section 7 Merging and Modifying Projects Section 8 General Controllers Section 9 Makeups and EHX Section 10 Graphics Window and Bulk3 KB (109 words) - 04:25, 5 April 2024
- ChemApp Side Calc Model (section General Description)set some general options. TCE tab - This tab allows the user to choose the corresponding ChemApp Model Configuration unit and set other TCE options. QFeed6 KB (1,567 words) - 01:42, 13 March 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting9 KB (247 words) - 05:15, 7 February 2024
- window or in General Options Access tab page. New option for using Enter key as short cut for OK button. This can be set in General Options Access tab page42 KB (6,030 words) - 18:10, 2 August 2023
- quality image. Printing Header can be customised, this is done via General Options - Graphics - Title Text for Print Graphics. For some users this doesn't17 KB (2,348 words) - 05:11, 7 February 2024
- for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility8 KB (1,823 words) - 13:03, 15 February 2024
- filter for mass options. Build 23979: For General Separator Density split method add SolidsBypass option and new Lynch separation curve option. Build 137 is33 KB (5,180 words) - 11:24, 14 February 2024
- Feeder model - Temperature & Pressure Requirements for more information. There are now several options for the interpolation method to be used when performing10 KB (1,236 words) - 11:49, 20 February 2024
- Underflow Washer (section General Description)events if sub model options are switched on. The default access window consists of several sections, UnderflowWasher tab - Contains general information relating11 KB (988 words) - 11:32, 21 February 2024
- ChemApp Direct Calc Model (section General Description)choose the corresponding ChemApp Model Configuration unit and set some general options. DInput tab - This tab allows the user to set the final conditions,6 KB (1,158 words) - 06:52, 6 July 2023
- versions in Build 138: Model Configuration - Used to define and view various options for the selected TCE database, including management of mapping of SysCAD6 KB (765 words) - 13:51, 1 February 2024
- an error. Summary of the Excel Report keywords used in SysCAD: NOTES The Options may be provided in any order and are not case sensitive. Make sure when29 KB (2,682 words) - 14:42, 3 April 2024
- On and ElemAudit.On options. The example above shows both the class definition and the use of Class in the same PGM file. In general, if the Class is useful3 KB (357 words) - 00:44, 8 August 2023
- SysCAD Marshal (section SysCAD Marshal Menu Options)ScdFilter: Discontinued. See ScdFilter for more information. ScdCompression: Discontinued. See ScdCompression for more information. ScdConversion: Discontinued33 KB (5,359 words) - 10:13, 1 February 2024
- of 4 people. As SysCAD training is interactive, the smaller the class, the more beneficial the training will be. We use software that allows the trainee14 KB (1,978 words) - 00:17, 5 April 2024
- Window, and enable 'SplitFlows' under the Options heading; Click on the 'Split' tab and select the 'General' option from the Operation drop down list; The12 KB (1,587 words) - 04:14, 13 May 2024
- file in a General Controller for use in a project, do the following: In a project, insert a General Controller. On the access window of the General controller7 KB (491 words) - 09:41, 20 February 2024
- Compressor (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting18 KB (1,997 words) - 09:26, 2 February 2024
- are new options. These may not match your preferences, or what you are used to in SysCAD 9.2. You can review these settings in General Options. The most21 KB (3,316 words) - 04:42, 6 September 2023
- ChemApp Reactor (section General Description)user to set some general options. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled7 KB (1,571 words) - 02:02, 13 March 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting14 KB (1,055 words) - 09:23, 2 February 2024
- Falling Film Evaporator (section General Description)understood, single stage applications. Please use the more robust Falling Film Evaporator 2 for multi-stage and more complex operations. A schematic of the unit12 KB (788 words) - 09:40, 20 February 2024
- boxcar delta parameters need to be changed. This is available in the Options - General - Project tab page. You can enter a filename to which statistics will12 KB (1,370 words) - 19:05, 2 August 2023
- is used to optimise the value of the gain for a PID controller DropList Options{"Maximum Gain", "Minimum Gain", "Geometric Mean"} Class Class_OptimiseGain8 KB (746 words) - 22:58, 25 February 2024
- Window) Use options without the word "custom" for auto sorting; Use options including the word "custom" for manual sorting by phase; Use option "Custom" for14 KB (1,835 words) - 03:18, 5 April 2024
- Heat Exchanger (section General Description)following shows the sequence of events if sub model options are switched on. See next heading for more information. The default access window consists of17 KB (1,749 words) - 05:09, 15 April 2024
- $Prj\MessageLog.csv tick box on the Message Window Options Tab. By default this option is disabled. If this option is enabled, then SysCAD will create the MessageLog22 KB (632 words) - 01:33, 6 September 2023
