Search results

to do the following: ; 1) Define the column number to use for test data ; 2) Sets the test data by executing SetTags (this is equivalent to pressing the

and [math]\displaystyle{ V_2 }[/math] Measured, Previous or Target Values in SysCAD SI Units [math]\displaystyle{ e_a = V_1-V_2 }[/math] Absolute error

For example, the user cannot configure the flash pressure required in the Flash Tank, as the Flash Train will calculate this. If the user has a Tie in a

if the user selects the 'Whiten Crusher' method. Selection/Breakage - The fields visible if the user selects the 'Selection/Breakage' method. Test Data -

Navigation: User Guide ➔ Menu Commands ➔ Tools ➔ General Options ➔ Colours NOTE: The colour layers are in the order of importance, as shown in the following

\dfrac{1}{2dev} }[/math] (if Tavg - dev <= t <= Tavg + dev) Gaussian: [math]\displaystyle{ P(t) = \cfrac{1}{dev\sqrt{2\pi}}\cdot e^{\dfrac{-(t-Tavg)^2}{2dev^2}}

project is solved. Step 2: Insert unit operations Set Tag List and Get Tag List Step 3: Create 2 csv files, one containing the User Defined values for the

Navigation: User Guide ➔ COM Automation ➔ Python Automation ➔ Example - Unit Test Framework Unit Testing is important. Running a model to compare previous

the user to have a large amount of data available. Test data giving the crusher product size distribution for a given feed distribution. The user is required

the model would give the user a warning: SFW wash loss 7.5 is out of user specified range of data points (0 to 5) User without test data may set up a simple

Solve the project in its current build SysCAD 9.2. The last released Major build in SysCAD 9.2 is Build135, user should make sure the project is solved and

SysCADxxx\BasefilesUser\Conversions.db3 SysCADxxx\BasefilesUser\Symbols\*.* SysCADxxx\BasefilesUser\SysCAD.Machine.ini SysCADxxx\BasefilesUser\SysCAD.User.xxxx.ini

requires the user to have a large amount of data available. Test data giving the Mill product size distribution for a given feed distribution. The user is required

Therefore, please take care when using 'QProd', and if necessary test the values by displaying test values from different functions. As an example, when using

required to be able to insert these models into a project, it is required if the user wishes to use any of the PSD methods within the models. Some models require

may be useful if the user is in the feasibility study phase where the SysCAD flowsheet can remain untouched and many sets of test cases need to be performed

Build " & App.VersionNumber(2) & "." & App.VersionNumber(3) Application.StatusBar = "Started " & Version 'MsgBox Version '== Test Build number, and Exit if

then the user can access the Solver Setup (ProBal) dialog box to set the solve options. If one of the Dynamic modes is selected, then the user can access

value to 2 (Acid). Each item in the EnumDropList has an integer value. The names in the EnumDropList list need to be globally unique. If the user does not

er})^2} {\operatorname{MaxI} - \operatorname{MinI}} }[/math] Examples - GC_1.value1 = 100: GetSqr(GC_1.value1,0.2) ;returns 400. Thus (10*0.2)^2 GetSqr(GC_1

recommended. The user specifies how many tables of data are required (maximum is 500), the frequency of reporting (each table may be reported at a user specified

"_Y_", 3) ;r = "SysCAD" (nothing to replace) r = StrReplaceFrom(s, "s", "_Y_", 2) ;r = "Sy_Y_CAD" (case sensitive) w = StrLen(s) ;w = 6 r = StrUpr(s) ;r = "SYSCAD"

alert the user to this. Please refer to section Hints and Comments for more comprehensive hints on how to troubleshoots the controller, user can also have

either be the Feed or the Product Temperature (for methods 2 and 3), depending on which value the user has selected. Notes for "Loss to Ambient 4" The pipe may

opening any dynamic projects, user must first edit the configuration file to select the dynamic solve mode, alternatively, user can select to edit the configuration