- Thickener 2 (section General Description)Block. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. QEBFeed23 KB (1,249 words) - 09:23, 2 February 2024
- files and Notepad++ to edit other text files. These options can be changed using the General Options command. There are a number of settings that enable25 KB (4,079 words) - 10:09, 3 August 2023
- for version 1.0.0, replace the correct name as needed. Open SysCAD General Options and set VSCode as the default PGM editor: Note: VS Code is normally7 KB (778 words) - 01:16, 17 July 2023
- Material Body (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting11 KB (588 words) - 12:15, 21 February 2024
- ChemApp Feeder Model (section General Description)See Model Selection for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting4 KB (1,121 words) - 01:45, 13 March 2024
- below: Internal: These are actions initiated by a SysCAD unit, such as a General Controller, PID unit, Profiler, etc. They may also be imitated by the user8 KB (1,292 words) - 18:27, 2 August 2023
- Dynamic Tear recovery options have been improved. Refer to Solver Setting - GlobalTear for explanation of the new fields and options. These improvements6 KB (758 words) - 11:39, 20 February 2024
- Changes Detected - Save Project. This option can be switch on/off in the General Options - General Tab. Added option to allocate graphics page to user-defined8 KB (1,113 words) - 11:50, 20 February 2024
- Piping System Model (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting22 KB (808 words) - 09:37, 2 February 2024
- New, Build 138 Revision History, Upgrading Projects SysCAD 9.3 Build 138 general release was 06 June 2019, but was used selectively from April 2019. Build12 KB (133 words) - 17:54, 2 August 2023
- SysCAD 9.2 Release Notes (section Simplifications; rearrangement of options; and discontinued functionality)ini renamed to "Options.Project.ini" "Scd_PrjAccessFmts.ini" renamed to "Options.AccessFormats.ini" "Scd_Lay.ini" renamed to "Options.WindowArrangement19 KB (3,031 words) - 09:50, 11 March 2024
- differences between these types, please refer to Network Licensing Options. General Notes on Network Licenses: Network licenses are issued for no longer3 KB (439 words) - 04:56, 16 November 2021
- Tanks (for heat transfer) Filters and Washers (for mass separation) and many more... When solving a SysCAD project, the SysCAD Solver will build and solve9 KB (1,479 words) - 12:12, 20 February 2024
- syntax separately. New Mouse Action Defaults : Changed Menu command Options | General Options | Mouse Tab | Default2 Mouse Actions Double Left Click - opens19 KB (2,881 words) - 18:38, 2 August 2023
- ➔ Solid-Liquid Separator Related Links: General Separator, Evaporator The Solid-Liquid Separator sub-model is used in the General Separator, Evaporator and Precipitation3943 bytes (400 words) - 09:58, 22 December 2021
- Bivariate Statistics (section General Description)configuration. BivariateStats tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user5 KB (184 words) - 02:31, 29 November 2022
- Boiler (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting15 KB (777 words) - 04:12, 21 February 2024
- Flash Train Control (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting16 KB (533 words) - 13:54, 1 February 2024
- Class_EvalPlant Tank1 ;Using DropList options - integer value is required Tank1.Unit_Operation_State = 7 ;Using EnumDropList Options, string or integer can be used14 KB (1,480 words) - 06:26, 19 April 2024
- flow or temperature. Please use Copy Tag for secondary tags. If there are more than one report on the same MS Excel worksheet, please make sure the search24 KB (2,037 words) - 17:02, 2 August 2023
- for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility8 KB (1,821 words) - 13:02, 15 February 2024
- Electrowinning Cell (section General Description)the RHX-Power option is allowed. The following shows the sequence of events if sub model options are switched on. See next heading for more information.9 KB (692 words) - 04:36, 21 February 2024
- Discussion: New Reaction Heat Features in Alumina Precipitation Models (section New Calculation Options)are equivalent to the present options of allowing either a default or user-specified value. The additional options give more flexibility - you could specify9 KB (1,310 words) - 01:42, 25 September 2023
- and so can be reproduced if required. Reactions, profiles, script files, general controller files, and PLC configuration files are external files generated10 KB (412 words) - 12:09, 20 February 2024
- for each case where multiple options are available. The databases in this folder will be used to build a list of options presented to the user by the utility8 KB (1,803 words) - 13:02, 15 February 2024
- Pressure Exchanger (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting11 KB (852 words) - 18:52, 2 August 2023
- Simplification of Free-in-Space and Restricted-in-Space collision options. Agglom.UseCorrectedCollision option will show for precip tanks upgraded from earlier builds475 bytes (802 words) - 12:58, 31 July 2023
- Potash Species Model (section General Description)into Configuration file Sort either by DLL or Group. See Model Selection for more information on adding models to the configuration file. The Laliberté solution19 KB (1,624 words) - 10:45, 11 July 2023
- Valve 2 (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting11 KB (723 words) - 09:41, 2 February 2024
- Desuperheater (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting16 KB (1,284 words) - 05:30, 7 February 2024
- Discussion: Annual Climate Data for Dynamic Modelling, Part III (section New Waveform Controller Options)also periodic, it makes sense to extend the waveform controller to handle general periodic data. In this discussion page we demonstrate the use of the updated8 KB (1,193 words) - 08:30, 14 July 2023
- Pump 2 (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting8 KB (769 words) - 09:26, 2 February 2024
- Gas Pump (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting4 KB (306 words) - 09:35, 2 February 2024
- so that the user does not need to configure these in the Tools|Options dialog box general tab page. Various menu, toolbar and dialog box improvements including11 KB (1,683 words) - 01:57, 6 September 2023
- this option, then the species can be displayed in any order - phases may be intermixed, labels added, etc. NOTES: Selecting any of first six options will18 KB (1,289 words) - 03:14, 5 April 2024
- Pump 1 (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting4 KB (313 words) - 09:31, 2 February 2024
- Steam Turbine (section General Description)sections: Turbine tab - This first tab contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user11 KB (976 words) - 05:12, 21 February 2024
- for more information) New variable declaration options: concealed, nan, hidden, tag, stopped, range, comment, help. (See Declaring variable options using13 KB (2,038 words) - 19:09, 2 August 2023
- Heap Leach (section General Description)Block. MUX - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled in the Evaluation Block. QEBFeed44 KB (1,891 words) - 03:59, 14 May 2024
- Scheduled Task (section General Description)further information. SchedTask tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user6 KB (234 words) - 23:55, 15 January 2023
- Discussion: Annual Climate Data for Dynamic Modelling, Part II (section New Waveform Controller Options)look implementing this using some of the advanced capabilities of PGM in a General Controller. The PGM language has built-in functionality for manipulating13 KB (2,019 words) - 08:30, 14 July 2023
- ChemApp light installed for this project to work. See ChemApp Overview for more information. Features Demonstrated A simple project showing how to incorporate26 KB (3,454 words) - 01:10, 23 October 2023
- Valve (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting4 KB (242 words) - 09:41, 2 February 2024
- Tailings Dam (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting23 KB (572 words) - 09:27, 2 February 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting6 KB (658 words) - 04:35, 21 February 2024
- be set in General Options - Graphics. New option to select heading for printing (or copying to bitmap) of SysCAD graphics. See General Options - Graphics16 KB (2,427 words) - 10:14, 1 February 2024
- Change Sieve Series (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting3 KB (239 words) - 04:54, 14 May 2024
- Cooling Tower (section General Description)CoolingTower tab - This first tab contains general information relating to the unit Info tab - contains general settings for the unit and allows the user19 KB (1,556 words) - 04:18, 21 February 2024
- Falling Film Evaporator 2 (section General Description)Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting21 KB (1,534 words) - 09:40, 20 February 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting27 KB (1,183 words) - 10:12, 30 April 2024
- new PlantModel DryAir options we have used the NIST CIPM-2007 dataset as shown above. We are actively developing additional options within SysCAD to include7 KB (978 words) - 00:18, 5 March 2024
- commands or FlyBys. (See General Options Toolbars) The area on the right is shown here: In Dynamic, each time step may have 1 or more iterations to converge2 KB (333 words) - 23:09, 16 October 2022
- Simplification of Free-in-Space and Restricted-in-Space collision options. Agglom.UseCorrectedCollision option will show for precip tanks upgraded from earlier builds454 bytes (1,312 words) - 11:43, 25 May 2021
- Potash Properties Utility (section General Description)the DLL, but it is significantly more efficient to make a single call which returns all of the results. For the more efficient function calls that return18 KB (2,215 words) - 09:54, 1 February 2024
- Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting11 KB (359 words) - 09:29, 2 February 2024
- Reaction Blocks The use of PID controllers The use of General Controllers to provide control options The use of Model Procedures Brief Project Description7 KB (1,008 words) - 04:51, 19 July 2023
- These effects are included as multipliers to modify the Ko term. These allow more flexibility in adapting the precipitation model to a plant using the user’s33 KB (3,902 words) - 23:27, 22 February 2024
- Falling Film Evaporator 3 (section General Description)Project Configuration for more information on adding models to the configuration file. Insert into Project See Insert Unit for general information on inserting30 KB (3,084 words) - 09:40, 20 February 2024
- Set Tag List (section General Description)selecting an appropriate option for SetWhen. TagListCon tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit9 KB (817 words) - 19:09, 2 August 2023