Navigation: User Guide ➔ Edit ➔ Find Units using Query Related Links: Quick Find This feature allows user to search Any SysCAD variable using TagSelect

Navigation: User Guide ➔ COM Automation ➔ C++ Automation Below is a C++ source code that can be compiled to a console application. The example is similar

these occur as Halite (NaCl), Sylvite (KCl), Bischofite (MgCl2.6H2O), and Carnallite (KCl.MgCl2.6H2O). Exactly which species are produced in crystallisation

location. See also: How do I send a project to another user? How do I open a project sent from another user? Why can't I open the OLI project created by others

DotProduct = y.inner(y2) ;sum of each element y_i * y2_i, returns 45068 EndSub ;Logic d = a.GetLen() ;gets the array length a.SetAll(2.2/2) ;sets all elements

QFeed and QProd to Compressor, Valve 2, Pump 2, Piping System Model and Pressure Exchanger. Improved management of user selection of conversion units in the

distribution data can be defined as Overall Test Data (PRIMARY_MILL) or Individual Test Data (SECONDARY_MILL). The Crusher2 unit model is used to emulate the mill

quick test is to see if you can create (and then delete) a folder or file in the license folder, if you can't then you don't have the appropriate user permissions

➔ Screen 2 The Screen 2 model allows the user to specify a single screening unit with a number of individual decks, up to a maximum of 8 decks. The user must

the General Separator is unimportant. The user may connect the streams to any position on the unit. If the user disables the unit, by un-ticking the On tick

type of tank (for example, CSTR). For this type of tank, the user may define additional user variables, then define some correlations (functions or subroutines)

we can then assign values: XIn = (c_double*3)() XIn[0] = 0.01 XIn[1] = 0.2 XIn[2] = 0.0 Finally we can actually call the function: rate = pd.rateFn(T, P

a dynamic matrix and manipulate its elements. The user may read in a matrix from a text file. The user may set constant values into a matrix when it is

may contain user defined individual phases. However, the phase description must match what has been defined in the species database. User must check the

}[/math] [math]\displaystyle{ U2 = U1^2 \left(1 + CV^2\right) }[/math] [math]\displaystyle{ U3 = U1^3 \left(1 + 3 CV^2\right) }[/math] The massecuite at

[math]\displaystyle{ C(x) = 1-\left(\cfrac{K_2-x}{K_2-K_1}\right)^{K_3}, \qquad K_1 \lt x \lt K_2 }[/math] Where the parameters K1, K2 and K3 can be entered directly

3. SysCAD 9.2 Build 135 is the last release of SysCAD 9.2. Please see Revision History for SysCAD 9.2 for details on changes in SysCAD 9.2 versions. SysCAD

Navigation: User Guide ➔ Edit ➔ Project Configuration (cfg File) ➔ Calculation Configuration ➔ User Property Expressions NOTES: Function SumPhase() has

equivalent to Real a1*, b1* INTEGER a2{result}, b2{r} ; a2 and b2 are result fields - equivalent to INTEGER a2@, b2@ Real a3{c}, b3{r,c} ; a3 is a concealed

From within the Configuration Editor at Step 2 of 2, double click on a species or click on the Edit User Database button. In the 'Project Configuration'

[math]\displaystyle{ \operatorname{erf}(z) = \dfrac{2}{\sqrt{\Pi}} \,\int\limits_{0}^{z} \, e^{-t^2} \, dt }[/math] Recovery to underflow for a given solid

Navigation: User Guide ➔ View ➔ Plant Model ➔ Settings This tab page on the Plant Model Access Window has a number of parameters that the user may either

from 9.1 to 9.2 see Upgrade to SysCAD 9.2. See SysCAD 9.2 Release Notes for a list of new features and changes from SysCAD 9.1 to SysCAD 9.2 Build 131. Allows

is running. The user specifies how many tables of data are required, the frequency of reporting (each table may be reported at a user specified time) and

stand-alone unit; or as part of a Flash Train. The user sets the operational mode of the Evaporator. However, if the user sets the mode as Flash Train and the Evaporator