- Reducer (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting3 KB (240 words) - 09:34, 2 February 2024
- Ion Exchange (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting16 KB (1,012 words) - 04:43, 3 April 2024
- Drawing Options as shown below: Notes: These options may also be set in Tools - General Options - Drawing Tab. For a description of the options available4 KB (461 words) - 02:59, 5 April 2024
- 'Minutes' (=m), or 'Seconds' (=s). For more detail on these fields refer to System Settings. Examples of the reporting options for individual tables are given17 KB (1,542 words) - 19:04, 2 August 2023
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting11 KB (431 words) - 09:40, 2 February 2024
- Non return valve (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting4 KB (244 words) - 09:26, 2 February 2024
- page for the "General Split Flows Model" is "Operation". Depending on the option chosen by the user, the access page will change. Each option and its associated4 KB (540 words) - 00:52, 4 July 2023
- pipe) MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeup is enabled in the Evaluation Block. QFeed14 KB (448 words) - 16:44, 2 August 2023
- is displayed. Build 13483: Re-organised general graphics options over two tab pages, including additional options and ability to reset to defaults. Build57 KB (9,089 words) - 09:50, 11 March 2024
- Plant Model - FlwSolve (section Options)Calc Description/Calculated Variables / Options Tag Display This name tag may be modified with the change tag option. Condition Display OK if no errors/warnings6 KB (33 words) - 16:59, 2 August 2023
- of commands for SysCAD to execute. This functionality is similar to the General Controller except the commands are executed as the model is being solved20 KB (1,014 words) - 01:44, 6 September 2023
- Cane Shredder (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting11 KB (833 words) - 09:25, 2 February 2024
- sink. In this example, SysCAD has located the tear in the recycle stream (or more correctly, at the join (flange) between the second tie and the pipe: Now16 KB (2,589 words) - 08:08, 24 November 2023
- Basic Pond Model (section General Description)only visible if Rxns.Option = CRB. MU - Optional tab, or multiple tabs if more than 1 Makeup is selected. Only visible if one of more Makeups are enabled5 KB (614 words) - 13:12, 9 February 2024
- Transmitter (section General Description)one section. Transmitter tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user11 KB (341 words) - 11:45, 21 February 2024
- Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting34 KB (2,555 words) - 05:12, 21 February 2024
- report aqueous flow excluding water. Please refer to General Configuration for more information. The option to define a default Makeup Source in Plant Model4 KB (913 words) - 11:50, 20 February 2024
- re-building in both model configuration files. See Reverse Mapping section for more details. OLI Reactor 2 OR_001 Ca(OH)2 addition is being constrained, this16 KB (2,268 words) - 10:10, 3 August 2023
- the re-circulation flow. Shows the use of PID Controller Shows the use of General Controller for calculations, including use of user defined Class and Matrix16 KB (2,287 words) - 02:48, 25 March 2024
- display options. User can now elect to reuse ONE graphics window and have only one graphics window in view at anytime. This is done via Options|General|Defaults18 KB (2,754 words) - 03:55, 11 September 2023
- ALL of the pipes in the project. Please see SysCAD Tag Select Reports for more information on this type of report. The user may quickly set up an Excel244 bytes (399 words) - 16:30, 20 April 2021
- colour for tears to be shown. To turn on tear colour go to Menu Tools/General Options, open the colours tab and set tears to show in a different colour from14 KB (2,210 words) - 16:28, 20 April 2021
- automatically update. Can no longer report on basis of normal volume flow. More checking of user calculation variable names and project save names, most642 bytes (778 words) - 11:43, 25 May 2021
- evaporators (via the FFE_Logic General Controller). Recirculation flows are set up for the evaporators (via the FFE_Logic General Controller). The Falling Film7 KB (1,039 words) - 17:59, 2 August 2023
- are described below: For many of the property calculations described below, more than one method is available. The user can make a selection of which method19 KB (552 words) - 14:10, 14 March 2024
- Blend Control (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting3 KB (265 words) - 10:55, 22 February 2024
- Actuator (section General Description)Feeder.Qm_Rqd. Actuator tab - Contains general information relating to the unit. Info tab - Contains general settings for the unit and allows the user5 KB (204 words) - 11:45, 21 February 2024
- For example the unit (%) is no longer an option for some species properties and should be replaced with more specific units of measurement such as (%Sol)291 bytes (34 words) - 12:08, 17 May 2023
- Manifold (section General Description)Model Selection for more information on adding models to the configuration file. Insert into Project Flowsheet See Insert Unit for general information on inserting10 KB (213 words) - 13:12, 9 February 2024